V i sh ay Intertechn o l o g y, Inc . I INNOVAT AND TEC O L OGY PNM Series N HN THIN FILM RESISTORS O 19 62-2012 Resistors - Non-Magnetic Thin Film Chip Precision Non-Magnetic Thin Film Chip Resistors Key Benefits • • • • • • • • • Resistance range of 10 Ω to 3 MΩ TCR of ± 25 ppm/°C Tolerance to ± 0.1 % Stable film and performance characteristics: 2000 ppm at 70 °C, 10 000 h Non-standard resistance values available Lead (Pb)-free terminations available Very low noise and voltage coefficient: < - 30 dB, 0.1 ppm/V UL 94 V-0 flame resistant Compliant to RoHS directive 2002/95/EC APPLICATIONS • Medical imaging • High-end audio equipment • Measurement sensing Resources • Datasheet: PNM Series - http://www.vishay.com/doc?60057 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0181-1201 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i sh ay Intertechn o l o g y, Inc . www.vishay.com I INNOVAT O L OGY PNM Series AND TEC N HN THIN FILM RESISTORS O PNM 19 62-2012 Vishay Dale Thin Film Precision Non-Magnetic Precision Thin Film Non-Magnetic Resistor, ThinChip, Film± Chip Resistors Surface Mount 25 ppm/°C, Tolerances to 0.1 % • • • • • Actual Size 1505 These devices eliminate materials that would disturb magnetic fields applications such as in MRI magnetic resonance imaging machines. The PNM series chip resistor has been carefully engineered with non-magnetic materials to eliminate the effects of these stray magnetic fields on circuit performance, thereby resulting in simplified shielding requirements and improved sound quality in audio applications. Providing signal conditioning without distortion from magnetic fields. • • • • • • • • CONSTRUCTION Passivation Tantalum Nitride Resistive Film FILM LOAD LIFE Non-magnetic Moisture resistant High purity alumina substrate Non-standard values available Will pass + 85 °C, 85 % relative humidity and 10 % rated power 100 % visual inspected per MIL-PRF-55342 Very low noise and voltage coefficient (< - 30 dB) Non-inductive Laser-trimmed tolerances to ± 0.1 % Wraparound resistance less than 10 m Sulfur resistant (per ASTM B809-95 humid vapor test)n Halogen-free according to IEC 61249-2-21 definition Compiant to RoHS Directive 2002/95/EC Note * Pb containing terminations are not RoHS compliant, exemptions may apply PNM Solder coating www.vishay.com TYPICAL PERFORMANCE Vishay Barrier layer Dale Thin Film ABSOLUTE High Purity Alumina Substrate Adhesion layer+ 125 °C) STABILITY (at TCRCURVE DERATING 0.1 % 100 Percent of Rated Power 0.06 % 0.05 % STANDARD 0.04 % 0.03 % TEST 0.02 % Material Maximum ELECTRICAL SPECIFICATIONS Absolute Change TOL. 25 0.1 80 SPECIFICATIONS Tantalum nitride 60 Resistance Range 10 to 3 M 0.01 % TCR: Absolute ± 25 ppm/°C to ± 100 ppm/°C 0.006 % 40 Tolerance: Absolute ± 0.1 % to ± 1.0 % 0.005 % 0.004 % Stability: Absolute R ± 0.03 % 0.003 % 20 Stability: Ratio 0.002 % Voltage Coefficient 0.1 ppm/V Working Voltage 75 V to 200 V 0.001 % 0 400 600 Range 800 1000 1200 1400 1600 1800 -2000 Operating200 Temperature 55 °C to + 125 °C 0 Storage Temperature Range - 55 °C to + 150 °C Time in h at + 125 °C Noise < - 30 dB Shelf Life Stability: Absolute - CONDITIONS - 55 °C to + 125 °C + 25 °C 70 125 - °C Ambient Temperature - 150 GLOBAL PARTRATINGS NUMBER INFORMATION COMPONENT Revision 22-Nov-11 Resistors - Non-Magnetic Thin Film Chip FEATURES CASE SIZE (1) POWER RATING (mW) P N M 1 2 0 50 6 E 0402 0502 100 0505 150 GLOBAL CASE TCR RESISTANCE 0603 150 MODEL SIZE CHARACTERISTIC 0805 200 PNM 0402 E = ± 25 ppm/°C The first 3 digits are 0705 200 Non0502 H = ± 50 ppm/°C significant figures 1005 250 last digit magnetic 0505 K = ± 100 ppm/°C and the 1010 500the number resistor 0603 specifies 1206 400 to follow. 0805 of zeros 1505 400 1005 “R” designates the 2208 750 1010 decimal point. 1206 2010 800 1505 Example: 2512 1000 2208 10R0 = 10 Note 2010are the same (only use 0805 1000 = 100 (1) 0705 and 0805 when ordering) 2512 1001 = 1 k WORKING VOLTAGE (V) RESISTANCE RANGE () 0 75 0 2 B B20 to 35K T 1 75 20 to 65K 75 20 to 130K TOLERANCE PACKAGING 75 TERMINATION 10 to 100K 100 10 to 301K BS = BULK B = ± 0.1 % B = Wraparound 100 10 to 301K 100 min., 1 mult D = ± 0.5 % Sn/Pb solder 100 to 301K WS = 10 WAFFLE F=±1% 63 % Sn/ 37 % Pb 50 to 600K 100 min., 1 mult G=±2% S 150 = Wraparound 200 10 to 1M J=±5% lead (Pb)-free solder 150 10 toREEL 1M 96.5 % Sn/3.0 % Ag/ TAPE AND T0 = 100 100 mult 150 10 tomin., 1.75M 0.5 % Cu min., RoHS compliant - e1 T1 = 1000 200 10 to 2M1000 mult (1) T3 = 300 200 10min., to 3M300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult 1 Revision: 22-Nov-11 Document Number: 60057 1 Note For technical questions, contact: [email protected] (1) Preferred packaging code THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PRODUCT SHEET 2/2 VMN-PT0181-1201 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000