THYRISTOR TRIGGER MODULES RT380M B2C PHASE ANGLE THYRISTOR REGULATOR - 230ac or 400Vac supply - Perfect operation with inductive loads - Control voltage selectable 0-5/0-10 V. - Auxiliary 5V supply for the control voltage - 4.000 V galvanic insulation - Triggers the whole range of SEMIKRON thyristors - No external components required. - Works with 50 Hz and 60 Hz The model RT380MU B2C is designed to trigger 4 thyristors in B2C configuration, and can also be used with only 2 thyristors, with a variable delay over the zero crossing of the mains alternating voltage. In this way, the power allowed through to the load by the thyristors is regulated. The load may be supplied with a variable alternating voltage if both thyristors are connected in antiparallel, or with a variable DC-Voltage if both are connected in a controlled- or semi-controlled rectifier assembly. The triggering signal could be a 0-5 V or 0-10 V from a external DC power supply. The user can also use a 10 kOhm potentiometer connected between 5Vout, 0 V and 5 V in pins. This regulator is suitable for a wide range of possible applications, among which are: Illumination control, electric ovens temperature control, d.c. motor speed control, starting and control of induction motor speeds, galvanising bath control, electrolytic process control. ELECTRICAL SPECIFICATIONS: Supply voltage Maximum power drain Triggering current Control voltages Auxiliary output voltage Insulation Supply frequency Operating temperature range Connection type Mounting holes Weight Conforms to VDE standards. 7/03/07 230/400 VAC, +10% / -15% 3W 300 mA @ Vgk=5V 0-5V Rin=5k? 0-10V Rin=10k? 5V Imax=100 mA 4.000 Vca inlet/outlet 47-63Hz 0-50ºC Fast connection, no screws needed for M4 screws 0.24kg 2 30 max Semikron Electronics SL posee el copyright de este plano. Se autoriza su uso única y exclusivamente para el fin para el que ha sido enviado. No se permite su reproducción sin el consentimiento escrito previo de los autores. 25 4, 90 85 K3 G3 K4 G4 5V out Supply Supply Supply 0V 230 Vac 400 Vac K1 G1 K2 G2 0V 5V 10V in in Green LED - ON Escala Material 1:2 Tolerancia Acabado Entre Centros: 0.25 Métrica: 0.5 5 0 85 90 5 0 Denominación Código RT380M PCB 230/400V RoHS Artículo 97492423 Dibujado CO Revisado Rev. 0 10/03/10 RT380Mpcb Fecha