PCN20110501

Product Change Notices
PCN No.:20110501
Date: 05/24/2011
This is to inform you that AME9172M SOP-8/PP series bonding wire material
change will be made to the following product(s). This notification is for your
information and concurrence.
If you require data or samples to qualify this change, please contact AME, Inc.
within 30 days of receiving of this notification.
If we do not receive any response from you within 30 calendar days from the
date of this notification, we will consider that you have accepted this PCN.
If you have any questions concerning this change, please contact:
PCN Originator:
Name: Bill Chou
Email: [email protected]
Expected 1st Device Shipment Date: 05/24/2011
Effective Year/Work Week of Changed Product: NA
Description of Change :
Change AME9172M SOP-8/PP series bonding wire material from Au to Cu wire.
AME9172M SOP-8/PP series Part Number: AME9172M-AZA
Reason for Change:
Vendor notified AME the bonding wire material of SOP-8/PP will be changed from Au to
Cu wire. AME had approved the Qual/REL report as attached.
Qual/REL Plan Numbers: Refer to AME9172M SOP-8/PP Cu wire reliability test report
Qualification:
TEST ITEM
METHOD
DESCRIPTION
Result
HTS
JESD22-A103D
150℃, 1000 hrs
Accept
TCT
JESD22-A104D
-65℃ ~ 150℃,200 cycles, DWELL=15min
Accept
THT (85/85)
JESD22-A101C
85℃,85% RH, 1000hrs
Accept
PCT
JESD22-A102D
121℃, 100% RH, 2atm, 168hrs
Accept
QPM018B-B
REL-1299-D-A
Cu Wire Reliability Report
for
AME9172M SOP-8/PP Series Product
Approved by
Prepared by
Amy Shen
Quality & Reliability Dept.
Manager
Jess Lin
Quality & Reliability Dept.
Engineer
Conclusion:
The AME9172M SOP-8/PP series product has successfully met AME’s reliability standard that is
required on all AME, Inc products.
Furthermore, QRA Dept. of AME, Inc monitors the reliability continuously to make sure that all
AME9172M SOP-8/PP series product will still meet AME’s reliability standard in the future.
Table of Contents:
Ⅰ、General Description
Ⅱ、Product Information
Ⅲ、Package Reliability Test Result
Ⅰ、General Description:
The AME9172M is a voltage regulator which could con-vert the input voltage ranging from 1.2V to 3.0V
to anoutput voltage that user settled. The regulator can pro-vide 2.4A sourcing or sinking current. The
AME9172M used in conjunction with series termination resistors, pro-vides an excellent voltage source for
active termination schemes of high speed transmission lines as those seen in high speed memory buses
and distributed backplane designs. The AME9172M maintains stable, only requires 10µF (or 10µFx2) of
ceramic output capacitance.
The voltage output of the regulator can be used as a termination voltage for DDR SDRAM.
Current limits in both sourcing and sinking mode, plus on-chip thermal shutdown make the circuit
tolerant of the output fault conditions.
Ⅱ、Product Information:
Ⅲ、Package Reliability Test Result:
Test Item
Test Condition
Sample Size / Failures
Result
HTS
Precondition
45 pcs / 0 pcs
Pass
45 pcs / 0 pcs
Pass
45 pcs / 0 pcs
Pass
45 pcs / 0 pcs
Pass
Temp.=150℃
Duration=1000 hours
THT
Precondition
Temp.=85℃, R.H.=85%
Duration=1000 hours
PCT
Precondition
Temp.=121℃, R.H.=100%
2 atm
Duration=168 hours
TCT
Precondition
-65℃ ~ 150℃
200 cycles