EMX2 / UMX2N / IMX2 Transistors General purpose (dual transistors) EMX2 / UMX2N / IMX2 zExternal dimensions (Unit : mm) zFeatures 1) Two 2SC2412AK chips in a EMT or UMT or SMT package. zEquivalent circuits (5) (6) (3) (4) (2) (1) Tr1 Tr2 (4) (5) (5) (6) Tr1 Tr2 (6) (1) 0.5 IMX2 (2) 1.2 1.6 0.13 EMX2 / UMX2N (3) (4) 0.5 0.5 1.0 1.6 0.22 EMX2 (3) (2) (1) ROHM : EMT6 Each lead has same dimensions zAbsolute maximum ratings (Ta=25°C) EMX2 / UMX2N PC IMX2 Junction temperature Storage temperature 150(TOTAL) 300(TOTAL) mW Tj 150 °C Tstg −55 to +150 °C ∗1 1.25 ∗2 2.1 0.1Min. ∗1 120mW per element must not be exceeded. ∗2 200mW per element must not be exceeded. 0~0.1 Collector power dissipation 1.3 2.0 mA 0.9 150 0.65 V IC Collector current 0.65 7 0.7 VEBO (3) V Emitter-base voltage (2) V 50 (1) 60 VCEO (4) VCBO Collector-emitter voltage (6) Collector-base voltage UMX2N (5) Unit 0.2 Limits 0.15 Symbol Parameter Each lead has same dimensions ROHM : UMT6 EIAJ : SC-88 zPackage, marking, and packaging specifications 3000 1.6 2.8 0.3Min. ROHM : SMT6 EIAJ : SC-74 1.1 3000 0.95 0.95 1.9 2.9 8000 0.8 Basic ordering unit (pieces) IMX2 (1) X2 T108 (2) X2 TR (3) X2 T2R (6) Marking Code (5) SMT6 (4) IMX2 UMT6 0~0.1 UMX2N EMT6 0.3 EMX2 0.15 Type Package Each lead has same dimensions Rev.A 1/3 EMX2 / UMX2N / IMX2 Transistors zElectrical characteristics (Ta=25°C) Symbol Min. Typ. Max. Unit Collector-base breakdown voltage Parameter BVCBO 60 − − V IC=50µA Conditions Collector-emitter breakdown voltage BVCEO 50 − − V IC=1mA Emitter-base breakdown voltage Collector cutoff current BVEBO ICBO 7 − − − − 0.1 V µA IE=50µA VCB=60V VEB=7V IEBO − − 0.1 µA VCE(sat) − − 0.4 V IC/IB=50mA/5mA hFE 120 − 560 − VCE=6V, IC=1mA Transition frequency fT − 180 − MHz Output capacitance Cob − 2 3.5 pF Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio VCE=12V, IE= −2mA, f=100MHz ∗ VCB=12V, IE=0mA, f=1MHz ∗Transition frequency of the device. zElectrical characteristics curves COLLECTOR CURRENT : IC (mA) 2 1 25°C −55°C 5 0.5 0.2 0.20mA 0.15mA 40 0.10mA 20 0.05mA IB=0A 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Fig.1 0.4 0.8 1.2 Fig.2 Grounded emitter propagation characteristics 500 DC CURRENT GAIN : hFE Ta=100°C VCE=5V 3V 1V 100 50 20 10 0.2 0.5 1 2 5 10 20 50 100 200 VCE=5V 25°C 200 −55°C 100 50 20 10 0.2 27µA 0.5 1 2 5 10 20 50 100 200 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Fig.4 DC current gain vs. collector current ( Ι ) Fig.5 DC current gain vs. collector current ( ΙΙ ) 24µA 21µA 6 18µA 15µA 12µA 4 9µA 6µA 2 3µA 0 0 2.0 30µA Ta=25°C 8 4 IB=0A 12 8 16 20 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Grounded emitter output characteristics ( Ι ) Ta=25°C 200 1.6 COLLECTOR TO EMITTER VOLTAGE : VCE (V) BASE TO EMITTER VOLTAGE : VBE (V) DC CURRENT GAIN : hFE 0.25mA 60 0 0.1 0 500 80 10 Fig.3 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 10 Ta=100°C COLLECTOR CURRENT : IC (mA) 20 0.50mA mA 0.45 A 0.40m A m 35 0. 0.30mA Ta=25°C VCE=6V COLLECTOR CURRENT : IC (mA) 100 50 Grounded emitter output characteristics ( ΙΙ ) 0.5 Ta=25°C 0.2 IC/IB=50 20 10 0.1 0.05 0.02 0.01 0.2 0.5 1 2 5 10 20 50 100 200 COLLECTOR CURRENT : IC (mA) Fig. 6 Collector-emitter saturation voltage vs. collector current Rev.A 2/3 EMX2 / UMX2N / IMX2 IC/IB=10 0.2 Ta=100°C 25°C −55°C 0.1 0.05 0.02 0.01 0.2 0.5 1 2 5 10 20 50 100 200 0.5 IC/IB=50 Ta=100°C 25°C −55°C 0.2 0.1 0.05 0.02 0.01 0.2 COLLECTOR CURRENT : IC (mA) 5 Co b 1 0.2 0.5 1 2 5 10 20 50 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) Fig.10 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage BASE COLLECTOR TIME CONSTANT : Cc·rbb' (ps) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) Ta=25°C f=1MHz IE=0A IC=0A 2 2 5 10 20 50 100 Ta=25°C VCE=6V 500 200 100 50 −0.5 −1 −2 −5 −10 −20 −50 −100 EMITTER CURRENT : IE (mA) Fig.8 Collector-emitter saturation voltage vs. collector current (ΙΙ) 20 Cib 0.5 1 COLLECTOR CURRENT : IC (mA) Fig.7 Collector-emitter saturation voltage vs. collector current ( Ι ) 10 TRANSITION FREQUENCY : fT (MHz) 0.5 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) Transistors Fig.9 Gain bandwidth product vs. emitter current Ta=25°C f=32MHZ VCB=6V 200 100 50 20 10 −0.2 −0.5 −1 −2 −5 −10 EMITTER CURRENT : IE (mA) Fig.11 Base-collector time constant vs. emitter current Rev.A 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1