IMT4 Transistors General purpose (dual transistors) IMT4 0.3Min. 1.1 0.8 SMT6 T4 T108 Marking Code Basic ordering unit (pieces) 0~0.1 Package 2.8 0.15 IMT4 0.95 0.95 1.9 2.9 (1) (2) 1.6 zPackage, marking, and Packaging specifications Part No. (3) (4) (5) 0.3 IMT4 (6) zExternal dimensions (Unit : mm) zFeatures 1) Two 2SA1514K chips in an AMT package. 2) High breakdown voltage. Each lead has same dimensions ROHM : SMT6 EIAJ : SC-74 JEDEC : SOT-457 3000 zEquivalent circuit IMT4 (4) (5) Tr2 (3) (6) Tr1 (2) (1) zAbsolute maximum ratings (Ta=25°C) Parameter Symbol Limits Unit VCBO VCEO −120 −120 −5 −50 300 (TOTAL) 150 −55 to +150 V V V mA mW °C °C Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Storage temperature VEBO IC Pc Tj Tstg ∗ ∗200mW per element must not be exceeded. zElectrical characteristics (Ta=25°C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Transition frequency Collector-emitter saturation voltage Symbol Min. Typ. Max. Unit BVCBO BVCEO BVEBO −120 −120 − − − − V V −5 − − 180 − − − − 140 − −0.5 −0.5 820 V µA µA − MHz ICBO IEBO hFE fT VCE(sat) − − − − −0.5 V Conditions IC=−50µA IC=−1mA IE=−50µA VCB=−100V VEB=−4V VCE=−6V, IC−2mA VCE=−12V, IE=2mA, f=100MHz IC/IB=−10mA/−1mA ∗ ∗Transition frequency of the device. Rev.A 1/2 IMT4 Transistors zElectrical characteristic curves −50 −8 −20.0 −17.5 −6 −15.0 −12.5 −4 −10.0 −7.5 −5.0 −2 −2.5µA IB=0 −4 0 −8 −12 −10 −5 −2 −1 −0.5 −0.2 −0.1 −16 −20 TRANSITION FREQUENCY : fT (MHZ) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) −0.2 IC/IB=50/1 −0.1 20/1 10/1 −0.05 −0.2 −0.5 −1 −2 −5 −10 −20 −50 COLLECTOR CURRENT : IC (mA) Fig.4 Collector-Emitter saturation voltage vs. collector current EMITTER INPUT CAPACITANCE : Cib (pF) 20 −5V VCE= −1V 200 100 50 −0.2 −0.4 0 −0.6 −0.8 −1.0 −1.2 −1.4 −1.6 Fig.2 Ground emitter propagation characteristics Ta=25°C VCE= −6V Ta=25°C −0.5 500 −0.2 BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.1 Ground emitter output characteristics Ta=25°C DC CURRENT GAIN : hFE −22.5 Ta=25°C VCE= −6V −20 V COLLECTOR CURRENT : IC (mA) −25.0 500 200 100 50 0.5 1 2 5 10 20 50 −0.5 −1 −2 −5 −10 −20 −50 COLLECTOR CURRENT : IC (mA) Fig.3 DC current gain vs. collector current COLLECTOR OUTPUT CAPACITANCE : Cob (pF) Ta=25°C −3 COLLECTOR CURRENT : IC (mA) −10 20 Ta=25°C f=1MHZ IE=0A 10 Cob 5 2 1 −0.5 −1 −2 −5 −10 −20 EMITTER CURRENT : IE (mA) COLLECTOR TO BASE VOLTAGE : VCB (V) Fig.5 Transition frequency vs. emitter current Fig.6 Collector output capacitance vs. collector-base voltage Ta=25°C f=1MHZ IC=0A Cib 10 5 2 1 −0.5 −1 −2 −5 −10 −20 EMITTER TO BASE VOLTAGE : VEB (V) Fig.7 Emitter input capacitance vs. emitter-base voltage Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1