D820 Flanged diaphragm seal with flush diaphragm Main Features Pressure range from 160 mbar to 400 bar Flush diaphragm Temperature -40 °C … 400 °C Class 150 to 2500 NPS 1"1/4 to 4" PN10 to PN100 DN25 to DN100 Applications Oil & Gas / Chemical Water / Waste water Energy Process technic Technical Data This diaphragm seals with flanged process connection and flush diaphragm are used to protect pressure gauges from high temperatures, aggressive or corrosive fluids. The flush diaphragm allows direct mounting on standardized flange connections of pipes or tanks. With the flush diaphragm these seals are used especially for fluids with high viscosity or a tendency to crystallize. Different diaphragm materials can be selected to adapt the seal to various applications and process fluids. Min.pressure ranges See table on page 2 Temperature -40 °C ... +400 °C Filling liquids LRS1: -15 °C ... +150 °C LRS9: -40 °C ... +400 °C high temperature oil Other liquids on request Mounting Direct or remote from 1.5 to 12 meters Flange material Stainless steel 1.4404 (AISI 316L) Flange types ASME B16.5 / EN1759-1: class 150 to 2500, NPS 1 1/4" to 4". EN1092-1: PN 10 to 100, DN 25 to 100. Available flange faces see table on page 3. Other flange types on request. Stainless steel 1.4435 (AISI 316L) Option: Hastelloy, Uranus (see ordering details on page 4) The diaphragm seals can be mounted to pressure gauges or pressure switches directly or with a flexible capillary. For use with electronic transmitters for pressure and differential pressure the product series D9xx is recommended. The filling fluid of the measuring system has to be choosen compatible to the application. Diaphragm Maximum pressure According to the PN or the class of the flange and its standardized pressure temperature relation Design and specifications subject to change without notice Materials N° D820 Stainless steel 1.4404 Diaphragm Stainless steel 1.4435 Hastelloy B2 (2.4617) Hastelloy C276 (2.4819) Hastelloy C4 (2.4610) Uranus B6 (1.4539) Capillary (option) Stainless steel 2015-11-04 Flange www.baumer.com Data sheet A42.01 Page 1 / 4 D820 Flanged diaphragm seal with flush diaphragm Dimensions (mm) Minimum pressure ranges depending on diaphragm diameter Ø M (1) Ø M (2) (mm) f1 C N x ØL DN63 Gauge DN100/150/160 Compound Gauge Compound -1 ... 9 bar 32 0 ... 4 bar -1 ... 9 bar 0 ... 10 bar 38 0 ... 4 bar -1 ... 9 bar 0 ... 6 bar -1 ... 9 bar 45 0 ... 1 bar -1 ... 5 bar 0 ... 4 bar -1 ... 5 bar 54 0 ... 1 bar -1 ... 3 bar 0 ... 1 bar -1 ... 3 bar 89 0 ... 1 bar -1 ... 0 bar 0 ... 0.16 bar -1 ... 0 bar 95 0 ... 1 bar -1 ... 0 bar 0 ... 0.16 bar -1 ... 0 bar ØM Ød1 (1) ØK (2) Fluid temperature -20 ... 100 °C, ambiant temperature -10 ... 50 °C, others on request Ø M according to dimension tables on page 2 and 3 ØD 1"1/4 1"1/2 2" 2"1/2 3" 4" (1) (2) Class ØD ØK ØL N 150 117 88.9 15.9 4 EN1759-1 C (1) 15.9 f1 ANSI B16-5 (1) 1.6 C (1) f1 (1) 16.3 2 Ø d1 (1) Ø M in mm (2) Weight in kg 63.5 38 1.2 300 133 98.4 19 4 19 1.6 19.5 2 63.5 38 1.8 600 133 98.4 19 4 27 6.4 27.7 7 64.5 38 2.3 900/1500 159 111.1 25.4 4 35 6.4 35.6 7 65.5 38 4.2 2500 184 130.2 28.6 4 44.5 6.4 45.1 7 66.5 38 7.4 150 127 98.4 15.9 4 17.5 1.6 17.9 2 73 45 1.6 300 156 114.3 22.2 4 20.6 1.6 21.1 2 73 45 2.7 600 156 114.3 22.2 4 28.6 6.4 29.3 7 73 45 3.3 900/1500 178 123.8 28.6 4 38.2 6.4 38.8 7 73 45 5.8 2500 203 146 31.8 4 50.8 6.4 51.5 7 73 45 10.4 150 152 120.6 19 4 19 1.6 19.5 2 91.9 54 2.4 300 165 127 19 8 22.2 1.6 22.7 2 91.9 54 3.2 600 165 127 19 8 31.8 6.4 32.4 7 91.9 54 4.2 900/1500 216 165.1 25.4 8 44.5 6.4 45.1 7 91.9 54 10.1 2500 235 171.5 28.5 8 57.2 6.4 57.9 7 91.9 54 15.6 150 178 139.7 19 4 22.2 1.6 22.7 2 104.6 54 4 300 190 149.2 22.2 8 25.4 1.6 25.9 2 104.6 54 4.9 600 190 149.2 22.2 8 35 6.4 35.6 7 104.6 54 6.1 900/1500 244 190.5 28.6 8 47.7 6.4 48.3 7 104.6 54 14 150 190 152.4 19 4 23.8 1.6 24.3 2 127 89 5 300 210 168.3 22.2 8 28.6 1.6 29 2 127 89 6.9 600 210 168.3 22.2 8 38.2 6.4 38.8 7 127 89 8.5 900 241 190.5 25.4 8 44.5 6.4 45.1 7 127 89 13.1 1500 267 203.2 31.8 8 54 6.4 54.7 7 127 89 19.2 150 229 190.5 19 8 23.8 1.6 24.3 2 157.2 95 7.1 300 254 200 22.2 8 31.8 1,6 32.2 2 157.2 95 11.6 600 273 215.9 25.4 8 44.5 6.4 45.1 7 157.2 95 17.3 900 292 235 31.8 8 50.8 6.4 51.5 7 157.2 95 22.1 2015-11-04 DN For raised faces, codes G, R. Active diameter. www.baumer.com Design and specifications subject to change without notice Flange dimensions (mm) ANSI B16-5 / EN 1759-1 Data sheet A42.01 Page 2 / 4 D820 Flanged diaphragm seal with flush diaphragm Flange dimensions (mm) EN 1092-1 DN PN ØD C (1) ØK ØL N f1 (1) Ø d1 (1) Ø M in mm (2) Weight in kg 25 10/40 115 16 85 14 4 2 68 32 1.4 32 40 50 65 80 100 (1) (2) 10/40 140 18 100 18 4 2 78 38 2.1 63/100 155 24 110 22 4 2 78 38 3.1 10/40 150 18 110 18 4 3 88 45 2.4 63/100 170 26 125 22 4 3 88 45 4 10/16 165 20 125 18 4 3 102 54 2.9 25/40 180 26 135 22 4 3 102 54 3.2 63 195 28 145 26 4 3 102 54 4.6 145 26 4 3 102 54 5.7 18 8 3 122 54 3.5 100 195 30 10/16 185 18 145 25/40 185 22 145 18 8 3 122 54 4.3 63 205 26 160 22 8 3 122 54 5.7 100 220 30 170 26 8 3 122 54 7.5 10/16 200 20 160 18 8 3 138 89 4.6 25/40 200 24 160 18 8 3 138 89 5.6 63 215 28 170 22 8 3 138 89 6.9 100 230 32 180 26 8 3 138 89 8.9 10/16 220 20 180 18 8 3 158 95 5.7 25/40 235 24 190 22 8 3 162 95 7.6 63 250 30 200 26 8 3 162 95 10 100 265 36 210 30 8 3 162 95 13.3 For raised faces, code B. Active diameter. Ordering codes for flange faces ANSI B16-5 Codes A Flat face Ra = 3.2...6.3 µm Raised face (2) Raised face (7) (3) G R Ra = 3.2...6.3 µm Male tongue large Male tongue small (1) H I Ra = 0.8...3.2 µm Female groove Female groove large Female groove small K L Male spigot large Male spigot small Female spigot large Female spigot small M N Ring joint face Ra = 0.4...1.6 µm (1) (2) (3) G R Type DL Type DS Type E O P Type FC H I Type J A Type A Type B1 B C Type C Ra = 0.8...3.2 µm K L D Type D Ra = 0.8...3.2 µm M Type E E Ra = 3.2...12.5 µm O Ra = 3.2...6.3 µm Q Codes Ra = 3.2...12.5 µm Ra = 3.2...6.3 µm Ra = 3.2...6.3 µm Ring joint face Type CL Type CS (1) (1) EN 1092-1 Ra = 3.2...6.3 µm Ra = 0.8...3.2 µm Ra = 3.2...6.3 µm Female Spigot Type B (1.6) Type B (6.4) (3) (2) Ra = 0.8...3.2 µm Ra = 0.8...3.2 µm Male Spigot A Type A Ra = 3.2...6.3 µm (1) Male tongue Codes Ra = 3.2...6.3 µm (2) Raised face EN 1759-1 F Type F Ra = 3.2...12.5 µm Q N/A Ra = 0.4...1.6 µm Not applicable for 1"1/4 and 1"1/2 Class 150 and 300 Class 600, 900, 1500, 2500 www.baumer.com Design and specifications subject to change without notice Flat face Drawing 2015-11-04 Face Type Data sheet A42.01 Page 3 / 4 D820 Flanged diaphragm seal with flush diaphragm Ordering details D820 D820 – . 2 . Model Flanged diaphragm seals with flush diaphragm D820 Mounting Direct mounting St. steel capillary with St. steel protection St. steel capillary with St. steel protection and PVC sheath St. steel capillary with reinforced St. steel protection For special capillary Ø 2.5 mm (seals mounted on MX, MZ, RP, RD) St. steel capillary Ø 2.5 with St. steel protection St. steel capillary Ø 2.5 with St. steel protection and PVC sheath St. steel capillary Ø 2.5 with reinforced St. steel protection Capillary length Without (direct mounting) 1.5 m 3m 4.5 m 6m 9m 12 m Instrument connection G1/2 female G1/4 female 1/2 NPT female 1/4 NPT female 1/4 NPT male (only with capillary) 1/2 NPT male (only with capillary) Diaphragm coating (1) – 0 1 4 1 A B C 2 3 5 6 A G H J . 0 E 3 F 6 9 D St. steel 316L (1.4435) Uranus B6 (1.4539) Hastelloy B2 (2.4617) Hastelloy C276 (2.4819) Hastelloy C4 (2.4610) Flange face type See table page 3 (codes) DN L H N 8 5 6 Flange standard ANSI B16-5 EN 1092-1 EN 1759-1 Flange material St. steel 316L (1.4404) PN ANSI B16-5 / EN 1759-1 Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500 EN 1092-1 PN10 PN16 PN25 PN40 PN63 PN100 5 6 7 8 9 V E F G H J K L . 2 4 6 ANSI B16-5 / EN 1759-1 1"1/4 1"1/2 2" 2"1/2 3" 4" EN 1092-1 25 32 40 50 65 80 100 2 1 2 3 4 5 6 C D F G N J No coating for flange facing types with groove, codes H, I, K, L, O, P, Q, C, D, F 2015-11-04 Design and specifications subject to change without notice (1) x Without PTFE 0.02 mm HALAR 0.2 mm Diaphragm material www.baumer.com Data sheet A42.01 Page 4 / 4