Three Phase Filters F.LL.D3 series – FP type Residential / Light industrial environments High performance, footprint design Offered as the three phase counterpart to the F.LL.E2. - A.FP type single phase series, these filters boast the same compact dimensions twinned with high performance. Suppression components are mounted on a printed circuit board in a vented aluminium enclosure. • Current ratings from 8A to 17A • High attenuation performance • Space saving, lightweight, footprint or stand alone mounting Mechanical specifications Connections: Electrical specifications Rated voltage (VR): Rated current (IR): Leakage current (IL): Voltage test (2S): Climatic category: Circuit diagram Load aluminium enclosure with ventilation slots. internal components printed circuit board mounted. phases: terminal blocks to accept 16mm2 wire. earth: M4 threaded terminal. Line Manufacture: 480Vac 50/60Hz referred to room temperature = 40°C at VR/ √3, 50Hz, max value lines to ground 2700Vdc line to line 1700Vdc HPF (25/085/21); temperature range: -25°C to +85°C Dimensions (mm) and connections Filter range Code IR (A) F.LL.D3.008A.FP.01 8 F.LL.D3.015A.FP.01 15* F.LL.D3.017A.FP.01 17* IL (mA) 78.3 78.3 78.3 Cx Cy L R (µF) 9x1 9x1 3x1.5 + 6x1 (µF) 2 x 0.47 2 x 0.47 2 x 0.47 (mH) 6x4.5 + 3x0.036 6x4.5 + 3x0.036 6x4.5 + 3x0.036 (MΩ) 3 x0.47 3 x0.47 3 x0.47 * with 2° C/W HSK = See leakage current note on page two Dimensions Code A B C F.LL.D3.008A.FP.01 177.5 185 158 F.LL.D3.015A.FP.01 177.5 185 158 F.LL.D3.017A.FP.01 177.5 185 158 D 138 138 138 E 207 207 207 F 188 188 188 G 5 5 5 H J K 10 6.5 5 10 6.5 5 10 6.5 5 L 46 46 46 M 22.5 22.5 22.5 N O 200 22.5 200 22.5 200 22.5 Insertion loss (Typical) ...F.LL.D3.008A... Approvals – – – Symmetrical (line to line) –––– Asymmetrical (line to ground) ...F.LL.D3.015A... ...F.LL.D3.017A... Made in accordance to VDE, UL and CSA requirements 19