Power Line Filters F.LL.E2 series - SR type Shielded rooms & secure areas The SR series of filters are designed typically for use in shielded compartment type screened rooms, secure communications areas and MRI screened facilities. All models are manufactured to the industry standard performance range and are to a high quality, robust construction. Each filter is designed for direct mounting through the wall of a room, bulkhead or cabinet via a threaded mounting pipe. • Current ratings from 1A to 100A • Industry standard high attenuation performance • Direct mounting via pipe outlet • Robust, quality construction to 100A models can also be used in multiples for • 330Aphase and 3 phase + neutral applications Dimensions (mm) and connections Mechanical Specifications Nickel Plated steel case 1mm thick Internal components sealed with self-extinguishing resin Line: (see table) Load: (see table) tri-rated cable Penetration pipe (see table) Manufacture: Connections: Mounting: Electrical Specifications (see table) Vac 50/60Hz (see table) referred to 40°C (see table) A @ (see table) Vac 50Hz line to ground 2700Vdc (Neons disconnected where applicable) line to line 1700Vdc Climatic category: HPF (25/085/21): Temperature range: -25°C to +85°C Line to Ground Capacitors(C):(see table) per phase Line Resistance(R): < (see table) mΩ Neons: Fitted with ring tags for connection /disconnection Rated voltage (VR): Rated current (IR): Leakage current (IL): Voltage test (2S.): 30A SRW1 Filter Range Code VR IR IL (Vac) (A) (A) C R Neons Pene- Termination tration Line Load (µF) (mΩ) pipe cables F.LL.E2.001A.SR.W2 250 1 0.002 0.023 800 @ 220V - M25 Solder* 20 AWG x 450 F.LL.E2.005A.SR.W2 250 5 0.002 0.023 150 @ 220V - M25 Solder** 18 AWG x 450 F.LL.E2.030A.SR.W2 250 30 0.183 2 @ 220V 6 - M25 M6 12 AWG x 500 F.LL.E2.030A.SR.W1 480 30 2.29 20 @ 277V 14 2 1” M6 NPSL 10 AWG x 700 F.LL.E2.060A.SR.W1 480 60 2.29 20 @ 277V 5.5 2 1” M8 NPSL 6 AWG x 700 F.LL.EU.100A.SR.W1 277 100 4.96 43.2 3.2 @ 277V 1 1” M10 NPSL 2 AWG x 700 *Wiretag accepts 0.75mm2 Note: NPSL = National Pipe Straight Locknut **Wiretag accepts 1mm2 Approvals Facility Filter LISTED 53TB 60A SRW1 Power Line Filters F.LL.E2 series - SR type Circuit diagram Dimensions (mm) and connections 30A SRW1 100A SRW1 60A SRW1 100A SRW1 1A & 5A SRW2 1A & 5A SRW2 30A SRW2 Mounting diagram 30A SRW2 Worldwide Sales Offices FRANCE GERMANY GREAT BRITAIN ITALY JAPAN USA 05/04 Tel: +33 1 69536400 Tel: +49 911 756184 Tel: +44 (0)1327 351515 Tel: +39 051 939111 Tel: +81 3 34428151 Tel: +1 631 5639568 [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] HEAD OFFICE & MANUFACTURING KEMET, Wood Burcote Trading Estate, Burcote Road, Towcester, Northants NN12 6LX. UK Tel: +44 (0)1327 351515 Fax: +44 (0)1327 353761 Web: www.kemet.com Email: [email protected]