METALLIZED POLYPROPYLENE CAPACITOR - FIXED VARIOUS CASE DESIGN SPECIFICATIONS: CAPACITY: tabulated TOLERANCE: shall be indicated by one of the following suffixes: o None ±20%, K ± 10%, J ± 5%, H±3%, G±2% and F±1% WORKING VOLTAGE: 50V and 100V DISSIPATION FACTOR: less than 0.2% at 1KHz and 25°C INSULATION RESISTANCE: shall exceed 250,000 meg/mfd, after two minute charge at the rated voltage and 25°C, need not exceed 400,000 Megohms DIELECTRIC STRENGTH: shall withstand a surge of 150% of the rated voltage for one minute through a limiting resistance of 1 ohm per volt TEMPERATURE RANGE: -55°C to +85°C at full rating to 105°C de-rate 50% LEAD MATERIAL: tinned copperweld wire CASE MATERIAL: material/style are as follows: o o o o o QA2A - Polyester pressure tape wrap with epoxy endfills and of a pressed oval configuration and axial leads QA1A - Polyester pressure tape wrap with epoxy endfills and of a cylindrical configuration and axial leads. QV2A - Pre-molded epoxy case with epoxy potting material of a rectangular configuration and axial lead. QP2A - Pre-molded epoxy case with epoxy potting material of a rectangular configuration and radial lead. QL1A - Tinned brass tube with glass to metal endseals and axial leads. This type is hermetically sealed. Consult factory for tolerance ±1% through 3% on style QA2A, QV2A and QP2A. This specification is issued as preliminary only and the dimensions are subject to slight change if production so indicates. Q SERIES - SPECIFICATIONS Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com DIMENSIONS Style Code MFD 102 123 153 183 203 223 253 273 333 393 473 503 563 683 753 823 104 124 154 184 204 224 254 274 334 394 474 504 564 684 754 824 105 155 205 305 405 505 605 805 .001 .012 .015 .018 .020 .022 .025 .027 .033 .039 .047 .050 .056 .068 .075 .082 .10 .12 .15 .18 .20 .22 .25 .27 .33 .39 .47 .50 .56 .68 .75 .82 1.00 1.50 2.00 3.00 4.00 5.00 6.00 8.00 T .09 .09 .09 .09 .09 .09 .12 .13 .14 .10 .11 .11 .12 .13 .14 .15 .16 .18 .20 .22 .23 .25 .21 .22 .24 .23 .25 .25 .30 .31 .32 .34 .31 .32 .37 .46 .54 .61 .56 .59 QA2A W L .18 .18 .18 .18 .18 .18 .21 22 .23 .19 .20 .20 .21 .22 .23 .24 .26 .27 .29 .31 .32 .34 .30 .31 .33 .32 .34 .34 .39 .40 .41 .43 .46 .46 .52 .61 .69 .76 .76 .79 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .65 .65 .65 .78 .78 .78 .78 .78 .78 .78 .90 1.17 1.17 1.17 1.17 1.17 1.42 1.68 LD D 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 .15 .15 .15 .15 .16 .17 .17 .18 .19 .15 .16 .17 .17 .18 .19 .20 .21 .23 .25 .27 .29 .30 .26 .27 .30 .29 .31 .32 .34 .36 .38 .40 .40 .41 .46 .56 .64 .70 .70 .72 QA1A L LD .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .65 .65 .65 .78 .78 .78 .78 .78 .78 .78 .90 1.17 1.17 1.17 1.17 1.17 1.42 1.68 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 T .16 .16 .16 .16 .16 .16 .16 .16 .17 .16 .16 .16 .16 .17 .17 .17 .23 .23 .23 .29 .29 .29 .29 .29 .29 .29 .29 .39 .39 .39 .39 .39 .39 .39 .56 .56 .56 .56 .56 .76 QV2A W L .24 .24 .24 .24 .24 .24 .24 .24 .29 .24 .24 .24 .24 .29 .29 .29 .36 .36 .36 .42 .42 .42 .42 .42 .42 .42 .42 .54 .54 .54 .54 .54 .54 .54 .72 .72 .72 .72 .72 .96 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .67 .82 .82 .82 .82 .82 .82 .82 1.04 1.24 1.24 1.24 1.45 1.75 1.75 1.95 LD T W QP2A L LD LS D QL1A L LD 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 .16 .16 .16 .16 .16 .16 .16 .16 .18 .18 .18 .18 .18 .18 .18 .18 .18 .24 .24 .30 .30 .30 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .40 .40 .57 .57 .50 .57 .57 .75 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .33 .40 .40 .46 .46 .46 .46 .46 .46 .46 .46 .46 .58 .58 .58 .58 .58 .58 .76 .76 .76 .76 .76 .80 .42 .42 .42 .42 .42 .42 .42 .42 .42 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .55 .67 .67 .67 .82 .82 .82 .82 .82 .82 .82 1.04 1.24 1.24 1.24 1.45 1.75 1.75 1.95 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 22 22 22 20 20 20 20 20 20 20 .30 .30 .30 .30 .30 .30 .30 .30 .30 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .50 .50 .50 .60 .60 .60 .60 .60 .60 .60 .80 1.10 1.10 1.10 1.30 1.60 1.60 1.80 1.95 1.95 1.95 1.95 1.95 1.95 2.35 2.35 2.35 1.95 1.95 2.35 2.35 2.35 2.35 2.35 .312 .312 .312 .312 .400 .400 .400 .400 .400 .400 .400 .400 .400 .500 .500 .500 .500 .500 .562 .670 .670 .670 .750 .750 .625 .625 .625 .625 .625 .625 .625 .625 .625 .750 .750 .750 .750 .750 .750 .750 .750 .750 .750 .750 .750 .750 .875 .875 .875 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.130 1.380 1.380 1.380 1.630 1.880 1.880 2.130 24 24 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com