Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 598 Series Circuit Board Mount Enclosed Fuse Holders for 5×20mm and 5×25mm Fuses Not for new designs; please refer to holder no. 831/834 585 Cap 866 Cap slotted top for 5×20mm fuse with site window for 5×25mm fuse Product Characteristics Compatible Fuse Types 5×20mm 5×25mm Holder: Duroplastic (Phenolplast PF), black 598 Series Holder Cap: Thermoplastic (Polyamide PA 6.6), UL 94 V-0, black Materials Metal Parts: Copper alloy, corrosion protected Terminals: solderable tinned Electrical Data (23ºC) Dimensions a Cap 7,5 M8x0,75 27±0,5 Holder Body 12±0,3 2 13±0,3 = Printed circuit board = (2) Solder pins0.5×1.1mm Protection Class & Category IP 40 (IEC 60529) Operating Temperature -25 °C to 70 °C (consider de-rating) Stock Conditions 10 °C to 60 °C Contact Resistance ≤ 5mΩ Dielectric Strength 3 kV, 50Hz, 1 min., dry Insulation Resistance > 103 MΩ (500 V DC, 1 min.) Solderability 235 ºC, 3 sec. (Wave) 350 ºC, 1 sec. (Soldering Iron) Soldering Heat Resistance 260 °C, 5 sec. Minimum Cross Section Conducting path - 0.2mm2 Marking 598, 250 V Unit Weight 4,9 g (598) / 3,6 g (585) / 3,4 g (586) 1,1 10 10 Ordering Information ø 1,3 +0,1 ø 1,3 +0,1 Holes in the pcb Max. Current/Power: 6.3V / 2.5 W Mounting Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 5 0,5 Rated Voltage: 250V 12,5 12,5 Circuit Board Hole Placement Dimensions Description Ordering Number Cap, 5×20 mm 585 0000 000 Packaging Bulk 100 Cap, 2x25 mm 586 0000 000 Bulk 100 598 Series Holder 598 0000 000 Bulk 100 ø11±0,2 Additional Information 18,5 -0,5 Slot width 1,8 9±0,5 ø8,4±0,1 M8x0,75 4,2±0,2 Datasheet ø11±0,2 19,5 -0,5 Transparent site window (For indicator fuse) M8x0,75 © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13 4,2±0,2 9±0,5 ø8,4±0,1 Resources Samples