Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 870 Series Medical Grade Shock-Safe Holder for 5×20mm Fuses RoHS Pb Product Characteristics 870 Compatible Fuses For Shocksafe, Medical Grade, 5×20mm fuses Holder/Cap: Black Thermoplastic, UL 94V0 Metal Parts: Copper alloy, corrosion protected Materials Terminals: Solderable, tinned Rated Voltage: 250V Electrical Data (23ºC) Rated Current: 10A Rated Power: 2.5W (VDE) Dimensions 870 16,2 35,1 + 0,2 8,9 +0,15 ∅15 SW 14 4,8 max. 7 4 M12,7x1,5 0,5 43,6 + 0,2 Includes Captive Cap 13 -0,3 12,7 -0,1 12 -0,1 Panel alternatives Mounting 12.7mm diameter D-hole or 13mm round hole Admissible torque on plastic hex nut is 1.2Nm Terminals Solderable or 4.8mm quick connect-fits 0.5mm tab Protection Class & Category IP 40 (IEC 60529) PC3 (IEC 60127-6) Live parts are fully inaccessible to a 1mm diameter probe Operating Temperature -40ºC to +85ºC Climatic Test -40ºC/+85ºC/21 days (IEC 60068-2-1...3) Stock Conditions 0°C to 60°C, max. 70% R.H. Contact Resistance ≤ 5mΩ at 20 mV Impulse Voltage 4 kV, 50Hz, 1 min., dry Insulation Resistance > 103 MΩ (500VDC, 1 min.) Solderability 350ºC, 2 sec. acc. to IEC 60068-2-20, Test Ta method 2 Soldering Heat Resistance 350ºC, 10 sec. (IEC 60068-2-20) acc. to IEC 60068-2-20, Test Tb, method 2 Minimum Cross Section Conductor - 2.5mm2 Marking 870, 250V, Approvals Unit Weight 5.6g * Ensure that proper fuse re-rating is factored in fuseholder selection. Agency Approvals Additional Information Agency Agency File Number 40003282 E70164 Datasheet Resources Samples Ordering Information © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 06/12/15 Ordering Number Packaging 870 0000 1009 Bulk 100 Pcs