Cartridge Fuse Holders Enclosed Fuseholders > Panel/Circuit Board Mounted 860/862 Series Enclosed Fuse Holders for 5×20mm and 6.2x32mm Fuses RoHS Pb Product Characteristics 865 Cap FOR 5×20MM FUSES 860 Series Holder PANEL MOUNTED 860 Series Compatible Fuses 862 Series 5×20mm 6.3×32mm Holder/Cap: Black Thermoplastic, UL 94V0 Materials 866 Cap FOR 6.3×32MM FUSES Agency Datasheet 862 Series Rated Voltage: 250V Rated Current: 10A (VDE) 16A (CSA) 20A (UL) Rated Current: 10A (VDE) 16A (UL/CSA) Rated Power: 4.0W (VDE) Rated Power: 862/865: 2.5W (VDE) 862/866: 3.2W (VDE) Mounting 12.7mm diameter D-hole or double D-hole Admissible torque on plastic hex nut is 1.2Nm (2) Solder pins 0.5mm×1.1mm and plastic stud Pins are kicked for optimal soldering Terminals Solderable or 4.8mm quick connect-fits 0.5mm tab Solderable tinned Protection Class & Category IP 40 (IEC 60529) PC2 (IEC 60127-6) IP 40 (IEC 60529) PC2 (IEC 60127-6) Operating Temperature -40ºC to +85ºC Climatic Test -40ºC/+85ºC/21 days (IEC 60068-2-1...3) Stock Conditions +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 500Hz at 10g acceleration Contact Resistance ≤ 5mΩ Impulse Voltage 4 kV, 50Hz, 1 min., dry Insulation Resistance > 103 MΩ (500VDC, 1 min.) Solderability 235ºC, 2 sec. (Wave) 350ºC, 1 sec. (Soldering Iron) Soldering Heat Resistance 350ºC, 5 sec. (IEC 60068-2-20) Minimum Cross Section Conductor - 2.5mm2 Conducting path - 0.2mm2 Marking 860, 250V, Approvals 862, 250V, Approvals Unit Weight 5.3g (860) / 5.6g (862) / 3.3g (865) / 2.5g (866) Electrical Data (23ºC) Agency File Number 860 Series 862 Series 40003287 136720 UG E70164 E70164 Additional Information Datasheet 860 Series Terminals: Solderable tinned 862 Series Holder CIRCUIT BOARD MOUNTED Agency Approval Resources 860 Series Resources 862 Series Samples 860 Series Samples 862 Series Metal Parts: Copper alloy, corrosion protected © 2015 Littelfuse, Inc. Specifications are subject tostrongly change recommended. without notice. Specifications are subject to change without notice. Application testing is Revised: 06/03/15