POWR-GARD® Fuse Datasheet 2.25" 0.263" 7/8" lgr • lmf in-line Fuses and lhr holders 3/4" 0.423" 0.50" Knock-out Hole 0.50" 2.25" Specifications Fast-Acting • 300 VAC Voltage Rating 300 VAC Maximum Interrupting Rating 10 kA ApprovalsStandard 248-14 UL Listed (File: E10480) 0.263" 7/8" CSA Certified (File: LR29862) Used as in-line protection for fluorescent fixtures, this fast-acting fuse is ideal for increasing the safety and reliability of lighting fixtures.3/4" Ordering Information 0.630" / 1 Hole Knock-out 1 1/2 1 2 0.610" 1.82" 0.610" LMF Fuses ampere ratings 1 6/10 0.423" 3 6 2Keyhole Punch 4 7 2 1/2 5 8 series amperage LGR 5 9 10 12 15 — — Catalog Number Ordering Number LGR005 0LGR005.V Specifications Time-Delay • 300 VAC 1.82" Perfect for use in lighting 0.610" systems, this 300 VAC timedelay fuse is designed to handle ballast transformer 1.82" in-rush currents. Voltage Rating 300 VAC Maximum Interrupting Rating 10 kA ApprovalsStandard 248-14 UL Listed (File: E10480) CSA Certified (File: LR29862) Ordering Information / 1/2 6/10 3 10 0.610" 1.82" series LMF / 1 1 1/4 8 10 ampere ratings 1 6/10 2 8/10 2 3 2 1/2 3 2/10 amperage 5 Specifications Used as in-line protection for fluorescent fixtures, the Littelfuse LGR and LMF series fuses and LHR holder offer increased safety and reliability to lighting systems. Voltage Rating 300 VAC 2.25" Ampere Rating LHR000 10 A LHR001 10 A Approvals UL Recognized CSA Certified (File: 73160) 0.50" Flammability Rating UL94 V-0 Example part numberLHR001 0.50" Ordering number 0LHR001T Fuse holders are rated up to 10 amperes at0.50" 300 volts and are equipped with 7" 18 AWG leads. Order part number LHR000 for two leads, and part number LHR001 for one lead; with the other terminal used for insertion of 18 AWG ballast lead. 1 of 1 4 5 6 1/4 7 8 10 Catalog Number Ordering Number LMF005 0LMF005.V LHR Fuse Holder By individually fusing fixtures, electrical problems are 2.25" isolated from the rest of the circuit. The added benefits of this is the ability to quickly identify the problem fixture and reduce the repair time. Littelfuse.com Keyhole Punch LGR Fuses 0.50" 0.50" 0.630" 7/8" 3/4" 0.42 Knock-out Hole Knock-out Hole 0.263" 7/8" Mounting Information 0.630" 3/4" LHR001/LHR000 will fit keyhole punch 0.50" or 0.875" knock-out hole. Anti-rotation feature is provided Knock-out Hole when used with keyhole punch. A “U-shaped” clip is available for panel mounting (packaged 10 clips per bag): Order part 0.610" number LHROCA. Keyhole 0.423" Keyhole KeyholePunch Punch 2.25" 3/4" 0.50" Kno 0.50" 1.82"Littelfuse POWR-GARD® Products © 2013 Rev: 4-A-050113