LITTELFUSE 0LMF03.2V

Special Purpose Fuses
2.25"
0.263"
7/8"
0.630"
3/4"
LGR/LMF In-Line Fuses and LHR Holder
0.423"
0.50"
Knock-out Hole
0.50"
Specifications
LGR Fuses
Fast Acting • 300 VAC
2.25"
Keyhole Punch
Used as in-line protection for
fluorescent fixtures, this fast
acting fuse is ideal for increasing 3/4"
the safety and reliability of lighting
0.50"
fixtures.
Voltage Rating: 0.263"
300 volts AC
7/8"
Maximum Interrupting Rating:
10,000A
Approvals:
Standard 248-14,
0.630"UL Listed (File No: E10480)
CSA Certified (File No: LR29862)
0.423"
Keyhole Punch
Ampere Ratings
Knock-out Hole
0.50"
⁄
12
0.610"
1
11⁄2
1.82"
0.610" Fuses
LMF
Time-Delay • 300 VAC
0.610"
1.82" systems,
Perfect
for use in lighting
this 300 VAC time-delay fuse
is designed to handle ballast
1.82"
transformer in-rush currents.
1 6 ⁄10
2
2 1⁄2
3
4
5
6
7
8
9
10
12
15
Example part number (series & amperage): LGR 1 1⁄2
Specifications
Voltage Rating:
Maximum In­ter­rupt­ing Rating:
Approvals:
300 volts AC
10,000A
Standard 248-14,
UL Listed (File No: E10480)
CSA Certified (File No: LR29862)
⁄
⁄
6 10
⁄
0.610"
1.82"
⁄
3 10
8 10
12
1
1 1⁄4
2 8 ⁄10
3
3 2 ⁄10
4
5
6 1⁄4
7
8
10
Example part number (series & amperage): LMF 2 1⁄2
LHR Fuse Holder
Specifications
Used as in-line protection for
fluorescent fixtures, the Littelfuse
LGR and LMF series fuses and LHR
holder offer increased safety and
reliability to lighting systems. On a
277 volt system, a fault occurring
in an unfused fixture could take out
the entire branch circuit
2.25"affecting
as many as 100 fixtures. This could
cause safety problems as well as
shut down operations.
Voltage Rating:
Ampere Rating:
Approvals:
Flammability Rating:
Example part number:
0.50"
By individually fusing fixtures, these
problems will be avoided. The
0.50"
added benefits of this is the ability to quickly identify
the problem fixture
and reduce the repair time.
1 6 ⁄10
2
2 1⁄2
Special Purpose Fuses
Ampere Ratings
2.25"
7/8"
300 volts AC
LHR 000: 10A
LHR 001: 10A
UL Recognized
0.50"
94VO
LHR 000
3/4"
0.423"
Knock-out Hole
Knock-out Hole
Mounting Information7/8"
Keyhole P
0.263"
LHR 001/LHR 000 will fit keyhole punch or
0.875" knock-out hole. Anti-ro­ta­tion
fea­ture is
3/4"
pro­vid­ed when used with key­hole punch.
0.630"
0.423"
0.50"
A “U-shaped” clip is avail­able forKnock-out
panel mount­
Hole
ing (pack­aged 10 clips per bag): Order part
number LHR OCA.
Keyhole
KeyholePunch
Punch
2.25"
Fuse holders are rated up to 10 amperes at 300 volts and are equipped
with 7" 18 AWG leads. Order part number LHR 000 for two leads, and
part number LHR 001 for one lead with the other terminal used for
insertion of 18 AWG ballast lead.
© 2005 Littelfuse • POWR-GARD™ Products Catalog
www.littelfuse.com
0.610"
3/4"
1.82"
0.50"
0.50"
109