Solder-in Filters Solder-in filters are ideal for use in critical areas where space does not allow use of mounting tools or hardware. The solder-in feature also allows installation in unison with other board mounted components. Primarily used in filtering signal/data lines and DC power lines. Features ■ Small size to allow effective use of space ■ Voltage ratings to 750 VDC ■ Multiple circuit configurations: C, L & Pi available ■ High temperature construction to prevent reflow during installation ■ MIL-F-15733 QPL versions available ø .062 ± .005 (ø 1.59 ± .13) .359 ± .015 (9.11 ± .38) ø A Max. (ø A Max.) ø .040 ± .005 (ø 1.02 ± .13) ø .281 ± .015 (ø 7.14 ± .38) .390 ± .030 (9.91 ± .76) ø B ± .015 (ø B ± .38) .203 ± .015 (5.15 ± .38) ø .190 Max. (ø 4.83) .170 ± .030 (4.34 ± .76) .093 ± .015 (2.38 ± .38) .140 Max. (3.57 Max.) ø .044 ± .005 (ø 1.12 ± .13) Figure 1 Figure 2 ø .281 ± .015 (ø 7.14 ± .38) F .093 ± .015 (2.38 ± .38) .093 ± .015 (2.38 ± .38) .093 ± .015 (2.38 ± .38) .05 ± .01 (1.27 ± .25) .093 ± .015 (2.38 ± .38) ø .190 Max. (ø 4.83) .343 ± .030 (8.73 ± .76) Figure 3 ø .281 ± .015 (ø 7.14 ± .38) ø .190 Max. (ø 4.83) .093 ± .015 (2.38 ± .38) .093 ± .015 (2.38 ± .38) .05 ± .01 (1.27 ± .25) .093 ± .015 (2.38 ± .38) .328 ± .030 (8.33 ± .76) .343 ± .030 (8.73 ± .76) ø .062 ± .005 (ø 1.59 ± .13) Figure 4 Figure 5 Dimensions in inches (mm) API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 LP3 Solder-in Filters Solder-in C Circuit Part Number 54-786-003 See Rated Voltage A B I Pg. LP3 125°C Amp for Fig. In (mm) In (mm) DC 0.156 (3.96) 0.203 (5.16) 1 50 10 Cap* 0.30 µF 1 MHz 32 Minimum Insertion Loss (dB) 1 10 30 100 300 MHz MHz MHz MHz GHz 60 66 70 47 54 10 GHz 70 54-785-002 1 100 10 0.05 µF (min) 16 33 41 45 48 50 50 54794002X5R101M 4 — — — — 250 25 100 pF ± 20% — — — — 10 20 20 54803004X5R101M 3 — — — — 250 25 100 pF ± 20% — — — — 10 20 20 54802002X5R101M 2 — — — — 250 25 100 pF ± 20% — — — — 10 20 20 ✝ 54794002X5R471M 4 — — — — 250 25 470 pF ± 20% — — — 12 22 25 25 ✝ 54803004X5R471M 3 — — — — 250 25 470 pF ± 20% — — — 12 22 25 25 54802002X5R471M 2 — — — — 250 25 470 pF ± 20% — — — 12 22 25 25 ✝ 54802002X5V102P 2 — — — — 250 25 1000 pF — — — 15 25 35 40 ✝ 54803004X5V102P 3 — — — — 250 25 1000 pF — — — 15 25 35 40 ✝ 54794002X5V102P 4 — — — — 250 25 1000 pF — — — 15 25 35 40 ✝ 54-786-077 5 — — — — 750 10 1000pF — 4 — 20 25 35 40 0.125 (3.18) 0.184 (4.67) Also available through API’s authorized distributors. * Tolerances are +100/-0% unless noted. ✝ API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 LP4 Solder-in Filters Solder-in Pi Circuit ø .140 ± .010 (3.56 ± .25) .315 ± .015 (8.00 ± .38) ø D ± .005 (D ± 0.13) A ± .031 (A ± .79) ø .110 ± .005 (ø 2.79 ± .12) B ± .031 (B ± .79) B ± .031 (B ± .79) ø .195 ± .005 (ø 4.95 ± .13) .103 ± .015 (2.6 ± .38) ø D ± .005 (D ± 0.13) ø .140 ± .005 (ø 3.56 ± .12) Figure 1 F .010 (.25) A ± .031 (A ± .79) .115 (2.92) 1.080 ± .031 (27.43 ± .79) Tinned Metal Ground Straps .400 (10.16) ø .140 ± .005 (ø 3.56 ± .12) .093 ± .02 (2.36 ± .51) .156 ± .02 (3.96 ± .51) F Figure 2 B ± .031 (B ± .79) ø .195 ± .005 (ø 4.95 ± .13) A ± .031 (A ± .79) ø 0.32 ± .005 (ø 0.81 ± 0.13) .219 ± .02 (5.56 ± .51) .156 ± .02 (3.96 ± .51) ø .032 ± .005 (ø 0.81 ± 0.13) ø .124 (3.15) .250 (6.35) .415 (10.54) Figure 3 Figure 4 Red Enamel Solder Coating ø .156 ± .015 (ø 3.97 ± .38) ø .085 max. (ø 2.2) ø .040 ± .005 (ø 1.02 ± .13) .265 ± .030 (6.75 ± .76) .020 Ref. (.51) .106 ± .030 (2.69 ± .76) .343 ± .030 (8.73 ± .76) .156 ± .015 (3.97 ± .38) Figure 5 B ± .010 (B ± .25) ø .195 (ø 4.95) ø .145 (ø 3.68) .468 ± .030 (11.91 ± .76) ø .033 min. (.84) A ± .010 (A ± .25) Figure 6 .406 ± .031 (10.31 ± .79) ø .234 max. (ø 5.94) .218 ± .031 (5.54 ± .79) Turret Lead .687 ± .031 (17.45 ± .79) ø .312 ± .031 (7.92 ± .79) Figure 7 .500 ± .031 (12.70 ± .79) Figure 8 F Dimensions in inches (mm) API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 LP5 Solder-in Filters Solder-in Pi Circuit Rated Voltage M15733 See 125°C D A B I Min MIL Pg. LP5 Part Number Number for Fig. In Cap DC In In AC Amp (mm) (mm) (mm) 3 0.312 (7.92) 0.469 (11.91) 0.032 (0.81) 70 — 10 1500 pF 51-703-013* /62-0003 Minimum Insertion Loss (dB) 10 1 1 10 30 100 300 MHz MHz MHz MHz MHz GHz GHz — 5 12 50 50 65 65 2 0.268 (6.81) 0.780 (19.81) 0.032 (0.81) 70 — 10 0.012 µF 5 22 50 70 70 65 65 ✝ 1234-000* € — 2 0.257 (6.53) 0.780 (19.81) 0.032 (0.81) 70 — 10 0.012 µF 5 25 50 70 70 70 70 51-749-304 — 4 51-750-309* /62-0004 — — — — — — 70 — 10 0.012 µF 5 25 50 70 70 65 65 — — — — — — 1234-001 — 4 70 — 10 0.012 µF 5 25 50 70 70 65 65 ✝ 51-750-301* — 2 0.250 (6.35) 0.780 (19.81) 0.032 (0.81) 70 — 10 0.012 µF 5 25 50 70 70 70 70 ✝ 1233-000* € — 3 0.312 (7.92) 0.780 (19.81) 0.032 (0.81) 70 — 10 0.022 µF 7 35 60 70 70 70 70 ✝ 51-750-302* — 3 0.312 (7.92) 0.780 (19.81) 0.032 (0.81) 70 — 10 0.022 µF 7 25 60 70 70 70 70 51-750-313 /51-0002 3 0.312 (7.92) 0.780 (19.81) 0.032 (0.81) 70 — 10 0.022 µF 7 25 60 70 70 70 70 — 5 200 — 10 1300 pF — 5 15 30 45 55 55 /62-0002 1 1.140 (28.96) 1.277 (32.44) 0.032 (0.81) 200 — 10 1500 pF — 5 12 45 50 70 70 — 1 1.109 (28.17) 1.206 (30.63) 0.032 (0.81) 200 — 10 1500 pF — 5 15 40 50 70 70 — 3 0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 — 10 1500 pF — 8 17 45 65 70 70 — 3 0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 — 10 1500 pF — 5 15 45 50 70 70 3 0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 140 10 1500 pF — 3 15 45 50 70 70 ✝ 51-723-303 51-713-010 ✝ 1251-001 € 51-703-001* ✝ 1203-050 € 51-703-012* /62-0001 — — — — — — 51-713-002 — 1 1.103 (28.01) 1.212 (30.78) 0.032 (0.81) 200 — 10 1500 pF — 5 12 40 70 70 70 1214-029 — 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 — 10 1750 pF — 5 15 50 60 60 70 ✝ 1214-007 € — 6 0.093 (2.36) 0.157 (3.99) 200 — 10 1750 pF — 5 15 35 50 60 60 — 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 — 10 1750 pF — 8 17 50 65 70 70 — 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 — 10 1750 pF — 5 15 50 50 60 60 ✝ 51-707-006* /33-0001 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 90 10 1750 pF — 5 15 50 50 60 60 51-707-007 /33-0002 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 90 10 1750 pF — 5 15 50 50 60 60 51-707-026 /66-0001 6 0.288 (7.31) 0.157 (3.99) 200 — 10 1750 pF — 5 15 35 50 50 50 — 2 1.123 (28.52) 1.347 (34.21) 0.040 (1.02) 200 — 10 3000 pF — 7 25 50 65 65 65 51-707-002* ✝ 1214-001* ✝ 51-750-322 — — — — 3 0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 200 10 5500 pF — 15 30 55 65 70 70 1223-012 — 1 0.240 (6.10) 0.360 (9.14) 0.040 (1.02) 200 — 15 3000 pF — 7 25 50 65 65 65 ✝ 1204-050 € — 7 0.210 (5.34) — — — — 500 — 25 3000 pF — 8 25 50 65 70 70 /40-0001 7 0.234 (5.94) — — — — 500 350 25 3000 pF — 7 25 55 65 70 70 51-703-007* /51-0001 51-704-002 * ✝ € Denotes parts with turret on one end per Figure 8. Also available through API’s authorized distributors. Also available through API’s authorized European distributors/agents. API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 LP6