Spec Mini-Press 9925 Series This new knurled filter is designed to be pressed into place and create a reliable mechanical bond. This feature makes it an excellent selection for applications where soldering is undesirable. Suitable plating is available that allows gold bonding to the terminals. Applications These filters are ideal for microwave and RF applications such as attenuators, synthesizers, and oscillators. They perform well in high impedance circuits where large capacitance values are not practical. Installation ■ .136" to .137" (3.45-3.48mm) diameter hole ■ Hole must be free of all insulating materials. ■ Installation tool must have a hole of sufficient depth and diameter to accept the terminal of the filter. ■ Installation force must be applied gradually and smoothly until the flange of the filter is seated against the receiving part (request installation instructions). .156 ( .005 dia. (3.96 ( .127 dia.) .625 (15.88) ref. .025 (0.635) .250 .010 ( .030 ( .002 (6.35 (.254 (.762) (.051) .030 ( .002 dia. .020 (.762 ( .005 ( .051 (.508 dia.) Epoxy (.127) Seal .143 ( .002 (3.63 ( .051) Glass Seal End Straight Knurl, 160 D.P. .110 (.005 (2.79 (.127) Built and tested in accordance with MIL-F-15733. .128 ( .005 dia. (3.25 ( .127 dia.) Figure 1 Dimensions in inches (mm) Mechanical Specifications Installation . . . . . . . . . . . . . Press-in Plating . . . . . . . . . . . . . . . . Gold Seal . . . . . . . . . . . . . . . . . . Glass sealed on one end, . . . . . . . . . . . . . . . . . . . . . resin sealed on the other end Termination Options . . . . . . Plating suitable for gold . . . . . . . . . . . . . . . . . . . . . bonding Operating Temperature . . . . -55°C to +125°C Circuit Schematic Input Insertion Tool Output Part Number: SCI-9925-200 Ground Rated Voltage 125°C Part Number ✝ SCI-9925-153 ✝ SCI-9925-303 ✝ SCI-9925-502 ✝ SCI-9925-000 ✝ SCI-9925-101 ✝ SCI-9925-501 ✝ SCI-9925-122 SCI-9925-272 Figure 1 1 1 1 1 1 1 1 DC 50 50 100 200 200 200 200 200 Minimum Insertion Loss (dB) I Amp 5 5 5 5 5 5 5 5 Cap 0.015 µF +100%/-0% 0.030 µF +100%/-0% 5000 pF +100%/-0% 10 pF max. 100 pF +100%/-0% 500 pF +100%/-0% 1200 pF +100%/-0% 2700 pF +100%/-0% 1 MHz 7 10 — — — — — — 10 MHz 25 30 15 — — — 5 10 30 MHz 30 35 20 — — — 10 18 100 MHz 40 45 30 — 3 15 20 25 300 MHz 40 50 35 — 10 22 28 33 1 GHz 60 55 45 10 20 35 35 40 10 GHz 60 55 55 10 28 40 45 50 ✝ Also available through API’s authorized distributors. Note: Parts are RoHS Compliant API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 LP11