V i s h ay I n t e r t e c h n o l o g y, I n c . Capacitors - Aluminum SMD for High Temperature I INNOVAT AND TEC O L OGY 140 CRH N HN VISHAY BCcomponents O 19 62-2012 140 CRH SMD Aluminum Capacitor, RoHS Compliant Key Benefits • • • • • • High-temperature operation (125 ºC) Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, lead (Pb)-free reflow solderable Charge and discharge proof, no peak current limitation Vibration proof, 4-pin version and 6-pin version, AEC-Q200 qualified Additional features for MAL214099xxxE3 parts: –– Extended useful life to 6000 h at 125 °C –– High-temperature reflow soldering per JEDEC J-STD-020 APPLICATIONS • RoHS compliant electronic circuits in automotive, industrial and renewable energy systems • Filtering of unwanted noise • Smoothing of DC voltages • Buffering of electrical energy • Decoupling of super-imposed AC ripple Resources • Datasheet: 140 CRH - http://www.vishay.com/doc?28396 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 RoHS AUTOMOTIVE GRADE One of the World’s Largest Manufacturers of COMPLIANT Discrete Semiconductors and Passive Components e3 PRODUCT SHEET 1/2 VMN-PT9179-1304 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ Fig. 1 Aluminum Capacitors • Charge and discharge proof, no peak current limitation FEATURES SMD (Chip), High Temperature V i s h ay I n t e r t e c h n o l o g y, I n c . • Material categorization: For definitions of compliance Capacitors - Aluminum SMD for High Temperature I INNOVAT 140 CRH 140 CRHCapacitors SMD Aluminum Capacitor, Aluminum Compliant SMD (Chip), HighRoHS Temperature O L OGY 140 CRH VISHAY BCcomponents HN • Extended useful life for MAL214099...E3AND TE C N pleaseFEATURES see www.vishay.com/doc?99912 O parts to 6000 h at 125 °C • Extended useful high life temperature for MAL214099...E3 QUICK REFERENCE DATA • Parts for advanced reflow APPLICATIONS www.vishay.com parts to 6000 h at 125 °C Vishay BCcomponents soldering according to JEDEC J-STD-020 DESCRIPTION VALUE • SMD technology, for high temperature reflow soldering 19 available 62-2012 • Parts for advanced high temperature reflow Nominal case sizes 8 x 8 x 10 • Industrial and professional applications soldering according to JEDEC J-STD-020 (L x W x H in mm) to 18 x 18 x 21 • Vibration proof, 4-pin version and 6-pin version • Automotive, general industrial, telecom available 10 μF to 4700 μF Rated capacitance range, CR • AEC-Q200 qualified • Smoothing, filtering, buffering • Vibration proof, 4-pin version and 6-pin version 140 CRH 146 CTI ± 20 % Tolerance on CR • Polarized aluminum electrolytic capacitors, non-solid 125 °C Lower Z FEATURES • AEC-Q200 electrolyte, selfqualified healing MARKING 6.3 V to 63 V Rated voltage range, www.vishay.com UR 140 CRH Lower temp. • Extended useful life •for MAL214099...E3 146 CTI Vishay BCcomponents Polarized aluminum electrolytic capacitors, non-solid 125 °C • SMD-version (in with Lower -Z55 °C to + 125 °C μF) base plate, lead (Pb)-free reflow Category temperature range parts to 6000 h •atRated 125 °Ccapacitance electrolyte, self healing solderable • Rated voltage (in PROCESS V) reflow Lower ADVANCED SOLDERING PROFILE (Pb)-FREE REFLOW 150 CRZ temp. Endurance test at 125 °C 1000 h toFOR 5000 hLEAD • Parts for advanced high temperature • SMD-version with proof, base no plate, (Pb)-free • Charge and discharge peak lead current limitationreflow ACCORDING TO JEDEC J-STD-020 soldering according JEDEC J-STD-020with IEC 60062 • Dateto code, in accordance 140 C solderable Useful life at 125 °C 1500 h to 6000 h • Material categorization: For definitions of compliance 150 CRZ Fig. 1 available www.vishay.com • Black mark or “-” sign indicating the cathode (the anode is • Charge discharge proof, no peak current limitation Useful life at 40 °C Vishay BCcompone please see and www.vishay.com/doc?99912 1 000 h T (°C) 150 000 h to 500 • Vibration proof, 4-pin version 6-pin edges) version identified byand bevelled 1.8 x lR applied Fig. 1 • Material categorization: For definitions of compliance www.vishay.com ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS Vishay BCcom TPeak 140 DATA www.vishay.com www.vishay.com AEC-Q200 qualified • Code indicating group number (H)CRH APPLICATIONS Shelf QUICK life at 0 V, REFERENCE 125 °C 1000 h• TO ACCORDING JEDEC J-STD-020 please see www.vishay.com/doc?99912 230 www.vishay.com 140 CRH DESCRIPTION VALUE t4 BCcomponents Vishay 146 CTI • Polarized aluminum electrolytic capacitors, • SMD technology, for highnon-solid temperature soldering ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW reflow PROCESS on sectional specification 217IEC 60384-18/CECC 32300 125Based °C Lower Z ADVANCED SOLDERING FOR LEAD PROFILE (Pb)-FREE REFLOW ADVANCED SOLDERING FOR LEAD PR (Pb t3 PROFILE QUICK REFERENCE DATA ACCORDING PACKAGING APPLICATIONS TO JEDEC J-STD-020 electrolyte, self healing 200 Nominal case sizes 8 x 8 x 10 T (°C) ACCORDING TO JEDEC J-STD-020 • Industrial and professional applications ACCORDING TO JEDEC J-STD-020 ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS IEC 60068 55/125/56 190 LowerClimatic temp.(L xcategory DESCRIPTION W x H in mm) TO JEDEC J-STD-020 to 18 x VALUE 18 x 21 T Supplied• in blister tape on reel SMD technology, for high reflow temperature reflow soldering ACCORDING Peak • SMD-version with •base plate, lead (Pb)-free Automotive, general industrial, telecom T (°C) t 230 Nominal case sizes 8solderable x4700 8 x 10 10 μF to μF Rated capacitance range, CR 2 T (°C)professional applications Tt4 (°C) • Industrial and 217 150 TPeak • Smoothing, filtering, buffering (L x W x H in mm) to 18 x 18 x 21 t 150 CRZ t3T T (°C) TPeak Peak 1 200 ±•20 % Tolerance on CR Charge and discharge proof, no peak 230 current limitation 230 • Automotive, general industrial, telecom 190 t T 230 140 CRH Rated capacitance range, Peak CR 230 Fig.voltage 1 Rated range, UR 217 Tolerance on CR Category temperature range 200 190 Rated voltage range, UR QUICK REFERENCE DATAtest at 125 °C Endurance 150 Category temperature range ESCRIPTION Useful life at 125 °C VALUE 25 Endurance test at 125 °C ominal case sizes Useful life at 40 °C 8 x 8 x 10 x W x H in mm) to 18 life at 125 °Cx 18 x 21 1.8 Useful x lR applied 4 10 μF to 4700 μF 217 217 217 t3 6.3 • V to 63 V Material categorization: For definitions of compliance • Smoothing, filtering, buffering 200 200 MARKING t2 t4 200 190 ± 20 % see 150 www.vishay.com/doc?99912 190 190 please t1 • Ratedt3 capacitance (in μF) - 55 °C to + 125 °C t2 t2 MARKING 6.3 V to 63 V 150 • Rated voltage (in 150V) 150 1000 hAPPLICATIONS to 5000t2h t1 t1 • Rated capacitance (in μF) - 55 °C to + 125 °C t1 Datetemperature code, in accordance with IEC 60062 1500 h• to 6000technology, h SMD for•high reflow soldering • Rated voltage (in V) 1000 h to 5000 h t t t2 t1 • Blackapplications mark or “-” sign indicating the cathode (the anode is • Industrial and professional • Date code, in accordance identified by bevelled edges) with IEC 60062 time (s) • Automotive, general industrial, telecom • Black mark orgroup “-” sign indicating • Code indicating number (H) the cathode (the anode is 1000 h 25 25 25 150 000 h to 500 000 filtering, h • Smoothing, buffering time (s) identified by bevelled edges) Fig. 5 - Maximum temperature load during reflow soldering 150 000 h to 500 000 h 1500 h to 6000 h 25 10 °C μF ated capacitance range,Shelf CRUseful at 125 40 life atlife 0 V, °Cto 4700 μF 1.8 x lR applied ± 20 % 25 olerance on CR Based on sectional specification IEC 60384-18/CECC 32300 PACKAGING • Code indicating group number (H) Shelf life at 0 V, 125 °C 1000 h time (s) Fig. 5 - Maximum temperature load during reflow soldering MARKING 6.3 V to 63 V ated voltage range, U R Climatic Revision: 23-Apr-13 Document Number: 28396 category IEC 60068 55/125/56 1 time (s) tape on reel Supplied in blister TableBased 5 on sectional specification IEC 60384-18/CECC 32300 Fig. 5 - during Maximum temperature load reflow solderi • Rated contact: capacitance (in μF) Fig. 5 -during Maximum temperat [email protected] Fig. 5 - Maximum temperature load reflow soldering ategory temperature range - 55 °C to + 125 For °C technical questions, PACKAGING Table 55 - Maximum temperature load during reflow soldering Fig. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT Climatic category IEC 60068 55/125/56 REFLOW SOLDERING CONDITIONS• for MAL214099xxxE3 Rated voltage (inFORTH V) Supplied in blister tape on reel ndurance test at 125 °C 1000 to 5000 h TOREFLOW AREhSUBJECT SPECIFICSOLDERING DISCLAIMERS, SET Table 5 AT CONDITIONS forwww.vishay.com/doc?91000 MAL214099xxxE3 Table 5 Table 5 CASE CODE CASE CODE CASE CODE • Date code, in accordance with IEC 60062 TableFEATURES 5 PROFILE seful life at 125 °C 1500 h to 6000 h PROFILE FEATURES CASE CODE CASE CASE CODE REFLOW SOLDERING CONDITIONS forCODE MAL214099xxxE3 REFLOW SOLDERING for MAL2140 1010 1213for TO 1216 1616CONDITIONS TO 1821 REFLOW SOLDERING CONDITIONS MAL214099xxxE3 1010 1213 TO 1216 1616 TO 1821 REFLOW SOLDERING CONDITIONS for MAL214099xxxE3 • Black mark or “-” sign indicating the cathode (the anode is CASE CODE CASE CO CASE CODE seful life at 40 °C PROFILE FEATURES CASE CODE FEATURES CASE CODE CASE 150 500 000 hMax. time from 1010 1213 TO 12 Max. time from 25 000 °C toh TtoPeak 300 300 s PROFILE 300 s 1010 PROFILE 25identified °CFEATURES to TPeaksby bevelledCASE 300 s1616 CASE CODE CODE300 s CASE CODE 300 s 1213 TO 1216 edges) 8 x lR applied 1010 T PROFILE FEATURES 1010 1213 TO 1216 1616 TO 1821 Max. time from 253°C to TPeakMax. time from 25 °C 3 toK/s TPeak3003s K/s 300300 s s Max. ramp-up rate tofrom 1503indicating °C K/s 3 K/s K/s 3 K/s300 s Code (H) Max.• time 25 °C to TPeakgroup number 300 s 30 300 s 300 s 300 s Max. ramp-up rate to 150 °C 3 K/s 3 K/s Max. ramp-up rate to 150 °C 3 K/s ) 150 s 150 s 150 s Max. time from 150 °C to 200 °C (t 1 Max. ramp-up150 rate s to 150 °C 3 K/s s 3 150 s3 K/s 150 Max. time from °C to 200 °C (t32300 1) ased on sectional specification IEC 150 60384-18/CECC Max. ramp-up rate to 150 °C 3 K/s 3 K/s 3 K/s PACKAGING 150 s(t1) 150 s Max. time from 150 °C to 200Max. °C (ttime 1) from 150 °C110 to 200 Max. time from to 200 110 s s °C150 110150 s s 15 2) 200 °C (t ) 150 s s Max.190 time°C from 150 °C °C (tto 1 Max. time 190150 °C to to 200 110 s 110 s limatic category IEC 60068 55/125/56 150 s110 s s 150 s Max.from time from °C 200°C °C (t (t21)) Max. time from 190 °C to 200Max. °C (ttime s Supplied in blister tape on150 reel 2) from 190 °C to 200110 °C s(t2) 110110 0.5 K/s to 3 K/s110 0.5 K/s to 3 K/s 0.5 K/s to 3 sK/s11 Ramp up rate from °C190 to T°C Peak Max. time200 from to 200 °C (t2) s 110 s Max. time from 190 °C to 200 °C (t2) 110 s 110 s 110 s 0.5 K/s to 3 K/s 0.5200 K/s°Ctoto3Ramp Ramp up rate from 200 °C to TPeak K/s to 3 to K/s3 K/s toK/ 3 Ramp up rate from TK/s Peak up rate from 200 0.5 0.50.5 K/sK/s to 3 °C0.5 to TK/s Peak (217 200 °C) (t°C 90 s 0.5 K/s to 3 K/s 90 s 0.5 K/s 90 s0.5 K/s Max. time above TLiquidus 3) to T to 3 K/s Ramp Peak0.5 K/s to 3 K/s 0.5up K/srate to 3from K/s 0.5 K/s to 3 K/s Ramp up rate from 200 °C to TPeak (217Max. °C) (ttime Max. time above TLiquidus 3) above TLiquidus (21790 °C)s90 (t3)s 90 90 s s Max. time above TLiquidus (217 °C) (t3)Max. time above 230 °C (t90) s 70 s 90 s 90 s 65 s 60 s 4 TLiquidus (217 °C) (t3) 90 s 9 Max. time90 above s 90 s 90 s Max. time above TLiquidus (217 °C) (t3) Max. time above 230 °C (t4) Max. time above 230 °C (t4) 70 s 65 70 s s Max. time above 230 °C (t4) 70230 s °C (t4) 1 60ss Number: 28396 260 °C65 s 70 s 250 °CDocument 245 °C Peak temperature TPeak Revision: 23-Apr-13 Max. time above 65 6 Max. time above 230 °C (t4) 70 s 65 s 60 s 260 °C Peak temperature TPeak 260250 °C °C Peak temperature TPeak For technical questions, contact: [email protected] °C 40 250 s 30 s 30 s Max. time above TPeak minus 260 °C 250 24 Peak temperature T5Peak 260 °C °C 245°C °C Peak temperature TPeak 260 °C 250 °C 245 °C Peak temperature TPeak 5 °C time above TPeak minus 40 s time above TPeak minusMax. °C 40 30 s s THIS DOCUMENT TO CHANGE WITHOUT NOTICE.Max. THE PRODUCTS DESCRIBED HEREIN AND5THIS DOCUMENT Revision: 23-Apr-13 IS SUBJECTRamp-down Document Number: 28396 1 rate from T 3 K/s to 6 K/s 3 K/s to 6 K/s 3 K/s to 6 K/s 5 SET °C FORTH s 30 s 3 Max. time40 above minus5 5°C °C sLiquidus 30 s AT www.vishay.com/doc?91000 30 s Max.above time above TPeak ARE SUBJECT TO SPECIFIC DISCLAIMERS, minus 40TsPeak minus s 40 s Max. time TPeak Ramp-down rate from 30 TLiquidus 3 K/s to 30 6 K/s 3 K/s 6 Ramp-down rate from TLiquidus 3 K/s to 6toK/s For technical questions, contact: [email protected] Notes Ramp-down 3 K/s to 6 K/s 3 K/s to 6 K/s Ramp-down rate from TLiquidus 3 K/s to 6rate K/sfrom TLiquidus K/s to 6 K/s 3 K/s to 6 K/s Notes 3THE THIS rate DOCUMENT IS SUBJECT TO CHANGE NOTICE. PRODUCTS HEREIN 3AND DOCUMENT 3 K/s • Temperature measuring top of the case and on3terminals Ramp-down from TLiquidus 3 WITHOUT K/spoint to 6 on K/s K/s to Notes 6DESCRIBED K/s K/s THIS to 6 K/s measuring point on top of themeasuring case and point on terminals ARE SUBJECT SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 • Temperature on top of the case and on terminals Notes Notes • Max. 2 TO runs with pause of min. 30 min•in Temperature between • Max. 2 runs with pause of min. 30 2 min in between Max. runs with pause of min. 30 min in between and on terminals • Temperature measuring point on top of the case and on• terminals Notes • Temperature measuring point on top of the case • Max. 2 runs with pause of min. 30 min in between • Max. 2 runs with pause of min. 30 min in between °Ch helf life at 0 V, 125 °C Max. ramp-up rate to 150 1000 Revision 23-April-13 Max. time from 25 °C to TPeak • Temperature measuring point on top of the case and on terminals • Max. 2 runs with pause of min. 30 min in between PRODUCT SHEET 2/2 VMN-PT9179-1304 ision: 23-Apr-13 Document Number: 28396 1 technical contact: [email protected] This document isFor subject toquestions, change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO Revision: 23-Apr-13 Document Number: 6 Revision: 23-Apr-13 6 Revision: 23-Apr-13 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 For technical questions, contact: [email protected] For technical [email protected] Revision: 23-Apr-13 Document Number:questions, 28396 contact: For technical questions, cont ARE SUBJECT TO SPECIFIC DISCLAIMERS,Revision: SET FORTH AT www.vishay.com/doc?91000 6 23-Apr-13 Documen 6 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT