VISHAY MAL215099403E3

150 CRZ
www.vishay.com
Vishay BCcomponents
Aluminum Capacitors
SMD (Chip), Very Low Z
FEATURES
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte, self healing
• SMD-version with base plate, lead (Pb)-free
reflow solderable
• Very low impedance, very high ripple current
• Charge and discharge proof, no peak current limitation
140 CRH
125 °C
• Parts for advanced high temperature reflow soldering
according to JEDEC J-STD-020
146 CTI
Lower Z
• Compliant to RoHS Directive 2002/95/EC
High temp.
• Vibration proof, 4-pin version and 6-pin version
• AEC-Q200 qualified
150 CRZ
153 CRV
Lower Z
• Extended useful life for MAL215099...E3 parts to
10 000 h at 105 °C
Fig. 1
APPLICATIONS
QUICK REFERENCE DATA
DESCRIPTION
Nominal case sizes
(L x W x H in mm)
Rated capacitance range, CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
6.3 V to 63 V:
100 V:
Endurance test at 105 °C
• Industrial and professional applications
4.7 μF to 10 000 μF
• Automotive, general industrial, telecom
± 20 %
MARKING
- 55 °C to + 105 °C
- 40 °C to + 105 °C
2500 h to 10 000 h
125 000 h to 500 000 h
Climatic category IEC 60068
6.3 V to 63 V:
100 V:
Revision: 17-Jun-11
• Rated capacitance (in μF)
• Rated voltage (in V)
2000 h to 8000 h
Useful life at 40 °C;
1.8 x lR applied
Based on sectional
specification
• Smoothing, filtering, buffering
6.3 V to 100 V
Useful life at 105 °C
Shelf life at 0 V, 105 °C
• SMD technology, for high temperature reflow soldering
VALUE
8 x 8 x 10
to 18 x 18 x 21
• Date code, in accordance with IEC 60062
• Black mark or “-” sign indicating the cathode (the anode is
identified by bevelled edges)
1000 h
• Code indicating group number (Z)
IEC 60384-18/CECC 32300
PACKAGING
55/105/56
40/105/56
Supplied in blister tape on reel
1
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm)
UR (V)
CR
(μF)
100
10 x 10 x 10
10 x 10 x 10
10 x 10 x 10
10 x 10 x 10
47
68
100




8 x 8 x 10
10 x 10 x 10
150



8 x 8 x 10


10 x 10 x 12
220


8 x 8 x 10
8 x 8 x 10
10 x 10 x 10
12.5 x 12.5 x 16
10 x 10 x 14
10 x 10 x 12
330

8 x 8 x 10
8 x 8 x 10
10 x 10 x 10
12.5 x 12.5 x 13
16 x 16 x 16
10 x 10 x 14
16 x 16 x 21
10 x 10 x 12
470
8 x 8 x 10
8 x 8 x 10
10 x 10 x 10
12.5 x 12.5 x 13

10 x 10 x 14
18 x 18 x 16
10 x 10 x 12
680

10 x 10 x 10
12.5 x 12.5 x 13 12.5 x 12.5 x 16
16 x 16 x 16
18 x 18 x 21
10 x 10 x 14
10 x 10 x 12
16 x 16 x 21
1000
10 x 10 x 10
12.5 x 12.5 x 13 12.5 x 12.5 x 16
16 x 16 x 16
10 x 10 x 14
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21

12.5 x 12.5 x 13 12.5 x 12.5 x 16
16 x 16 x 16
1500
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
2200 12.5 x 12.5 x 13 12.5 x 12.5 x 16
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21

16 x 16 x 16
3300
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
4700
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
6800
18 x 18 x 16
10 000
18 x 18 x 21
-
16







4-pin:
Ø 12.5 mm
HMAX.
MAX 0.3
35







50






8 x 8 x 10
6-pin:
≥ Ø 16 mm
HMAX.
MAX 0.3
D
WMAX.
B
B
LMAX.
63



8 x 8 x 10
8 x 8 x 10
10 x 10 x 10
10 x 10 x 10
10 x 10 x 12
10 x 10 x 14
12.5 x 12.5 x 13
35V
1000u
3R-H
25V
1000u
A4-H
25V
220 u
A4-H
D
WMAX.
L1MAX.S
25







min. 0.4/max. 1.0 (2 x)
2-pin:
≤ Ø 10 mm
min. 0.4/max. 1.0 (2 x)
4.7
10
22
33
10







min. 0.4/max. 1.0 (2 x)
6.3







HMAX.
MAX. 0.3
D
WMAX.
B
L1MAX. S
LMAX.
L1MAX. S
LMAX.
Fig. 2 - Dimensional outline
Revision: 17-Jun-11
2
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
Table 1
DIMENSIONS in millimeters AND MASS
NOMINAL
CASE SIZE
LxWxH
CASE
CODE
LMAX.
WMAX.
HMAX.
ØD
BMAX.
S
L1MAX.
MASS
(g)
8 x 8 x 10
0810
8.5
8.5
10.5
8.0
1.0
2.2
10.2
 1.0
10 x 10 x 10
1010
10.5
10.5
10.5
10.0
1.0
3.5
12.1
1.3
10 x 10 x 12
1012
10.5
10.5
12.5
10.0
1.0
3.5
12.1
1.5
10 x 10 x 14
1014
10.5
10.5
14.3
10.0
1.0
3.5
12.1
1.5
12.5 x 12.5 x 13
1213
12.9
12.9
14.0
12.5
1.3
3.6
14.9
2.6
12.5 x 12.5 x 16
1216
12.9
12.9
16.5
12.5
1.3
3.6
14.9
2.8
16 x 16 x 16
1616
16.6
16.6
17.5
16.0
1.3
6.5
18.6
5.5
16 x 16 x 21
1621
16.6
16.6
22.0
16.0
1.3
6.5
18.6
6.0
18 x 18 x 16
1816
19.0
19.0
17.5
18.0
1.3
6.5
21.0
8.0
18 x 18 x 21
1821
19.0
19.0
22.0
18.0
1.3
6.5
21.0
8.3
Table 2
TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES
NOMINAL
CASE SIZE
LxWxH
CASE
CODE
PITCH
P1
TAPE WIDTH
W
TAPE
THICKNESS
T2
REEL DIAMETER
PACKAGING
QUANTITY
PER REEL
8 x 8 x 10
0810
16
24
11.6
380
500
10 x 10 x 10
1010
16
24
11.6
380
500
10 x 10 x 12
1012
16
24
12.8
330
250
10 x 10 x 14
1014
16
24
15.4
330
250
12.5 x 12.5 x 13
1213
20
24
16.2
380
250
12.5 x 12.5 x 16
1216
24
32
18.5
380
200
16 x 16 x 16
1616
28
44
18.9
380
150
16 x 16 x 21
1621
28
44
23.4
380
100
18 x 18 x 16
1816
32
44
18.9
380
125
18 x 18 x 21
1821
32
44
23.4
380
100
Note
• Detailed tape dimensions see section “PACKAGING”.
Revision: 17-Jun-11
3
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
MOUNTING
SOLDERING
The capacitors are designed for automatic placement on to
printed-circuit boards.
Soldering conditions are defined by the curve, temperature
versus time, where the temperature is that measured on the
component during processing.
Optimum dimensions of soldering pads depend amongst
others on soldering method, mounting accuracy, print
layout and/or adjacent components. For recommended
soldering pad dimensions, refer to Fig. 3 and Table 3.
For maximum conditions refer to Fig. 4 or Fig. 5.
Any temperature versus time curve which does not exceed
the specified maximum curves may be applied.
As a general principle, temperature and duration shall be the
minimum necessary required to ensure good soldering
connections. However, the specified maximum curves
should never be exceeded.
e
a
c
a
d
b
f
b
b
d
a
c
a
a
Case size Ø D ≤ 10 mm
c
a
Case size Ø D ≥ 16 mm
Case size Ø D = 12.5 mm
Fig. 3 - Recommended soldering pad dimensions
Table 3
RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters
CASE CODE
a
b
c
d
e
f
0810
4.4
2.5
3.0
-
-
-
1010
4.4
2.5
4.0
-
-
-
1012
4.4
2.5
4.0
-
-
-
1014
4.4
2.5
4.0
-
-
-
1213
6.3
2.5
4.0
4.2
5.0
5.6
1216
6.3
2.5
4.0
4.2
5.0
5.6
1616
7.8
9.6
4.7
-
-
-
1621
7.8
9.6
4.7
-
-
-
1816
8.8
9.6
4.7
-
-
-
1821
8.8
9.6
4.7
-
-
-
Revision: 17-Jun-11
4
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
STANDARD SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS
T (°C)
TPeak
230
217
t4
t3
200
150
t2
t1
time (s)
Fig. 4 - Maximum temperature load during reflow soldering
Table 4
REFLOW SOLDERING CONDITIONS for MAL215097xxxE3
CASE CODE
0810 TO 1014
CASE CODE
1213 TO 1216
Max. time from 25 °C to Tpeak
240 s
200 s
Min. ramp-up rate to 150 °C
3 K/s
3 K/s
Max. time from 150 °C to 200 °C (t1)
150 s
120 s
0.5 K/s to 3 K/s
0.5 K/s to 3 K/s
Max. time from 200 °C to 217 °C (t2)
60 s
60 s
Max. time above TLiquidus (217 °C) (t3)
90 s
60 s
Max. time above 230 °C (t4)
40 s
30 s
250 °C
240 °C
Max. time above Tpeak minus 5 °C
5s
10 s
Max. ramp-down rate from TLiquidus
3 K/s to 6 K/s
3 K/s to 6 K/s
PROFILE FEATURES
Ramp up rate from 200 °C to Tpeak
Peak temperature Tpeak
Notes
• Temperature measuring point on top of the case and on terminals.
• Max. 2 runs with pause of min. 30 min in between.
Revision: 17-Jun-11
5
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS
ACCORDING TO JEDEC J-STD-020
T (°C)
TPeak
230
217
t4
t3
200
190
t2
150
t1
25
time (s)
Fig. 5 - Maximum temperature load during reflow soldering
Table 5
REFLOW SOLDERING CONDITIONS for MAL215099xxxE3
CASE CODE
1010 TO 1012
CASE CODE
1213 TO 1216
CASE CODE
1616 TO 1821
Max. time from 25 °C to TPeak
300 s
300 s
300 s
Min. ramp-up rate to 150 °C
3 K/s
3 K/s
3 K/s
Max. time from 150 °C to 200 °C (t1)
150 s
150 s
150 s
Max. time from 190 °C to 200 °C (t2)
110 s
110 s
110 s
0.5 K/s to 3 K/s
0.5 K/s to 3 K/s
0.5 K/s to 3 K/s
Max. time above TLiquidus (217 °C) (t3)
90 s
90 s
90 s
Max. time above 230 °C (t4)
70 s
65 s
60 s
260 °C
250 °C
245 °C
40 s
30 s
30 s
3 K/s to 6 K/s
3 K/s to 6 K/s
3 K/s to 6 K/s
PROFILE FEATURES
Ramp up rate from 200 °C to TPeak
Peak temperature TPeak
Max. time above TPeak minus 5 °C
Ramp-down rate from TLiquidus
Notes
• Temperature measuring point on top of the case and on terminals.
• Max. 2 runs with pause of min. 30 min in between.
Revision: 17-Jun-11
6
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
Electrolytic capacitor 150 CRZ series
SYMBOL
DESCRIPTION
CR
Rated capacitance at 100 Hz, tolerance ± 20 %
IR
Rated RMS ripple current at 100 kHz, 105 °C
IL2
Max. leakage current after 2 min at UR
tan 
Z
470 μF/35 V; ± 20 %
Nominal case size: 12.5 mm x 12.5 mm x 13 mm; taped on
reel
Ordering code: MAL215099012E3
Max. dissipation factor at 100 Hz
Max. impedance at 100 kHz
Note
• Unless otherwise specified, all electrical values in Table 6 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
Table 6
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
6.3
10
16
25
CR
(μF)
NOMINAL CASE SIZE
LxWxH
(mm)
IR 105 °C
100 kHz
(mA)
IL
2 min
(μA)
tan 
100 Hz
470
1000
2200
4700
6800
6800
10 000
330
470
680
1000
1000
1500
2200
3300
4700
4700
6800
220
330
470
680
680
1000
1500
2200
3300
3300
4700
150
220
330
470
470
680
1000
1500
2200
2200
3300
8 x 8 x 10
10 x 10 x 10
12.5 x 12.5 x 13
16 x 16 x 16
16 x 16 x 21
18 x 18 x 16
18 x 18 x 21
8 x 8 x 10
8 x 8 x 10
10 x 10 x 10
10 x 10 x 12
10 x 10 x 14
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
16 x 16 x 21
18 x 18 x 16
18 x 18 x 21
8 x 8 x 10
8 x 8 x 10
10 x 10 x 10
10 x 10 x 12
10 x 10 x 14
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
16 x 16 x 21
18 x 18 x 16
18 x 18 x 21
8 x 8 x 10
8 x 8 x 10
10 x 10 x 10
10 x 10 x 12
10 x 10 x 14
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
16 x 16 x 21
18 x 18 x 16
18 x 18 x 21
435
670
905
1350
1666
1400
1756
435
435
670
850
850
905
1007
1350
1666
1400
1756
435
435
670
850
850
905
1007
1350
1666
1400
1756
420
420
640
820
820
905
1007
1350
1666
1400
1756
30
63
139
296
428
428
630
33
47
68
100
100
150
220
330
470
470
680
35
53
75
109
109
160
240
352
528
528
752
38
55
83
118
118
170
250
375
550
550
825
0.24
0.24
0.26
0.28
0.30
0.32
0.34
0.20
0.20
0.20
0.20
0.20
0.22
0.22
0.24
0.26
0.26
0.28
0.16
0.16
0.16
0.16
0.16
0.18
0.18
0.20
0.22
0.22
0.26
0.14
0.14
0.14
0.14
0.14
0.16
0.16
0.16
0.18
0.18
0.20
Z
100 kHz
20 °C
()
0.250
0.130
0.077
0.050
0.035
0.050
0.035
0.250
0.250
0.130
0.100
0.100
0.077
0.060
0.050
0.035
0.050
0.035
0.250
0.250
0.130
0.100
0.100
0.077
0.060
0.050
0.035
0.050
0.035
0.280
0.280
0.140
0.110
0.110
0.077
0.060
0.050
0.035
0.050
0.035
Z
100 kHz
- 40 °C
()
2.00
1.10
0.60
0.40
0.28
0.40
0.28
2.00
2.00
1.10
0.80
0.80
0.60
0.48
0.40
0.28
0.40
0.28
2.00
2.00
1.10
0.80
0.80
0.60
0.48
0.40
0.28
0.40
0.28
2.24
2.24
1.12
0.88
0.88
0.60
0.48
0.40
0.28
0.40
0.28
ORDERING
CODE (1)
MAL2150...
ORDERING
CODE (2)
MAL2150...
97311E3
97301E3
97312E3
97411E3
97412E3
97401E3
97402E3
97413E3
97414E3
97511E3
97512E3
97501E3
97502E3
97513E3
97514E3
97611E3
97612E3
97601E3
97602E3
97613E3
97614E3
-
99301E3
99312E3
99313E3
99314E3
99315E3
99316E3
99401E3
99403E3
99413E3
99414E3
99415E3
99416E3
99417E3
99418E3
99501E3
99503E3
99513E3
99514E3
99515E3
99516E3
99517E3
99518E3
99601E3
99603E3
99613E3
99614E3
99615E3
99616E3
99617E3
99618E3
Notes
(1) Standard reflow soldering profile, see Fig. 4 and Table 4
(2) Advanced reflow soldering profile, according to JEDEC J-STD-020, see Fig. 5 and Table 5
Revision: 17-Jun-11
7
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
35
50
63
100
CR
(μF)
NOMINAL CASE SIZE
LxWxH
(mm)
IR 105 °C
100 kHz
(mA)
IL
2 min
(μA)
tan 
100 Hz
100
220
330
330
470
680
1000
1500
1500
2200
68
100
220
220
330
680
1000
1000
1500
33
47
47
68
100
100
150
220
330
470
470
680
4.7
10
22
33
8 x 8 x 10
10 x 10 x 10
10 x 10 x 12
10 x 10 x 14
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
16 x 16 x 21
18 x 18 x 16
18 x 18 x 21
8 x 8 x 10
10 x 10 x 10
10 x 10 x 12
10 x 10 x 14
12.5 x 12.5 x 13
16 x 16 x 16
16 x 16 x 21
18 x 18 x 16
18 x 18 x 21
8 x 8 x 10
8 x 8 x 10
10 x 10 x 10
10 x 10 x 10
10 x 10 x 12
10 x 10 x 14
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
16 x 16 x 21
18 x 18 x 16
18 x 18 x 21
10 x 10 x 10
10 x 10 x 10
10 x 10 x 10
10 x 10 x 10
405
630
790
790
905
1007
1350
1666
1400
1756
333
490
620
620
690
1035
1100
1074
1470
270
270
390
390
507
507
507
637
910
987
944
1160
210
240
240
250
35
77
116
116
165
238
350
525
525
770
34
50
110
110
165
340
500
500
750
21
30
30
43
63
63
97
141
208
296
296
428
5
10
22
33
0.12
0.12
0.12
0.12
0.14
0.14
0.14
0.14
0.14
0.16
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.07
0.07
0.07
0.10
Z
100 kHz
20 °C
()
0.300
0.150
0.120
0.120
0.077
0.060
0.050
0.035
0.050
0.035
0.480
0.240
0.190
0.190
0.130
0.085
0.080
0.085
0.080
0.650
0.650
0.380
0.380
0.290
0.290
0.250
0.200
0.150
0.120
0.150
0.120
1.9
1.4
1.4
1.4
Z
100 kHz
- 40 °C
()
2.40
1.20
0.96
0.96
0.60
0.48
0.40
0.28
0.40
0.28
3.84
1.92
1.52
1.52
1.04
0.68
0.64
0.68
0.64
5.20
5.20
3.00
3.00
2.32
2.32
2.00
1.60
1.20
0.96
1.20
0.96
87
68
68
68
ORDERING
CODE (1)
MAL2150...
ORDERING
CODE (2)
MAL2150...
97011E3
97001E3
97002E3
97012E3
97013E3
97111E3
97101E3
97102E3
97112E3
97812E3
97811E3
97801E3
97802E3
97803E3
97821E3
97815E3
97901E3
97902E3
97903E3
97904E3
99001E3
99003E3
99012E3
99013E3
99014E3
99015E3
99016E3
99017E3
99101E3
99103E3
99112E3
99114E3
99115E3
99116E3
99117E3
99801E3
99802E3
99804E3
99821E3
99815E3
99816E3
99817E3
99818E3
99819E3
-
Notes
(1) Standard reflow soldering profile, see Fig. 4 and Table 4
(2) Advanced reflow soldering profile, according to JEDEC J-STD-020, see Fig. 5 and Table 5
Table 7
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Surge voltage for short periods
IEC 60384-18, subclause 4.14
Us  1.15 x UR
Reverse voltage for short periods
IEC 60384-18, subclause 4.16
Urev  1 V
After 2 min at UR
IL2  0.01 x CR x UR
Ø D = 8 mm
Typ. 6 nH
Voltage
Current
Leakage current
Inductance
Equivalent series inductance (ESL)
Ø D = 10 mm
Typ. 8 nH
Ø D  12.5 mm
Typ. 11 nH
Calculated from tan max. and CR (see Table 6)
ESR = tan /2fCR
Resistance
Equivalent series resistance (ESR) at 100 Hz
Revision: 17-Jun-11
8
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
CAPACITANCE
1.2
C/C0
1.2
C/C0
1.0
1
1.1
0.8
2
2, 3
1.0
0.6
0.4
Curve 1: 10 V
Curve 2: 63 V
Curve 3: 100 V
2
0.9
3
1
1
0.2
0.8
Curve 1: 10 V
Curve 2: 63 V, 100 V
0.0
- 60
- 40
- 20
0
20
40
60
80
101
100
T (°C)
102
103
104
f (Hz)
105
C0 = Typical capacitance at 20 °C, 100 Hz
C0 = Capacitance at 20 °C, 100 Hz
Fig. 6 - Typical multiplier of capacitance as a function
of temperature at 100 Hz
Fig. 7 - Typical multiplier of capacitance as a function
of frequency at 20 °C
EQUIVALENT SERIES RESISTANCE (ESR)
100
10
ESR/
ESR0
ESR/
ESR0
2
10
1
1
1
Curve 1: 6.3 V to 63 V
Curve 2: 100 V
0.1
- 60
- 40
- 20
0
20
40
60
0.1
80
100
T (°C)
10 1
ESR0 = Typical ESR at 20 °C, 100 Hz
10 2
10 3
10 4
f (Hz)
10 5
ESR0 = typical ESR at 20 °C, 100 Hz
Fig. 8 - Typical multiplier of ESR as a function
of temperature at 100 Hz
Fig. 9 - Typical multiplier ESR as a function
of frequency at 20 °C
DISSIPATION FACTOR (tan )
IMPEDANCE (Z)
100
100
tan/
tan0
Z/Z0
2
2
10
10
1
1
1
1
Curve 1: 6.3 V to 63 V
Curve 2: 100 V
Curve 1: 6.3 V to 63 V
Curve 2: 100 V
0.1
- 60
0.1
- 40
- 20
0
20
40
60
- 60
80
100
T (°C)
tan δ0 = Typical tan δ at 20 °C, 100 Hz
- 20
0
20
40
60
80
100
T (°C)
Z0 = Typical impedance Z at 20 °C, 100 kHz
Fig. 10 - Typical multiplier of dissipation factor tan  as a
function of temperature at 20 °C at 100 Hz
Revision: 17-Jun-11
- 40
Fig. 11 - Typical multiplier of impedance Z as a function of
temperature at 100 kHz
9
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
IMPEDANCE (Z)
1000
Z
(Ω)
100
Curve 1: 220-25-0810
Curve 2: 330-25-1010
Curve 3: 470-25-1014
Curve 4: 680-25-1213
Curve 5: 1000-25-1216
Curve 6: 1500-25-1616
Curve 7: 3300-25-1821
Z
(Ω)
10
Curve 1: 47-63-0810
Curve 2: 68-63-1010
Curve 3: 100-63-1014
Curve 4: 150-63-1213
Curve 5: 220-63-1216
Curve 6: 330-63-1616
Curve 7: 680-63-1821
100
10
1
1
2
3
4
5
6
7
0.1
1
2
3
4
5
6
7
1
0.1
0.01
0.01
101
102
103
104
f (Hz)
101
105
10 2
Fig. 12 - Typical impedance Z as a function
of frequency at 20 °C
10 3
10 4
f (Hz)
10 5
Fig. 13 - Typical impedance Z as a function
of frequency at 20 °C
10 000
Z
(Ω)
1000
100
1
2
3
4
10
Curve 1: 4,7-100-1010
Curve 2: 10-100-1010
Curve 3: 22-100-1010
Curve 4: 33-100-1010
1
0.1
101
102
103
104
f (Hz)
105
Fig. 14 - Typical impedance Z as a function
of frequency at 20 °C
RIPPLE CURRENT AND USEFUL LIFE
Table 8
ENDURANCE TEST DURATION AND USEFUL LIFE
NOMINAL
CASE SIZE
DxL
(mm)
MAL215097...
CASE
CODE
ENDURANCE
AT 105 °C
(h)
USEFUL LIFE
AT 105 °C
(h)
MAL215099...
USEFUL LIFE
AT 40 °C
1.8 x IR APPLIED
(h)
ENDURANCE
AT 105 °C
(h)
USEFUL LIFE
AT 105 °C
(h)
USEFUL LIFE
AT 40 °C
1.8 x IR APPLIED
(h)
8 x 8 x 10
0810
2000
2500
125 000
-
-
-
10 x 10 x 10
1010
2000
3000
150 000
2000
3000
150 000
10 x 10 x 12
1012
-
-
-
2000
3000
150 000
10 x 10 x 14
1014
2000
3000
150 000
-
-
-
12.5 x 12.5 x 13
1213
3000
5000
250 000
5000
6000
300 000
12.5 x 12.5 x 16
1216
3000
5000
250 000
6500
7500
375 000
16 x 16 x 16
1616
-
-
-
8000
10 000
500 000
16 x 16 x 21
1621
-
-
-
8000
10 000
500 000
18 x 18 x 16
1816
-
-
-
8000
10 000
500 000
18 x 18 x 21
1821
-
-
-
8000
10 000
500 000
Revision: 17-Jun-11
10
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
RIPPLE CURRENT AND USEFUL LIFE
MEA240
3.8
IA
3.7
IR
3.6
3.5
3.4
3.3
3.2
3.1
3.0
2.8
Lifetime multiplier
2.6
0
1.
2.4
5
1.
0
2.
2.2
0
3.
0
4.
2.0
0
6.
0
8.
1.8
12
1.6
20
60
(1)
0
10
0
15 0
20
1.2
1.0
0.8
0.5
0.0
IA = Actual ripple current at 100 kHz
IR = Rated ripple current at 100 kHz, 105 °C
(1)
= Useful life at 105 °C and IR applied: see Table 8
30
1.4
40
50
60
70
80
90
100
110
Tamb (°C)
Fig. 15 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 9
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
IR MULTIPLIER
FREQUENCY
(Hz)
UR = 6.3 V TO 25 V
UR = 35 V
UR = 50 V TO 100 V
100
0.70
0.65
0.60
300
0.80
0.80
0.75
1000
0.85
0.85
0.85
3000
0.93
0.93
0.93
10 000
0.95
0.95
0.95
30 000
0.97
0.97
0.97
100 000
1.00
1.00
1.00
Revision: 17-Jun-11
11
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
150 CRZ
www.vishay.com
Vishay BCcomponents
Table 10
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Mounting
Endurance
PROCEDURE
(quick reference)
REFERENCE
IEC 60384-18,
subclause 4.3
Shall be performed prior to tests mentioned below;
reflow soldering;
for maximum temperature load
refer to chapter “Mounting”
IEC 60384-18/CECC32300,
subclause 4.15
Tamb = 105 °C; UR applied;
for test duration see Table 8
REQUIREMENTS
C/C: ± 5 %
tan   spec. limit
IL2  spec. limit
UR = 6.3 V; C/C: ± 25 %
UR  10 V; C/C: ± 20 %
tan   2 x spec. limit
IL2  spec. limit
C/C: ± 30 %
tan   3 x spec. limit
Useful life
CECC 30301,
subclause 1.8.1
Tamb = 105 °C; UR and IR applied;
for test duration see Table 8
IL2  spec. limit
no short or open circuit
total failure percentage:  1 %
Shelf life
(storage at high
temperature)
Revision: 17-Jun-11
IEC 60384-18/
CECC32300,
subclause 4.17
Tamb = 105 °C; no voltage applied;
1000 h
after test: UR to be applied for 30 min,
24 h to 48 h before measurement
12
For requirements
see “Endurance test” above
Document Number: 28395
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1