150 CRZ www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z FEATURES • Extended useful life: up to 10 000 h at 105 °C for MAL215099...E3 parts • Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing • SMD-version with base plate, lead (Pb)-free reflow solderable • Very low impedance, very high ripple current • Charge and discharge proof, no peak current limitation 140 CRH 125 °C 146 CTI Lower Z • Parts for advanced high temperature reflow soldering according to JEDEC® J-STD-020 • Vibration proof, 4-pin version and 6-pin version High temp. • AEC-Q200 qualified 150 CRZ 153 CRV • High reliability Lower Z • Low ESR Fig. 1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range 6.3 V to 63 V: 80 V to 100 V: Endurance test at 105 °C Useful life at 105 °C Useful life at 40 °C; 1.8 x lR applied Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 6.3 V to 63 V: 80 V to 100 V: Revision: 26-Apr-16 VALUE 8 x 8 x 10 to 18 x 18 x 21 4.7 μF to 10 000 μF ± 20 % 6.3 V to 100 V -55 °C to +105 °C -40 °C to +105 °C 2000 h to 8000 h 2500 h to 10 000 h 125 000 h to 500 000 h 1000 h IEC 60384-18 / CECC 32300 55/105/56 40/105/56 APPLICATIONS • SMD technology, for high temperature reflow soldering • Industrial and professional applications • Automotive, general industrial, telecom • Smoothing, filtering, buffering MARKING • Rated capacitance (in μF) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Black mark or “-” sign indicating the cathode (the anode is identified by bevelled edges) • Code indicating group number (Z) PACKAGING Supplied in blister tape on reel Document Number: 28395 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) CR (μF) 6.3 10 16 25 UR (V) 35 50 63 80 100 4.7 10 x 10 x 10 10 10 x 10 x 10 22 10 x 10 x 10 8 x 8 x 10 HMAX. MAX 0.3 D WMAX. B B L1MAX.S HMAX. MAX 0.3 35V 1000u 3R-H WMAX. 25V 1000u A4-H 25V 220 u A4-H D 6-pin: ≥ Ø 16 mm LMAX. L1MAX. S min. 0.4/max. 1.0 (2 x) 4-pin: Ø 12.5 mm min. 0.4/max. 1.0 (2 x) 2-pin: ≤ Ø 10 mm min. 0.4/max. 1.0 (2 x) 8 x 8 x 10 10 x 10 x 10 8 x 8 x 10 10 x 10 x 12 47 10 x 10 x 10 10 x 10 x 10 10 x 10 x 10 12.5 x 12.5 x 13 68 10 x 10 x 12 12.5 x 12.5 x 13 100 8 x 8 x 10 10 x 10 x 10 10 x 10 x 12 10 x 10 x 14 8 x 8 x 10 12.5 x 12.5 x 1312.5 x 12.5 x 1312.5 x 12.5 x 16 150 10 x 10 x 12 16 x 16 x 16 220 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 12.5 x 12.5 x 1612.5 x 12.5 x 16 10 x 10 x 14 10 x 10 x 12 16 x 16 x 21 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 12.5 x 12.5 x 13 16 x 16 x 16 16 x 16 x 16 330 10 x 10 x 14 18 x 18 x 16 10 x 10 x 12 16 x 16 x 21 16 x 16 x 21 18 x 18 x 21 470 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 12.5 x 12.5 x 13 10 x 10 x 14 18 x 18 x 16 18 x 18 x 16 10 x 10 x 12 680 10 x 10 x 10 12.5 x 12.5 x 1312.5 x 12.5 x 16 16 x 16 x 16 18 x 18 x 21 18 x 18 x 21 10 x 10 x 14 10 x 10 x 12 16 x 16 x 21 1000 10 x 10 x 10 12.5 x 12.5 x 1312.5 x 12.5 x 16 16 x 16 x 16 10 x 10 x 14 18 x 18 x 16 16 x 16 x 21 18 x 18 x 21 12.5 x 12.5 x 1312.5 x 12.5 x 16 16 x 16 x 16 1500 18 x 18 x 16 16 x 16 x 21 18 x 18 x 21 2200 12.5 x 12.5 x 1312.5 x 12.5 x 16 16 x 16 x 16 18 x 18 x 16 16 x 16 x 21 18 x 18 x 21 16 x 16 x 16 3300 18 x 18 x 16 16 x 16 x 21 18 x 18 x 21 4700 16 x 16 x 16 18 x 18 x 16 16 x 16 x 21 18 x 18 x 21 6800 18 x 18 x 16 10 000 18 x 18 x 21 33 HMAX. MAX. 0.3 D WMAX. B LMAX. L1MAX. S LMAX. Fig. 2 - Dimensional outline Revision: 26-Apr-16 Document Number: 28395 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE LMAX. WMAX. HMAX. ØD BMAX. S L1MAX. MASS (g) 8 x 8 x 10 0810 8.5 8.5 10.5 8.0 1.0 2.2 10.2 1.0 10 x 10 x 10 1010 10.5 10.5 10.5 10.0 1.0 3.5 12.1 1.3 10 x 10 x 12 1012 10.5 10.5 12.5 10.0 1.0 3.5 12.1 1.5 10 x 10 x 14 1014 10.5 10.5 14.3 10.0 1.0 3.5 12.1 1.5 12.5 x 12.5 x 13 1213 12.9 12.9 14.0 12.5 1.3 3.6 14.9 2.6 12.5 x 12.5 x 16 1216 12.9 12.9 16.5 12.5 1.3 3.6 14.9 2.8 16 x 16 x 16 1616 16.6 16.6 17.5 16.0 1.3 6.5 18.6 5.5 16 x 16 x 21 1621 16.6 16.6 22.0 16.0 1.3 6.5 18.6 6.0 18 x 18 x 16 1816 19.0 19.0 17.5 18.0 1.3 6.5 21.0 8.0 18 x 18 x 21 1821 19.0 19.0 22.0 18.0 1.3 6.5 21.0 8.3 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 8 x 8 x 10 0810 16 24 11.6 380 500 10 x 10 x 10 1010 16 24 11.6 380 500 10 x 10 x 12 1012 16 24 12.8 330 250 10 x 10 x 14 1014 16 24 15.4 330 250 12.5 x 12.5 x 13 1213 20 24 16.2 380 250 12.5 x 12.5 x 16 1216 24 32 18.5 380 200 16 x 16 x 16 1616 28 44 18.9 380 150 16 x 16 x 21 1621 28 44 23.4 380 100 18 x 18 x 16 1816 32 44 18.9 380 125 18 x 18 x 21 1821 32 44 23.4 380 100 Note • Detailed tape dimensions see section “PACKAGING”. Revision: 26-Apr-16 Document Number: 28395 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and / or adjacent components. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. For maximum conditions refer to Fig. 4 or Fig. 5. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the specified maximum curves should never be exceeded. e a c a d b f b b d a c a a Case size Ø D ≤ 10 mm c a Case size Ø D ≥ 16 mm Case size Ø D = 12.5 mm Fig. 3 - Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c d e f 0810 4.4 2.5 3.0 - - - 1010 4.4 2.5 4.0 - - - 1012 4.4 2.5 4.0 - - - 1014 4.4 2.5 4.0 - - - 1213 6.3 2.5 4.0 4.2 5.0 5.6 1216 6.3 2.5 4.0 4.2 5.0 5.6 1616 7.8 9.6 4.7 - - - 1621 7.8 9.6 4.7 - - - 1816 8.8 9.6 4.7 - - - 1821 8.8 9.6 4.7 - - - Revision: 26-Apr-16 Document Number: 28395 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents STANDARD SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS T (°C) TPeak 230 217 t4 t3 200 150 t2 t1 time (s) Fig. 4 - Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS for MAL215097xxxE3 CASE CODE 0810 TO 1014 CASE CODE 1213 TO 1216 Max. time from 25 °C to Tpeak 240 s 200 s Max. ramp-up rate to 150 °C 3 K/s 3 K/s Max. time from 150 °C to 200 °C (t1) 150 s 120 s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s Max. time from 200 °C to 217 °C (t2) 60 s 60 s Max. time above TLiquidus (217 °C) (t3) 90 s 60 s Max. time above 230 °C (t4) 40 s 30 s 250 °C 240 °C Max. time above Tpeak minus 5 °C 5s 10 s Max. ramp-down rate from TLiquidus 3 K/s to 6 K/s 3 K/s to 6 K/s PROFILE FEATURES Ramp up rate from 200 °C to Tpeak Peak temperature Tpeak Notes • Temperature measuring point on top of the case and on terminals. • Max. 2 runs with pause of min. 30 min in between. Revision: 26-Apr-16 Document Number: 28395 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS ACCORDING TO JEDEC J-STD-020 T (°C) TPeak 230 217 t4 t3 200 190 t2 150 t1 25 time (s) Fig. 5 - Maximum temperature load during reflow soldering Table 5 REFLOW SOLDERING CONDITIONS for MAL215099xxxE3 CASE CODE 1010 TO 1012 CASE CODE 1213 TO 1216 CASE CODE 1616 TO 1821 Max. time from 25 °C to TPeak 300 s 300 s 300 s Max. ramp-up rate to 150 °C 3 K/s 3 K/s 3 K/s Max. time from 150 °C to 200 °C (t1) 150 s 150 s 150 s Max. time from 190 °C to 200 °C (t2) 110 s 110 s 110 s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s Max. time above TLiquidus (217 °C) (t3) 90 s 90 s 90 s Max. time above 230 °C (t4) 70 s 65 s 60 s 260 °C 250 °C 245 °C 40 s 30 s 30 s 3 K/s to 6 K/s 3 K/s to 6 K/s 3 K/s to 6 K/s PROFILE FEATURES Ramp up rate from 200 °C to TPeak Peak temperature TPeak Max. time above TPeak minus 5 °C Ramp-down rate from TLiquidus Notes • Temperature measuring point on top of the case and on terminals. • Max. 2 runs with pause of min. 30 min in between. Revision: 26-Apr-16 Document Number: 28395 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA Electrolytic capacitor 150 CRZ series SYMBOL DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 kHz, 105 °C IL2 Max. leakage current after 2 min at UR tan Z 470 μF / 35 V; ± 20 % Nominal case size: 12.5 mm x 12.5 mm x 13 mm; taped on reel Ordering code: MAL215099012E3 Max. dissipation factor at 100 Hz Max. impedance at 100 kHz Note • Unless otherwise specified, all electrical values in Table 6 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 6 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 105 °C 100 kHz (mA) IL 2 min (μA) tan 100 Hz 470 1000 2200 4700 6800 6800 10 000 330 470 680 1000 1000 1500 2200 3300 4700 4700 6800 220 330 470 680 680 1000 1500 2200 3300 3300 4700 150 220 330 470 470 680 1000 1500 2200 2200 3300 8 x 8 x 10 10 x 10 x 10 12.5 x 12.5 x 13 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 12 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 12 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 12 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 435 670 905 1350 1666 1400 1756 435 435 670 850 850 905 1007 1350 1666 1400 1756 435 435 670 850 850 905 1007 1350 1666 1400 1756 420 420 640 820 820 905 1007 1350 1666 1400 1756 30 63 139 296 428 428 630 33 47 68 100 100 150 220 330 470 470 680 35 53 75 109 109 160 240 352 528 528 752 38 55 83 118 118 170 250 375 550 550 825 0.24 0.24 0.26 0.28 0.30 0.32 0.34 0.20 0.20 0.20 0.20 0.20 0.22 0.22 0.24 0.26 0.26 0.28 0.16 0.16 0.16 0.16 0.16 0.18 0.18 0.20 0.22 0.22 0.26 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.16 0.18 0.18 0.20 Z 100 kHz 20 °C () 0.250 0.130 0.077 0.050 0.035 0.050 0.035 0.250 0.250 0.130 0.100 0.100 0.077 0.060 0.050 0.035 0.050 0.035 0.250 0.250 0.130 0.100 0.100 0.077 0.060 0.050 0.035 0.050 0.035 0.280 0.280 0.140 0.110 0.110 0.077 0.060 0.050 0.035 0.050 0.035 Z 100 kHz -40 °C () 2.00 1.10 0.60 0.40 0.28 0.40 0.28 2.00 2.00 1.10 0.80 0.80 0.60 0.48 0.40 0.28 0.40 0.28 2.00 2.00 1.10 0.80 0.80 0.60 0.48 0.40 0.28 0.40 0.28 2.24 2.24 1.12 0.88 0.88 0.60 0.48 0.40 0.28 0.40 0.28 ORDERING CODE (1) MAL2150... ORDERING CODE (2) MAL2150... 97311E3 97301E3 97312E3 97411E3 97412E3 97401E3 97402E3 97413E3 97414E3 97511E3 97512E3 97501E3 97502E3 97513E3 97514E3 97611E3 97612E3 97601E3 97602E3 97613E3 97614E3 - 99301E3 99312E3 99313E3 99314E3 99315E3 99316E3 99401E3 99403E3 99413E3 99414E3 99415E3 99416E3 99417E3 99418E3 99501E3 99503E3 99513E3 99514E3 99515E3 99516E3 99517E3 99518E3 99601E3 99603E3 99613E3 99614E3 99615E3 99616E3 99617E3 99618E3 Notes (1) Standard reflow soldering profile, see Fig. 4 and Table 4 (2) Advanced reflow soldering profile, according to JEDEC J-STD-020, see Fig. 5 and Table 5 Revision: 26-Apr-16 Document Number: 28395 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 35 50 63 80 100 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 105 °C 100 kHz (mA) IL 2 min (μA) tan 100 Hz 100 220 330 330 470 680 1000 1500 1500 2200 68 100 220 220 330 680 1000 1000 1500 33 47 47 68 100 100 150 220 330 470 470 680 47 100 150 220 330 470 470 680 4.7 10 22 33 47 68 100 150 220 330 330 470 8 x 8 x 10 10 x 10 x 10 10 x 10 x 12 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 8 x 8 x 10 10 x 10 x 10 10 x 10 x 12 10 x 10 x 14 12.5 x 12.5 x 13 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 10 10 x 10 x 12 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 10 x 10 x 10 10 x 10 x 12 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 10 x 10 x 10 10 x 10 x 10 10 x 10 x 10 10 x 10 x 10 10 x 10 x 12 12.5 x 12.5 x 13 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 405 630 790 790 905 1007 1350 1666 1400 1756 333 490 620 620 690 1035 1100 1074 1470 270 270 390 390 507 507 507 637 910 987 944 1160 240 300 670 750 1000 1400 1050 1450 210 240 240 250 270 660 660 750 1000 1400 1050 1450 35 77 116 116 165 238 350 525 525 770 34 50 110 110 165 340 500 500 750 21 30 30 43 63 63 97 141 208 296 296 428 38 80 120 176 264 376 376 544 5 10 22 33 47 68 100 150 220 330 330 470 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.14 0.16 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Z 100 kHz 20 °C () 0.300 0.150 0.120 0.120 0.077 0.060 0.050 0.035 0.050 0.035 0.480 0.240 0.190 0.190 0.130 0.085 0.080 0.085 0.080 0.650 0.650 0.380 0.380 0.290 0.290 0.250 0.200 0.150 0.120 0.150 0.120 0.800 0.620 0.350 0.250 0.180 0.120 0.160 0.110 0.800 0.800 0.800 0.800 0.620 0.350 0.350 0.250 0.180 0.120 0.160 0.110 Z 100 kHz -40 °C () 2.40 1.20 0.96 0.96 0.60 0.48 0.40 0.28 0.40 0.28 3.84 1.92 1.52 1.52 1.04 0.68 0.64 0.68 0.64 5.20 5.20 3.00 3.00 2.32 2.32 2.00 1.60 1.20 0.96 1.20 0.96 6.40 4.96 2.80 2.00 1.44 0.96 1.28 0.88 6.40 6.40 6.40 6.40 4.96 2.80 2.80 2.00 1.44 0.96 1.28 0.80 ORDERING CODE (1) MAL2150... ORDERING CODE (2) MAL2150... 97011E3 97001E3 97002E3 97012E3 97013E3 97111E3 97101E3 97102E3 97112E3 97812E3 97811E3 97801E3 97802E3 97803E3 97821E3 97815E3 97701E3 97901E3 97902E3 97903E3 97904E3 - 99001E3 99003E3 99012E3 99013E3 99014E3 99015E3 99016E3 99017E3 99101E3 99103E3 99112E3 99114E3 99115E3 99116E3 99117E3 99801E3 99802E3 99804E3 99821E3 99815E3 99816E3 99817E3 99818E3 99819E3 99701E3 99702E3 99703E3 99704E3 99705E3 99706E3 99707E3 99708E3 99902E3 99903E3 99904E3 99905E3 99906E3 99907E3 99908E3 99909E3 99911E3 99912E3 99913E3 Notes (1) Standard reflow soldering profile, see Fig. 4 and Table 4 (2) Advanced reflow soldering profile, according to JEDEC J-STD-020, see Fig. 5 and Table 5 Revision: 26-Apr-16 Document Number: 28395 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents Table 7 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Surge voltage for short periods IEC 60384-18, subclause 4.14 Us 1.1 x UR Reverse voltage for short periods IEC 60384-18, subclause 4.16 Urev 1 V After 2 min at UR IL2 0.01 x CR x UR Ø D = 8 mm Typ. 6 nH Voltage Current Leakage current Inductance Equivalent series inductance (ESL) Ø D = 10 mm Typ. 8 nH Ø D 12.5 mm Typ. 11 nH Calculated from tan max. and CR (see Table 6) ESR = tan /2fCR Resistance Equivalent series resistance (ESR) at 100 Hz CAPACITANCE 1.2 C/C0 1.2 C/C0 1 1.0 1.1 0.8 2 2, 3 1.0 0.6 Curve 1: 10 V Curve 2: 63 V Curve 3: 100 V 2 0.9 3 1 0.8 1 0.4 0.2 Curve 1: 10 V Curve 2: 63 V, 100 V 0.0 -60 -40 -20 0 20 40 60 80 101 100 T (°C) 102 103 104 f (Hz) 105 C0 = Typical capacitance at 20 °C, 100 Hz C0 = Capacitance at 20 °C, 100 Hz Fig. 6 - Typical multiplier of capacitance as a function of temperature at 100 Hz Fig. 7 - Typical multiplier of capacitance as a function of frequency at 20 °C EQUIVALENT SERIES RESISTANCE (ESR) 100 10 ESR/ ESR0 ESR/ ESR0 2 10 1 1 1 Curve 1: 6.3 V to 63 V Curve 2: 100 V 0.1 -60 -40 -20 0 20 40 60 80 100 T (°C) ESR0 = Typical ESR at 20 °C, 100 Hz Fig. 8 - Typical multiplier of ESR as a function of temperature at 100 Hz Revision: 26-Apr-16 0.1 10 1 10 2 10 3 10 4 f (Hz) 10 5 ESR0 = Typical ESR at 20 °C, 100 Hz Fig. 9 - Typical multiplier ESR as a function of frequency at 20 °C Document Number: 28395 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents DISSIPATION FACTOR (tan ) IMPEDANCE (Z) 100 100 Z/Z0 tan/ tan0 2 2 10 10 1 1 1 1 Curve 1: 6.3 V to 63 V Curve 2: 100 V Curve 1: 6.3 V to 63 V Curve 2: 100 V 0.1 0.1 -60 -40 -20 0 20 40 60 -60 80 100 T (°C) tan δ0 = Typical tan δ at 20 °C, 100 Hz -40 0 -20 20 40 60 80 100 T (°C) Z0 = Typical impedance Z at 20 °C, 100 kHz Fig. 10 - Typical multiplier of dissipation factor tan as a function of temperature at 20 °C at 100 Hz Fig. 11 - Typical multiplier of impedance Z as a function of temperature at 100 kHz IMPEDANCE (Z) 1000 Z (Ω) 100 Curve 1: 220-25-0810 Curve 2: 330-25-1010 Curve 3: 470-25-1014 Curve 4: 680-25-1213 Curve 5: 1000-25-1216 Curve 6: 1500-25-1616 Curve 7: 3300-25-1821 Z (Ω) 10 Curve 1: 47-63-0810 Curve 2: 68-63-1010 Curve 3: 100-63-1014 Curve 4: 150-63-1213 Curve 5: 220-63-1216 Curve 6: 330-63-1616 Curve 7: 680-63-1821 100 10 1 1 2 3 4 5 6 7 0.1 1 2 3 4 5 6 7 1 0.1 0.01 0.01 101 102 103 104 f (Hz) 101 105 Fig. 12 - Typical impedance Z as a function of frequency at 20 °C 10 2 10 3 10 4 f (Hz) 10 5 Fig. 13 - Typical impedance Z as a function of frequency at 20 °C 10 000 Z (Ω) 1000 100 1 2 3 4 10 Curve 1: 4,7-100-1010 Curve 2: 10-100-1010 Curve 3: 22-100-1010 Curve 4: 33-100-1010 1 0.1 101 102 103 104 f (Hz) 105 Fig. 14 - Typical impedance Z as a function of frequency at 20 °C Revision: 26-Apr-16 Document Number: 28395 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 8 ENDURANCE TEST DURATION AND USEFUL LIFE MAL215097... NOMINAL CASE SIZE DxL (mm) CASE ENDURANCE USEFUL LIFE CODE AT 105 °C AT 105 °C (h) (h) MAL215099... UR = 6.3 V TO 63 V MAL215099... UR = 80 V TO 100 V USEFUL LIFE USEFUL ENDURANCE AT 40 °C LIFE AT 105 °C 1.8 x IR AT 105 °C (h) (h) APPLIED (h) USEFUL USEFUL LIFE ENDURANCE LIFE AT 40 °C AT 105 °C AT 105 °C 1.8 x IR (h) (h) APPLIED (h) USEFUL LIFE AT 40 °C 1.8 x IR APPLIED (h) 8 x 8 x 10 0810 2000 2500 125 000 - - - - - - 10 x 10 x 10 1010 2000 3000 150 000 2000 3000 150 000 2000 3000 150 000 10 x 10 x 12 1012 - - - 2000 3000 150 000 2000 3000 150 000 10 x 10 x 14 1014 2000 3000 150 000 - - - - - - 12.5 x 12.5 x 13 1213 3000 5000 250 000 5000 6000 300 000 3000 5000 250 000 12.5 x 12.5 x 16 1216 3000 5000 250 000 6500 7500 375 000 3000 5000 250 000 16 x 16 x 16 1616 - - - 8000 10 000 500 000 3000 5000 250 000 16 x 16 x 21 1621 - - - 8000 10 000 500 000 3000 5000 250 000 18 x 18 x 16 1816 - - - 8000 10 000 500 000 3000 5000 250 000 18 x 18 x 21 1821 - - - 8000 10 000 500 000 3000 5000 250 000 RIPPLE CURRENT AND USEFUL LIFE CCC206 3.8 IA 3.7 IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 1.0 2.4 1.5 2.0 2.2 3.0 4.0 2.0 6.0 8.0 2 1 1.8 1.6 20 30 60 0 10 0 15 0 20 IA = actual ripple current at 100 kHz IR = rated ripple current at 100 kHz, 105 °C (1) Useful life at 105 °C and IR applied: see Table 8 1.4 1.2 1.0 0.8 0.5 0.0 40 50 (1) 60 70 80 90 100 110 Tamb (°C) Fig. 15 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 26-Apr-16 Document Number: 28395 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 CRZ www.vishay.com Vishay BCcomponents Table 9 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 V TO 25 V UR = 35 V UR = 50 V TO 100 V 100 0.70 0.65 0.60 300 0.80 0.80 0.75 1000 0.85 0.85 0.85 3000 0.93 0.93 0.93 10 000 0.95 0.95 0.95 30 000 0.97 0.97 0.97 100 000 1.00 1.00 1.00 Table 10 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Mounting Endurance REFERENCE PROCEDURE (quick reference) IEC 60 384-18, subclause 4.3 Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” IEC 60 384-18/CECC32 300, subclause 4.15 Tamb = 105 °C; UR applied; for test duration see Table 8 REQUIREMENTS C/C: ± 5 % tan spec. limit IL2 spec. limit UR = 6.3 V; C/C: ± 25 % UR 10 V; C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit C/C: ± 30 % tan 3 x spec. limit Useful life CECC 30 301, subclause 1.8.1 Tamb = 105 °C; UR and IR applied; for test duration see Table 8 IL2 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) Revision: 26-Apr-16 IEC 60 384-18/ CECC32 300, subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement For requirements see “Endurance test” above Document Number: 28395 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000