Rev A FEATURES DTIPU130 Series Up to 130 Watts Single and Dual Outputs AC/DC Desktop Power Supply APPLICATIONS ● Cooling Fan ● Scanners ● 100% Burn-in ● LCD Monitors ● Class I Insulation ● Thermal Printers ● IEC-320-C14 Input Inlet ● Humidity Temperature Meters ● Long Hold-Up Times (50ms) ● Power Factor Correction (PFC) ● Option: Mounting Tab and Desk Top ● Optional Output Connectors Available ● Over Voltage Protection (Crowbar Design) ● -20°C ~ 70°C Operating Temperature Range ● Input Surge Current, Over Voltage, and Over Load Protection DESCRITION The DTIPU130 series of AC/DC desktop switching mode power supplies provide up to 130 watts of continuous output power. This series has single and dual output models available. Some features include wide input voltage range, cooling fan, and -20°C~+70°C operating temperature range. All models are protected against input surge current, over voltage, and over load conditions. All supplies are also UL 94V-1 compliant and include IEC320-C14 input connector for worldwide applications. All models meet FCC-Part-15 class B and CISPR-22 class B emission limits and are designed to comply with UL/c-UL (UL 60950-1), ITS/GS (EN 60950-1), and new CE requirements. These supplies are 100% burn-in tested. SPECIFICATIONS: DTIPU130 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT (Vin) Operating Voltage Range Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current Start-Up Time OUTPUT (Vo) Output Voltage Range Load Regulation Line Regulation Output Power Output Current Range *Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage For Primary to Ground Isolation Resistance Power Factor Correction ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity Cooling (See Note 4) MTBF PHYSICAL Weight TEST CONDITIONS Min Max Unit 1.7 0.7 15 30 0.5 1 260 63 3.2 1.7 30 60 0.75 2 VAC Hz A A A A mA s 90 47 Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 100VAC All Outputs 0.3 See Rating Chart 3 10 0.5 1 0 130 See Rating Chart 0.5 1 4 50 -0.04 +0.04 112 110 Io = Full Load, Vin = 230VAC 80 VDC % % W A % ms ms %/°C 132 150 % % 85 % Primary to Secondary 4242 VDC Primary to Ground 2121 VDC Test Voltage = 500VDC Io = Full Load, Vin = 90~260VAC 50 0.95 Derates linearly from 100% Load at 25°C to 50% load at 70°C -20 -40 5 Cooling fan will turn on when the internal temperature reaches +70°C Operating Temperature at 25°C, Calculated per MIL-HDBK-217F MΩ 1 +70 +85 95 Cooling fan 100,000 hours °C °C % Approximately 750 ~ 916 grams 7.72 x 3.46 x 2.01 inches 196.0 x 88.0 x 51.0 mm Dimensions (L x W x H) SAFETY EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 Nom Vin = 220VAC Vin = 110VAC *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 B B Class Class DTIPU130 Series Up to 130 Watts Single and Dual Outputs AC/DC Desktop Power Supply Rev A MODEL SELECTION TABLES SINGLE OUTPUT MODELS Model Number *DTIPU130-101 Preset Voltage Output Voltage Range Output Current Total Regulation Output Power 5 VDC 3 ~ 5 VDC 30.00 ~ 18.00A 7% 90W *DTIPU130-102 6 VDC 5 ~ 6 VDC 23.00 ~ 19.16A 7% 115W *DTIPU130-103 8 VDC 6 ~ 8 VDC 21.60 ~ 16.25A 7% 130W *DTIPU130-104 *DTIPU130-105 11 VDC 8 ~ 11 VDC 16.25 ~ 11.80A 5% 130W 13 VDC 11 ~ 13 VDC 11.80 ~ 10.00A 5% 130W *DTIPU130-106 16 VDC 13 ~ 16 VDC 10.00 ~ 8.12A 5% 130W *DTIPU130-107 21 VDC 16 ~ 21 VDC 8.12 ~ 6.19A 5% 130W *DTIPU130-108 27 VDC 21 ~ 27 VDC 6.19 ~ 4.81A 5% 130W *DTIPU130-109 33 VDC 27 ~ 33 VDC 4.81 ~ 3.93A 5% 130W DTIPU130-110 DTIPU130-111 40 VDC 33 ~ 40 VDC 3.93 ~ 3.25A 3% 130W 50 VDC 40 ~ 50 VDC 3.25 ~ 2.60A 3% 130W DTIPU130-112 55 VDC 50 ~ 55 VDC 3.25 ~ 2.36A 3% 130W Total Regulation Output Power DUAL OUTPUT MODELS Model Number *DTIPU130-200 *DTIPU130-201 *DTIPU130-201-1 *DTIPU130-202 *DTIPU130-203 Output Voltage Output Current Min. Max. Output 1 +3.3 VDC 4A 20A 7% Output 2 +12.0 VDC 0A 2A 5% Output 1 +5.0 VDC 4A 20A 7% Output 2 +12.0 VDC 0A 2A 5% Output 1 +5.0 VDC 2A 10A 5% Output 2 +12.0 VDC 1A 5A 10% Output 1 +5.0 VDC 4A 20A 7% Output 2 +15.0 VDC 0A 2A 5% Output 1 +5.0 VDC 4A 20A 7% Output 2 +24.0 VDC 0.2A 2A 5% NOTES 1. For single output models the output voltage is specified as a range (Ex: 50 ~ 55VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 2. The “ * ” symbol means PSE approval. 3. Models with output voltages under 15VDC have been approved by TUV/PSE. Models with output voltages from 15 ~ 30VDC have been approved by JET/PSE. 4. The cooling fan will turn on when the internal temperature of the unit reaches +70°C. 5. Optional output connectors are available. Please call factory for ordering details. 6. Option: Mounting Tab and Desk Top. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 90W 120W 110W 120W 120W Rev A MECHANICAL DRAWING Unit: inches [mm] Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTIPU130 Series Up to 130 Watts Single and Dual Outputs AC/DC Desktop Power Supply