DATASHEET Rev. B DTIPU40 SERIES 90~264VAC Input Voltage Range Class I, Single Outputs Up to 40 Watts Output Power -20°C to +70°C Operating Temperature Range AC/DC Desktop Switching Power Supplies FEATURES Class I Splash Proof RoHS Compliant UL 94V-1 Compliant CEC and Energy Star Compliance Approved as Limited Power Source (LPS) IEC-320-C14 AC Inlet Connector 100% Burn-in Tested Single Output Voltages Available from 5 to 50VDC Wide Input Voltage Range: 90~264VAC Over Current Protection Over Voltage Protection (Crowbar Design) -20°C to +70°C Operating Temperature Range Meets FCC Part-15 Class B and CISPR-22 Class B Emission Limits UL/cUL (UL60950-1: 2nd Edition) and TUV/GS (EN 60950-1: 2nd Edition) Safety Approvals Optional Output Connectors Available DESCRIPTION The DTIPU40 series of class I AC/DC desktop switching power supplies provides up to 40 Watts of continuous output power in a 4.65” x 2.05” x 1.36” package. This series consists of single output models with a 90~264VAC input voltage range and an IEC-320-C14 AC inlet connector. These power supplies have an industrial operating temperature range of -20°C to +70°C and are protected against over voltage and over current conditions. All units are UL 94V-1, RoHS, CEC and Energy Star compliant and meet FCC Part-15 class B and CISPR-22 class B emission limits. The DTIPU40 series also meets new CE requirements and has UL/cUL (UL 60950-1: 2nd edition) and TUV/GS (EN 60950-1: 2nd edition) safety approvals. All units are 100% burn-in tested. 06/26/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 Rev. B DTIPU40 Series Up to 40 Watts Class I, Single Outputs AC/DC Desktop Power Supplies SPECIFICATIONS: DTIPU40 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS Operating Input Voltage Range Safety Approvals Input Voltage Range Operating Voltage Range Input Frequency Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC DTIPU40-102~104 models No Load, Vin = 230VAC DTIPU40-105~111 models Input Current Inrush Current No Load Power Consumption OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Range Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time Start-Up Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency Io = Full Load Vin = 230VAC Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC Io = Full Load, Vin = 100VAC Dielectric Withstanding Voltage Isolation Resistance Safety Ground Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity MTBF PHYSICAL SPECIFICATIONS Weight Io = Full Load, Vin = 230VAC Primary to Secondary Primary to Ground Test Voltage = 500VDC Io = Full Load, Vin = 240VAC Derating linearly from 100% Load at 40°C to 50% load at 70°C Operating Temp. at 25°C; calculated per MIL-HDBK-217F CEC & Energy Star Compliance 06/26/2012 20 42 264 240 63 1 0.5 25 50 0.5 0.3 VAC Hz A A W See Table 0.5 1 3 7 40 See Table 0.5 1 4 0 % % W 12 0.3 -0.04 0.5 +0.04 % ms ms s %/°C 112 110 132 150 % % See Table 4242 2121 50 VDC 0.5 -20 -40 0 0 0.75 MΩ mA 40 70 85 95 95 100,000 hours °C °C % % approx. 9.7oz (275g) 4.65 x 2.05 x 1.36 inches (118.0 x 52.0 x 34.5 mm) IEC-320-C14 Dimensions (L x W x H) AC Inlet Connector SAFETY & COMPLIANCE Safety Approvals EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 Compliance 90 100 47 UL/cUL (UL60950-1: 2nd edition.), TUV/GS (EN60950-1: 2nd edition), CE Vin = 220VAC B Class Vin = 120VAC B Class RoHS and UL 94V-1 DTIPU40-102~104 models CEC Level IV DTIPU40-105~111 models CEC Level V Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 DTIPU40 Series Up to 40 Watts Class I, Single Outputs AC/DC Desktop Power Supplies Rev. B MODEL SELECTION TABLE Input Voltage Range Output Voltage (1) Output Current Total Regulation (4) Efficiency Maximum Output Power DTIPU40-102 90 ~ 264 VAC 5 ~ 6 VDC 5.00 ~ 4.16 A 5% 79% 25W DTIPU40-103 90 ~ 264 VAC 7 ~ 8 VDC 4.28 ~ 3.75 A 5% 81% 30W DTIPU40-104 90 ~ 264 VAC 8 ~ 11 VDC 4.37 ~ 3.18 A 5% 82% 35W DTIPU40-105 90 ~ 264 VAC 11 ~ 13 VDC 3.63 ~ 3.07 A 5% 85% 40W DTIPU40-106 90 ~ 264 VAC 13 ~ 16 VDC 3.07 ~ 2.50 A 4% 85% 40W DTIPU40-107 90 ~ 264 VAC 16 ~ 21 VDC 2.50 ~ 1.90 A 4% 85% 40W DTIPU40-108 90 ~ 264 VAC 21 ~ 27 VDC 1.90 ~ 1.48 A 3% 85% 40W DTIPU40-109 90 ~ 264 VAC 27 ~ 33 VDC 1.48 ~ 1.21 A 3% 85% 40W DTIPU40-110 90 ~ 264 VAC 33 ~ 40 VDC 1.21 ~ 1.00 A 3% 85% 40W DTIPU40-111 90 ~ 264 VAC 40 ~ 50 VDC 1.00 ~ 0.80 A 3% 85% 40W Model Number NOTES 1. The output voltage is specified as a range (ex: 40~50VDC); the customer must specify what they would like the output voltage set at. 2. Models with an output voltage less than 30VDC have been approved by TUV/PSE. 3. Models DTIPU40-102~104 have been approved by CEC Level IV Models DTIPU40-105~111 have been approved by CEC Level V 4. Models DTIPU40-102~105 need to use AWG#16/4FT output cable in order to meet the total regulation specified. Models DTIPU40-106~111 need to use AWG#18/4FT output cable in order to meet the total regulation specified. The regulation and efficiency will change if a different output cable is used. 5. Optional output connectors available. Please call factory for ordering details. DERATING CURVE Output Power (%) 120 100 80 60 40 20 0 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) 06/26/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 4 DTIPU40 Series Up to 40 Watts Class I, Single Outputs AC/DC Desktop Power Supplies Rev. B MECHANICAL DRAWING Unit: inches (mm) 1.36±0.04 (34.5±1.0) 0.02 (0.5) 0.04 (1.0) 4.65±0.04 (118.0±1.0) SWITCHING POWER 2.05±0.04 (52.0±1.0) IEC-320-C14 Dimensions are for reference only COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 06/26/2012 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4