Reed Sensors Firecracker > 59065 59065 5/16” Plastic Threaded Barrel Sensor + 57065 Actuator Description The 59065 is a small plastic barrel sensor with a 5/16” x 24 thread, 38.1mm (1.500”) long with a choice of normally open, normally open high voltage, normally closed or change over contacts. It is capable of switching up to 265Vac/300Vdc at 10VA. It functions best with the 57065 actuator. Note: The 57065 Actuator is sold separately. Features • Two-part magnetically operated proximity sensor • Threaded barrel with retaining nuts • Available as M8 (57070/59070) or 5/16 (57065/59065) size options Agency Approvals Agency • Customer defined sensitivity option • Choice of cable length and connector Agency File Number Benefits E61760 • Simple installation and adjustment using supplied retaining nuts • Operates through non-ferrous materials such as wood, plastic or aluminium Note: Contact Littelfuse for specific agency approval ratings. Dimensions • Excellent for switching microcontroller logic level loads • No standby power requirement Dimensions in mm (inch) Applications M8 x 1.25 (57070) 5/16 x 24THD (57065) 31.75 (1.250) 38.10 (1.500) • Position and Limit Sensing • Security System Switch • Industrial Process Control • Linear Actuators 5.56 (.219) M8 x 1.25 (59070) 5/16 x 24 THD (59065) 31.75 (1.250) 38.10 (1.500) 6.35 NOM. (.250) 300±10.00 (11.81±.394) Different cable options available. © 2015 Littelfuse Revised: 10/29/15 Specifications are subject to change without notice. 5.56 (.219) littelfuse.com Reed Sensors Firecracker > 59065 59065 5/16” Plastic Threaded Barrel Sensor + 57065 Actuator Electrical Ratings Contact Type Normally Open Switch Type Normally Open HighVoltage Change Over Normally Closed 1 2 3 4 VA/Watt - max. 10 10 5 5 Vdc - max. Vac - max. Vdc - min. 200 140 250 300 265 400 175 120 200 175 120 200 Carry Adc - max. Aac - max. Adc - max. 0.5 0.35 1.2 0.4 0.30 1.4 0.25 0.18 1.5 0.25 0.18 1.5 Contact, Initial Insulation Ω - max. Ω - min. 0.2 1010 0.2 1010 0.2 109 0.2 109 Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3 Temperature Operating °C -40 to +105 -20 to +105 -40 to +105 -40 to +105 Contact Rating Voltage 4 Current 4 1 Switching 2 Breakdown Switching Resistance 5 3 2 Product Characteristics Operate Time 6 ms - max. 1.0 1.0 3.0 3.0 Release Time 6 ms - max. 1.0 1.0 3.0 3.0 11ms 1⁄2 sine G - max. 100 100 50 50 50-2000 Hz G - max. 30 30 30 30 Shock 7 Vibration 7 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse. Sensitivity Options (Using 57065 Actuator) Select Option S T U Distance Pull-In AT Activate Distance Pull-In AT Activate mm (inch) mm (inch) Range Range Average Average Switch Type Pull-In AT Range Activate Distance mm (inch) Average Pull-In AT Range Activate Distance mm (inch) Average 1 Normally Open 12-18 8.4 (.330) 17-23 6.6 (.260) 22-28 5.1 (.200) 27-33 4.0 (.157) 2 High Voltage -- -- 17-23 6.6 (.260) 22-28 5.1 (.200) 27-33 4.0 (.157) 3 Change Over 15-20 6.5 (.255) 20-25 4.9 (.193) 25-30 3.7 (.146) -- -- 4 Normally Closed 15-20 6.5 (.255) 20-25 4.9 (.193) 25-30 3.7 (.146) -- -- Note: 1. Pull-In AT Range: These AT values are the bare reed switch AT before modification. 2. The activation distance is average value on the final sensor assembly. Schematics Switch Type Black Sensor Actuator Black Black Blue White Black D © 2015 Littelfuse Revised: 10/29/15 Specifications are subject to change without notice. Black 1 and 2 3 4 littelfuse.com Reed Sensors Firecracker > 59065 59065 5/16” Plastic Threaded Barrel Sensor + 57065 Actuator Cable Length Specification Part Numbering System Sensor: Cable Type: 24 AWG 7/32 PVC 105°C UL1430/UL1569 Select Option Cable Length mm (inch) 02 300 (11.81) Series Switch Type 1, 2, 3, or 4 Termination Specification Sensitivity S, T, U, or V Termination Options Select Option 59065 - X - X - XX - X Description (Two-wire versions illustrated) A Tinned leads (6.4±0.76)mm F Untinned leads (6.4±0.76)mm E JST type XHP 2.5mm pitch Cable Length 02 Termination A, F, or E Actuator: 57065 - 000 Series Standard Actuator 000 Note: The 57065 Actuator is sold separately. Packaging Packaging Option Packaging Specification Bulk © 2015 Littelfuse Revised: 10/29/15 Specifications are subject to change without notice. Bulk Quantity 500 Quantity & Packaging Code N/A Taping Width N/A littelfuse.com