Power Film Capacitors PRODUCTS Electronic Components C4E Rectangular Brick Type DC Link Series Why Choose KEMET Applications KEMET Electronics Corporation is a leading global supplier of electronic components. We offer our customers the broadest selection of capacitor technologies in the industry, along with an expanding range of electromechanical devices, electromagnetic compatibility solutions and supercapacitors. Our vision is to be the preferred supplier of electronic component solutions for customers demanding the highest standards of quality, delivery and service. DC Link capacitors for the following applications: • Energy conversion • AC motor drives • Hybrid/electric vehicles • Inverter modules • Radar filtering (28 V/microwave burst) Features & Benefits • Metallized self-healing polypropylene • Soft end-of-life by capacitance decrease • Capable of withstanding transients up to 675 V • Plastic case filled with resin for long-term humidity protection • Meets IEC 61071:2007 & VDE 0560 Part 120/121 Standards Product Checklist • What is the ambient temperature profile? • What is the requirement for the expected lifetime? • Is there cooling? What kind? • What is the nominal and maximum DC voltage? • What is the ripple current and frequency? • Is the ripple current steady-state or intermittent? KEMET Part Number C4EEGMX6500AAUK Electrical Characteristics Rated capacitance 500 µF (±10)% Rated DC voltage 450 VDC Peak voltage 675 VDC Nominal RMS current (at Tamb = max. 80°C) 85 Arms Maximum RMS current (at Tamb = max. 70°C) 120 Arms Maximum peak current 2500 Apk Equivalent series resistance at 1 KHz < 1 mΩ Equivalent series inductance 15 nH Maximum pulse rise time 5 V/µs Thermal Characteristics Minimum operating temperature -40°C Maximum operating temperature +110°C Storage temperature -40°C to +85°C Maximum altitude without derating 2,200 m Test Methods & Performances Voltage test between terminals at 25°C 675 V/10 seconds Voltage test terminals to case at 50Hz 2,500 V/1 minute Life Expectancy Life expectancy at Un 15,000 hours (Hotspot max. temperature 90°C) Reliability 300 FIT Construction Dielectric Metallized polypropylene, self-healing Winding Non-inductive Filling Resin Case construction Metallic for prototype, plastic for mass production Dimensions For more information, samples and engineering kits, please visit us at www.kemet.com or call 1.877.myKEMET. SA0616 Width 72 (±1) mm Height 50 (±1) mm Length 237 (±1) mm Approximate weight 1.2 Kg Mounting & Terminations As per drawing (on Page 2) Copyright © 2016 KEMET Power Film Capacitors PRODUCTS SA0616 Electronic Components C4E Rectangular Brick Type DC Link Series Copyright © 2016 KEMET