Taping, Special Kinking, Packaging and Labeling Vishay 1. TAPING INFORMATION REMARK VALID FOR ALL TAPED FILM CAPACITORS, AXIAL AND RADIAL, AMMO AND REEL: For all taped film capacitors a maximum of 3 slices per 1000 pieces are permitted 1.1. RADIAL POTTED FILM CAPACITORS (dimensions in mm) 1.1.1. RADIAL POTTED STRAIGHT LEADS PITCH = 5.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H) 6.35 ± 0.20 (12.7) 1 max. 1 max. 1 max. + 0.5 5.0 - 0.1 0.5 ± 0.5 1 max. 32 max. 18.5 ± 0.5 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 A 0.7 ± 0.2 (3.85) Ø 4.0 ± 0.2 12.7 ± 0.2 detail A direction of unreeling PITCH = 5.08 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H) 6.35 ± 0.20 (12.7) 1 max. 1 max. 1 max. + 0.50 5.08 - 0.10 0.5 ± 0.5 1 max. 32 max. 18.5 ± 0.5 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 A 0.7 ± 0.2 (3.81) Ø 4.0 ± 0.2 detail A 12.7 ± 0.5 direction of unreeling www.vishay.com 396 For technical questions, contact: [email protected] Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay PITCH = 7.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H) 12.7 ± 0.2 0.5 ± 0.5 (12.7) 1 max. 1 max. 1 max. + 0.5 7.5 - 0.1 1 max. 32 max. 18.5 ± 0.5 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 A (8.95) Ø 4.0 ± 0.2 0.7 ± 0.2 direction of unreeling 12.7 ± 0.2 detail A PITCH = 7.62 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H) 12.7 ± 0.2 0.5 ± 0.5 (12.7) 1 max. 1 max. 1 max. 7.62 ± 0.30 1 max. 32 max. 18.5 ± 0.5 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 A (8.89) Ø 4.0 ± 0.2 direction of unreeling 0.7 ± 0.2 12.7 ± 0.2 detail A Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] www.vishay.com 397 Taping, Special Kinking, Packaging and Labeling Vishay PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 18.5 mm (H) 1 max. 1 max. (15 ± 0.2 ) 1 max. (15) 1 max. F = 7.5 + 0.5 - 0.1 32 max. 0.5 ± 0.5 18.5 ± 0.5 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 (3.75) Ø 4.0 ± 0.2 15 ± 0.2 direction of unreeling 0.7 ± 0.2 PITCH = 7.62 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 18.5 mm (H) 1 max. 1 max. 1 max. 1 max. + 0.5 F = 7.62 - 0.1 (15 ± 0.2 ) (15) 32 max. 0.5 ± 0.5 18.5 ± 0.5 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 (3.69) 15 ± 0.2 Ø 4.0 ± 0.2 direction of unreeling www.vishay.com 398 For technical questions, contact: [email protected] 0.7 ± 0.2 Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay PITCH = 10.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H) 12.7 ± 0.4 0.50 + 1.5 - 0.0 (25.4) 1.3 max. 1.3 max. 2 max. 10.0 + 0.5 - 0.1 2 max. 32 max. 18.5 ± 0.5 11 max. 9.5 ± 0.5 18.0 ± 0.5 12.0 ± 0.1 A Ø 4.0 ± 0.2 (7.7) direction of unreeling 0.7 ± 0.2 12.7 ± 0.2 detail A PITCH = 10.0 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 18.5 mm (H) 15.0 ± 0.4 1.0 max. 1.0 max. 1.0 max. 10.0+ 0.5 - 0.1 0.5 ± 0.5 1.0 max. 32 max. 18.5 ± 0.5 11 max. 9.0 ± 0.5 18.0 ± 0.5 12.0 ± 0.1 A (5) 15.0 ± 0.2 Ø 4.0 ± 0.2 0.7 ± 0.2 detail A Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] www.vishay.com 399 Taping, Special Kinking, Packaging and Labeling Vishay PITCH = 15.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H); ONE TAPE 1.3 max. 1.3 max. 2 max. 2 max. (25.4) 12.7 ± 0.4 35 max. 0.5 + 1.5 - 0.0 15.0+ 0.5 - 0.1 18.5 ± 0.5 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 4.0 ± 0.2 (5.2) 12.7 ± 0.2 0.7 ± 0.2 A direction of unreeling detail A PITCH = 15.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H); TWO TAPES (25.4) 1.3 max. 2 max. 1.3 max. 2 max. 12.7 ± 0.4 35 max. + 1.5 0.5 - 0.0 6.0 ± 0.1 + 0.5 15.0 - 0.1 18.5 ± 0.5 11 max. 9.0 ± 0.5 18.0 ± 0.5 6.0 ± 0.1 Ø 4.0 ± 0.2 (5.2) 0.7 ± 0.2 12.7 ± 0.2 A direction of unreeling detail A www.vishay.com 400 For technical questions, contact: [email protected] Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay PITCH = 22.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H); ONE TAPE (38.1) 19.05 ± 1.00 1.3 max. 2 max. 1.3 max. 2 max. + 1.5 22.5 - 0.0 40 max. + 1.5 0.5 - 0.0 + 1.5 22.5 - 0.1 18.5 ± 0.5 9.0 ± 0.5 12.0 ± 0.1 11 max. A 18.0 ± 0.5 4.0 ± 0.2 (7.8) 12.7 ± 0.2 0.7 ± 0.2 direction of unreeling detail A PITCH = 22.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H); TWO TAPES (38.1) 19.05 ± 0.40 1.3 max. 0.5 + 1.5 - 0.0 6.0 ± 0.1 2 max. 1.3 max. 40 max. + 0.5 22.5 - 0.1 9.0 ± 0.5 18.5 ± 0.5 11 max. 18.0 ± 0.5 A 6.0 ± 0.1 7.8 12.7 ± 0.2 Document Number: 28139 Revision: 03-Aug-10 2 max. Ø 4.0 ± 0.2 direction of unreeling For technical questions, contact: [email protected] 0.7 ± 0.2 detail A www.vishay.com 401 Taping, Special Kinking, Packaging and Labeling Vishay PACKAGING INFORMATION: VISHAY ROEDERSTEIN ONLY PITCH = 27.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.5 mm (H); ONE TAPE 24.5 ± 1.0 (50.8) 1.3 max. 0.5 + 1.5 - 0.0 1.3 max. 2 max. 2 max. 40 max. + 0.5 27.5 - 0.1 18.5 ± 0.5 9.0 ± 0.5 12.0 ± 0.1 A 18.0 ± 0.5 Ø 4.0 ± 0.2 12.7 ± 0.2 www.vishay.com 402 0.7 ± 0.2 (5.3) direction of unreeling For technical questions, contact: [email protected] detail A Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay 1.1.2. RADIAL POTTED KINKED LEADS PITCH = 5.08 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H) (12.7) 6.35 ± 0.20 1.0 max. 1.0 max. 1.0 max. 1.0 max. 1.7 ± 0.4 35° ± 25° 0.5 ± 0.1 18.0 ± 0.1 32 max. + 0.40 5.08 - 0.20 20 ± 0.5 16 ± 0.5 (*) 11 max. 9.0 ± 0.5 12.0 ± 0.1 (*) distance between seating plane and sprocket hole A (3.81) 4.0 ± 0.2 0.7 ± 0.2 direction of unreeling 12.7 ± 0.2 detail A 1.1.3. RADIAL POTTED BENT BACK LEADS BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H) (original pitch = 10.0 mm) (15) 1.0 max. 1.0 max. F’ 15.5 0.5 ± 0.5 F |F - F’| < 0.3 + 0.6 F = 7.5 - 0.1 10 18.0 ± 0.5 12.0 ± 0.1 1.0 max. 1.0 max. 38 max. 16 + 2.0 (*) - 0.0 11 max. 9.0 ± 0.5 (*) distance between reference plane and A sprocket hole (3.75) 7.5 ± 0.4 15 ± 0.2 Document Number: 28139 Revision: 03-Aug-10 Ø 4.0 ± 0.2 Cummulative pitch error over 20 pitches: ± 1.0 direction of unreeling For technical questions, contact: [email protected] 0.7 ± 0.2 detail A www.vishay.com 403 Taping, Special Kinking, Packaging and Labeling Vishay BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H) (original pitch = 15.0 mm) 1.0 max. 1.0 max. 1.0 max. 1.0 max. (30) 38 max. F’ 15.5 0.5 ± 0.5 F |F - F’| < 0.3 + 0.6 F = 7.5 - 0.1 16 + 2.0 (*) - 0.0 11 max. 9.0 ± 0.5 10 18.0 ± 0.5 12.0 ± 0.1 (*) distance between reference plane and A sprocket hole (3.75) 7.5 ± 0.4 15 ± 0.2 Ø 4.0 ± 0.2 0.7 ± 0.2 Cummulative pitch error over 20 pitches: ± 1.0 direction of unreeling detail A BENT BACK PITCH = 10 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H) (original pitch = 15.0 mm) 1.3 max. 2.0 max. 1.3 max. 2.0 max. (30) 37 max. 0.5 ± 0.5 16 + 2.0 (*) - 0.0 11 max. 9.0 ± 0.5 18.0 ± 0.5 12.0 ± 0.1 (*) distance between reference plane and A sprocket hole 15 ± 0.2 Ø 4.0 ± 0.2 direction of unreeling www.vishay.com 404 For technical questions, contact: [email protected] 0.7 ± 0.2 detail A Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay 1.2. RADIAL LACQUERED FILM CAPACITORS 1.2.1. RADIAL LACQUERED STRAIGHT LEADS PITCH = 5.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.0 mm (H) 1.0 max. (12.7) 6.35 ± 0.20 1.0 max. 1.0 max. + 0.5 5 - 0.1 0.5 + 1.5 - 0.0 1.0 max. 32 max. +2 18 - 0 11 max. 9.0 ± 0.5 12.0 ± 0.1 4 max. 18.0 ± 0.5 0.7 ± 0.2 Ø 4.0 ± 0.2 (3.85) A direction of unreeling detail A 12.7 ± 0.2 PITCH = 7.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.0 mm (H) 12.7 ± 0.4 0.5 + 1.5 - 0.0 (12.7) 1.0 max. 1.0 max. 1.0 max. 7.5 + 0.5 - 0.1 32 max. +2 18 - 0 (*) 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 4 max. (*) distance between A seating plane and sprocket hole (8.95) 0.7 ± 0.2 Ø 4.0 ± 0.2 direction of unreeling 12.7 ± 0.2 Document Number: 28139 Revision: 03-Aug-10 1.0 max. detail A For technical questions, contact: [email protected] www.vishay.com 405 Taping, Special Kinking, Packaging and Labeling Vishay PITCH = 10.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.0 mm (H); TWO TAPES 1.3 max. 12.7 ± 0.4 2 max. 1.3 max. 10+ 0.5 - 0.0 0.5 + 1.5 - 0.0 2 max. (25.4) 31 max. 18 + 2 (*) -0 11 max. 9.0 ± 0.5 18.0 ± 0.5 A (*) distance between seating plane and sprocket hole 6.0 ± 0.1 (7.7) 0.5 max. Ø 4.0 ± 0.2 12.7 ± 0.2 0.7 ± 0.2 direction of unreeling detail A PITCH = 10.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 18.0 mm (H); ONE TAPE 1.3 max. 12.7 ± 0.4 1.3 max. 10+ 0.5 - 0.1 0.5 + 1.5 - 0.0 31 max. +2 18 - 0 (*) 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 2 max. A (*) distance between seating plane and sprocket hole (7.7) 12.7 ± 0.2 www.vishay.com 406 2 max. (25.4) Ø 4.0 ± 0.2 0.7 ± 0.2 direction of unreeling For technical questions, contact: [email protected] detail A Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay 1.2.2. RADIAL LACQUERED FILM CAPACITORS PITCH = 5.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H) 1 max. (12.7) 6.35 ± 0.20 1 max. 1 max. 32 max. + 0.5 5 - 0.1 0.5 + 1.5 - 0.0 1 max. 16.0 ± 0.5 (*) 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 A (*) distance between seating plane and sprocket hole 0.7 ± 0.2 Ø 4.0 ± 0.2 (3.85) direction of unreeling detail A 12.7 ± 0.2 PITCH = 7.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H) 12.7 ± 0.4 + 1.5 0.5 - 0.0 (12.7) 1 max. 1 max. 1 max. 1 max. + 0.5 7.5 - 0.1 32 max. 16.0 ± 0.5 (*) 11.0 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 4 max. (*) distance between seating plane and sprocket hole (8.95) 12.7 ± 0.2 A 0.7 ± 0.2 Ø 4.0 ± 0.2 direction of unreeling detail A Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] www.vishay.com 407 Taping, Special Kinking, Packaging and Labeling Vishay PITCH = 10.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); TWO TAPES 1.3 max. 12.7 ± 0.4 + 1.5 0.5 - 0.0 2 max. 2 max. 1.3 max. (25.4) + 0.5 10.0 - 0.1 34 max. 16.0 ± 0.5 (*) 9.0 ± 0.5 11 max. 6.0 ± 0.1 A (*) distance between seating plane and sprocket hole 18.0 ± 0.5 (7.7) 0.7 ± 0.2 Ø 4.0 ± 0.2 12.7 ± 0.2 direction of unreeling detail A PITCH = 10.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); ONE TAPE 1.3 max. 12.7 ± 0.4 + 1.5 0.5 - 0.0 1.3 max. 2 max. 2 max. (25.4) + 0.5 10.0 - 0.1 34 max. A 16.0 ± 0.5 (*) 9.0 ± 0.5 11 max. 12.0 ± 0.1 18.0 ± 0.5 (*) distance between seating plane and sprocket hole (7.7) 0.7 ± 0.2 Ø 4.0 ± 0.2 12.7 ± 0.2 0.5 max. www.vishay.com 408 direction of unreeling For technical questions, contact: [email protected] detail A Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay PITCH = 15.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); TWO TAPE 12.7 ± 0.4 1.3 max. (25.4) 1.3 max. 2 max. + 0.5 15.0 - 0.1 + 1.5 0.5 - 0.0 2 max. 34 max. 16.0 ± 0.5 11 max. 9.0 ± 0.5 6.0 ± 0.1 18.0 ± 0.5 A (5.2) 0.5 max. Ø 4.0 ± 0.2 0.7 ± 0.2 direction of unreeling 12.7 ± 0.2 detail A PITCH = 15.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); ONE TAPE 12.7 ± 0.4 (25.4) 1.3 max. 1.3 max. + 0.5 15.0 - 0.1 0.5+ 1.5 - 0.0 9.0 ± 0.5 (5.2) 12.7 ± 0.2 0.5 max. 2 max. 34 max. 12.0 ± 0.1 18.0 ± 0.5 Document Number: 28139 Revision: 03-Aug-10 2 max. Ø 4.0 ± 0.2 16.0 ± 0.5 11 max. A 0.7 ± 0.2 direction of unreeling detail A For technical questions, contact: [email protected] www.vishay.com 409 Taping, Special Kinking, Packaging and Labeling Vishay 1.2.3. RADIAL LACQUERED BENT BACK LEADS BENT BACK PITCH = 5.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); 6 mm TAPE (original pitch = 7.5 mm) 6.35 ± 0.20 1.3 max. (12.7) 2.0 max. 1.3 max. 2.0 max. 0.5 ± 0.5 + 0.6 5.0 - 0.1 32 max. 16.0 ± 0.5 (*) 11 max. 9.0 ± 0.5 18.0 ± 0.5 6.0 ± 0.1 4 max. (3.85) Ø 4.0 ± 0.2 (*) distance between seating plane and sprocket hole A 0.7 ± 0.2 direction of unreeling 12.7 ± 0.2 detail A BENT BACK PITCH = 5.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); 12 mm TAPE (original pitch = 7.5 mm) 6.35 ± 0.20 1.0 max. (12.7) 1.0 max. 1.0 max. + 0.5 5.0 - 0.1 + 1.5 0.5 - 0.0 32 max. 16.0 ± 0.5 (*) 11 max. 9.0 ± 0.5 12.0 ± 0.1 4 max. 18.0 ± 0.5 Ø 4.0 ± 0.2 (3.85) A (*) distance between seating plane and sprocket hole 0.7 ± 0.2 direction of unreeling detail A 12.7 ± 0.2 www.vishay.com 410 1.0 max. For technical questions, contact: [email protected] Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay BENT BACK PITCH = 5.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); 6 mm TAPE (original pitch = 10.0 mm) 6.35 ± 0.20 1.3 max. (25.4) 1.0 max. 1.3 max. 1.0 max. 32 max. 5.0 + 0.6 - 0.1 + 1.5 0.5 - 0.0 16.0 ± 0.5 (*) 11 max. 9.0 ± 0.5 6.0 ± 0.1 18.0 ± 0.5 4 max. (3.85) (*) distance between seating plane and sprocket hole A 0.7 ± 0.2 Ø 4.0 ± 0.2 direction of unreeling 12.7 ± 0.2 detail A BENT BACK PITCH = 5.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); 12 mm TAPE (original pitch = 10.0 mm) 1.3 max. (25.4) 6.35 ± 0.20 1.3 max. 1.0 max. 1.0 max. 32 max. + 0.6 5.0 - 0.1 + 1.5 0.5 - 0.0 16.0 ± 0.5 (*) 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 4 max. (3.85) Ø 4.0 ± 0.2 (*) distance between seating plane and sprocket hole direction of unreeling 12.7 ± 0.2 Document Number: 28139 Revision: 03-Aug-10 A 0.7 ± 0.2 detail A For technical questions, contact: [email protected] www.vishay.com 411 Taping, Special Kinking, Packaging and Labeling Vishay BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); TWO TAPES (original pitch = 10.0 mm) 12.7 ± 0.2 + 1.5 0.5 - 0.0 (25.4) 1.3 max. 1.3 max. 1 max. seating plane + 0.6 7.5 - 0.1 1 max. 34 max. 16.0 ± 0.5 (*) 11 max. 9.0 ± 0.2 6.0 ± 0.1 18.0 ± 0.5 A (*) distance between seating plane and sprocket hole 6.0 ± 0.1 (8.95) Ø 4.0 ± 0.2 0.7 ± 0.2 12.7 ± 0.2 direction of unreeling detail A BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); ONE TAPE (original pitch = 10.0 mm) 12.7 ± 0.2 + 1.5 0.5 - 0.0 (25.4) 1.3 max. 1 max. 1.3 max. seating plane + 0.6 7.5 - 0.1 1 max. 34 max. 16.0 ± 0.5 (*) 11 max. 9.0 ± 0.2 12.0 ± 0.1 18.0 ± 0.5 A (*) distance between seating plane and sprocket hole (8.95) Ø 4.0 ± 0.2 0.7 ± 0.2 12.7 ± 0.2 direction of unreeling www.vishay.com 412 For technical questions, contact: [email protected] detail A Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H) (original pitch = 10.0 mm) (15) 1.0 max. 1.0 max. 1.0 max. |F - F'| < 0.3 + 0.6 F = 7.5 - 0.1 1.0 max. 38 max. F' 0.5 ± 0.5 F 10 15.5 18.0 ± 0.5 + 2.0 16.0 - 0.0(*) 11 max. 9.0 ± 0.5 12.0 ± 0.1 (*) distance between reference plane and A sprocket hole (3.75) 7.5 ± 0.4 Ø 4.0 ± 0.2 0.7 ± 0.2 15.0 ± 0.2 Cummulative pitch error over 20 pitches: ± 1.0 detail A direction of unreeling BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H); NAKED BELLY (original pitch = 10.0 mm) (15) 1.0 max. 1.0 max. |F - F'| < 0.3 + 0.6 F = 7.5 - 0.1 F' 1.0 max. 1.0 max. 36 max. 0.5 ± 0.5 F 10 18.0 ± 0.5 15.5 + 2.0 16.0 - 0.0(*) 11 max. 9.0 ± 0.5 12.0 ± 0.1 (*) distance between reference plane and A sprocket hole (3.75) 7.5 ± 0.4 Ø 4.0 ± 0.2 15.0 ± 0.2 Cummulative pitch error over 20 pitches: ± 1.0 0.7 ± 0.2 detail A direction of unreeling Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] www.vishay.com 413 Taping, Special Kinking, Packaging and Labeling Vishay BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H); NAKED BELLY (original pitch = 15.0 mm) 1.0 max. 1.0 max. 1.0 max. (30) 1.0 max. 38 max. F' 0.5 ± 0.5 15.5 F |F - F'| < 0.3 + 0.6 F = 7.5 - 0.1 + 2.0 16.0 - 0.0(*) 11 max. 9.0 ± 0.5 10 18.0 ± 0.5 12.0 ± 0.1 (*) distance between reference plane and A sprocket hole (3.75) 7.5 ± 0.4 Ø 4.0 ± 0.2 0.7 ± 0.2 15.0 ± 0.2 Cummulative pitch error over 20 pitches: ± 1.0 detail A direction of unreeling BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); TWO TAPES (original pitch = 15.0 mm) 12.7 ± 0.2 + 1.5 0.5 - 0.0 (25.4) 1.3 max. 1.3 max. 2.0 max. 2.0 max. 39 max. + 0.6 7.5 - 0.1 + 2.0 16.0 - 0.0 (*) 11 max. 9.0 ± 0.2 6.0 ± 0.1 18.0 ± 0.5 A (*) distance between seating plane and sprocket hole 6.0 ± 0.1 (8.95) Ø 4.0 ± 0.2 0.7 ± 0.2 12.7 ± 0.2 direction of unreeling detail A www.vishay.com 414 For technical questions, contact: [email protected] Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); ONE TAPE (original pitch = 15.0 mm) 12.7 ± 0.2 + 1.5 0.5 - 0.0 1.3 max. (25.4) 1.3 max. 2.0 max. 2.0 max. 39 max. + 0.6 7.5 - 0.1 + 2.0 16.0 - 0.0(*) 11 max. 9.0 ± 0.2 12.0 ± 0.1 18.0 ± 0.5 A (*) distance between seating plane and sprocket hole (8.95) Ø 4.0 ± 0.2 0.7 ± 0.2 12.7 ± 0.2 direction of unreeling detail A BENT BACK PITCH = 7.5 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H); ONE TAPE (original pitch = 15.0 mm) 1.0 max. (30) 1.0 max. 1.0 max. 1.0 max. 38 max. 0.5 ± 0.5 15.5 F' |F - F'| < 0.3 F F = 7.5 + 0.6 - 0.1 + 2.0 16.0 - 0.0 (*) 11 max. 9.0 ± 0.5 10 18.0 ± 0.5 12.0 ± 0.1 (*) distance between reference plane and A sprocket hole (3.75) 7.5 ± 0.4 Ø 4.0 ± 0.2 0.7 ± 0.2 15.0 ± 0.2 Commulative pitch error over 20 pitches: ± 1.0 detail A direction of unreeling Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] www.vishay.com 415 Taping, Special Kinking, Packaging and Labeling Vishay BENT BACK PITCH = 10.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); TWO TAPES (original pitch = 15.0 mm) 12.7 ± 0.4 (25.4) 1.3 max. 2 max. 1.3 max. 2 max. 34 max. + 1.5 0.5 - 0.0 + 0.5 10.0 - 0.1 16.0 ± 0.5 11 max. 9.0 ± 0.5 6.0 ± 0.1 18.0 ± 0.5 A (5.2) 0.5 max. Ø 4.0 ± 0.2 0.7 ± 0.2 direction of unreeling 12.7 ± 0.2 detail A BENT BACK PITCH = 10.0 mm (P); SPROCKET HOLE 12.7 mm (P0); TAPING HEIGHT 16.0 mm (H); ONE TAPE (original pitch = 15.0 mm) 12.7 ± 0.4 (25.4) 1.3 max. 1.3 max. 2 max. 2 max. 34 max. + 1.5 0.5 - 0.0 + 0.5 10.0 - 0.1 16.0 ± 0.5 11 max. 9.0 ± 0.5 12.0 ± 0.1 18.0 ± 0.5 (5.2) 12.7 ± 0.2 www.vishay.com 416 Ø 4.0 ± 0.2 A 0.7 ± 0.2 direction of unreeling detail A For technical questions, contact: [email protected] Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay BENT BACK PITCH = 10.0 mm (P); SPROCKET HOLE 15.0 mm (P0); TAPING HEIGHT 16.0 mm (H); ONE TAPE (original pitch = 15.0 mm) 1.0 max. 1.0 max. 2.0 max. 2.0 max. (30) 15.0 ± 0.4 38 max. F' 0.5 ± 0.5 15.5 F |F - F'| < 0.3 + 0.6 F = 10.0 - 0.1 + 2.0 16.0 - 0.0 (*) 11 max. 9.0 ± 0.5 10 18.0 ± 0.5 12.0 ± 0.1 (*) distance between reference plane and A sprocket hole 4.0 ± 0.2 (10) 15.0 ± 0.2 0.7 ± 0.2 Commulative pitch error over 20 pitches: ± 1.0 detail A direction of unreeling 1.3. TAPING CHARACTERISTICS FOR RADIAL POTTED AND LACQUERED FILM CAPACITORS RADIAL LEADS DESCRIPTION VALUE Pull-out force of the component ≥5N Peel-off force of adhesive tape ≥6N Tearing force of tape ≥ 15 N Storage conditions Storage temperature - 25 to + 40 °C Maximum relative humidity without condensation Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] 80 % www.vishay.com 417 Taping, Special Kinking, Packaging and Labeling Vishay 2. SPECIAL KINKING INFORMATION RADIAL LACQUERED FILM CAPACITORS WITH DOUBLE KINK General data 168x12(halfpage) l W DOUBLE CONICAL HOLE h 1.6 β ≤ 15° lt Ø dt > 0.5 MAGNIFIED VIEW P A β ≤ 15° DIRECTION A A β ≤ 15° DOUBLE KINK CAPACITORS PITCH (mm) LEAD DIAMETER (mm) 10.0 ± 1.0 0.6 15.0 ± 1.0 0.8 22.5 ± 1.0 0.8 27.5 ± 1.0 0.8 The capacitors are usable for radial manual insertion on PCB. The fixation on the board by double kinked leads prevents that the component jumps out of the PCB during transport. The components with lead diameter of 0.6 mm are usable for being inserted in punched holes with nominal diameter of 0.8 mm and the components with lead diameter of 0.8 mm are usable for being inserted in punched holes with nominal diameter of 1.0 mm. The pitch is specified on the top of the leads. After manufacturing, the products meet the specification. Although special care is taken to the packaging, deviations may occur due to transport. www.vishay.com 418 For technical questions, contact: [email protected] Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay Ø 1.15 ± 0.10 1.07 ± 0.1 1.6 Ø 0.8 + 0.1 - 0.0 Ø 1.00 ± 0.05 Ø 0.6 Scale ± 10/1 10 Ø 1.3 ± 0.1 1.07 ± 0.1 1.6 + 1.0 Ø 1.0 - 0.0 Ø 1.20 ± 0.05 Scale ± 10/1 Ø 0.8 15.0/22.5/27.5 3. PACKAGING INFORMATION 3.1. LOOSE IN BOX 3.1.1. Lacquered capacitors (all pitches) and potted capacitors (pitch ≤ 15 mm: all; pitch > 15 mm: long leads) “Loose in box” capacitors are packed in carton boxes. For quantities per box see detail specifications. 3.1.2. Potted capacitors (pitch > 15 mm, short leads) “Loose in box” capacitors are packed in tray form. For quantities per box see detail specifications. Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] www.vishay.com 419 Taping, Special Kinking, Packaging and Labeling Vishay 3.2 TAPED ON REEL 3.2.1 SMALL REELS (356 mm)/AMMOPACK 18 Ø 77 Ø 30 Ø 85.6 Ø 92 Ø 356 max. 22.5 W + 10 Direction of unreeling W + 31 250 max. 360 360 52 max. 340 max. 3.2.2 LARGE REELS (500 mm)/AMMOPACK W 18 Ø 85.6 Ø 30 Ø 77 Ø 92 Ø 500 max. 22.5 W + 16 Direction of unreeling W + 31 465 max. 470 470 57 max. (6e - 9e) 70 max. (11e) 490 max. www.vishay.com 420 For technical questions, contact: [email protected] Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay W AS A FUNCTION OF PRODUCT HEIGHT h (mm) W ± 2 mm 40 45 50 55 60 65 ≤ 9.0 10.0 up to and including 15.0 15.5 up to and including 19.5 21.0 up to and including 23.0 25.0 up to and including 28.0 31.0 The cumulative pitch error is: 1.0 mm per 20 pitches. The maximum number of empty positions per reel shall not exceed 0.5 % (1) of the total number of components per reel, but no more than 2 consecutive positions may be vacant provided this gap is followed by 6 consecutive components. Note 1. Potted: this 5 % for capacitors in ammopack (exept for capacitors with w = 2.5 or 3.5 mm and l = 7.2 mm) lacquered for pitches 15 and 22.5 mm: 5 % for capacitors in ammopack (exept for capacitors with w = 2.5 or 3.5 mm and l = 7.2 mm) 3.2.3 LARGE REELS (500 mm; MOUNTING WHEEL INNER DIAMETER 77 mm)/AMMOPACK RADIAL PLASTIC (ROBOTIC INSERTION) C Reel Packaging Unreel Direction Ø 500 ± 1 Ø 77 ± 0.5 Ø 92 Ø 30 + 0.2 - 0 A B MAX. CAP. HEIGHT 360 Max. Ammo - Packaging REEL - DIMENSIONS in millimeters H A B C 20 52 70 28 25 57 75 33 30 82 80 38 35 67 85 43 40 72 90 48 x. 0 51 Ma 60 M ax. Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] www.vishay.com 421 Taping, Special Kinking, Packaging and Labeling Vishay 3.2.4 LARGE REELS (500 mm; MOUNTING WHEEL INNER DIAMETER 126 mm)/AMMOPACK RADIAL PLASTIC (ROBOTIC INSERTION) C Reel Packaging Unreel Direction Ø 500 ± 1 Ø 126 ± 0.5 Ø 150 Ø 25 + 0.2 - 0 A B MAX. CAP. HEIGHT 360 Max. Ammo - Packaging REEL - DIMENSIONS in millimeters H A B C 20 52 70 28 25 57 75 33 30 82 80 38 35 67 85 43 40 72 90 48 . ax 0M 51 60 M ax. www.vishay.com 422 For technical questions, contact: [email protected] Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay 3.2.5 SMALL REELS (350 mm)/AMMOPACK LETTER CODES FOR TAPING OF RADIAL LEADED CAPACITORS (Pitch 5 mm to 15 mm) LETTER CODE TYPE OF PACKAGING HEIGHT (H) (mm) D AMMO 16.5 G AMMO 18.5 F REEL 16.5 W REEL 18.5 REEL FOR RADIALLY TAPED CAPACITORS (Box size 50 mm x 370 mm x 370 mm) CARDBOARD BOX FOR RADIALLY TAPED CAPACITORS (Ammo - Packaging) 210 Max. A Cardboard Clamp B Interlayer Paper D Protective Tape . ax WS M 40 3 55 M ax. DIMENSIONS (mm) D = Ø 350 A = Ø 30 B = Ø 85 WS = 52 Max. Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] www.vishay.com 423 Taping, Special Kinking, Packaging and Labeling Vishay 3.2.6 AXIAL TYPES AXIAL FILM CAPACITORS ACC. TO EN/IEC 60286-1 1. Capacitor D 350 + 5.0 2. Tape 16.0 ± 0.5 C 3. Kraft paper layers between components for protection 4 4. Flange (3.0mm thick) 5 5. Reel 6 6. Plastic hub A. Inner spacing of tapes B. Outer spacing of tapes C. Inner reel width 1 D. Outer reel width 2 E. Width of kraft paper layers F. Width of outer kraft paper layers S. Component spacing E 3 At the Beginning and End 300.0 Min. B A L f T. Permissible deviation over 10 spaces L. Body length of capacitor S f. ≥ 19.0 mm 1.2 Max. x. ± 0.5 for Lmax. ≤ 26 mm 6.0 ± 0.5 9.0 ± 1.0 x. ± 0.7 for Lmax. > 26 mm Note: The capacitors can also be supplied in cardboard box (Ammopack) x x WIDTH OF ADHESIVE TAPE: 6.0 mm ± 0.5 mm for class I, II and III (S = 10.0 ± 0.5) 9.0 mm ± 1.0 mm for class III (S = 15.0 ± 0.5) and IV MKT 1813, MKP 1839, MKP 1845, MKC 1860 CAP. DIM. ØD ≤ 5.0 > 5.0 ≤ 7.0 > 5.0 ≤ 9.5 11.5 11.5 22.0 Lmax. Input Class A mm S mm T mm B mm C mm Dmax. mm E mm 6 I 53 ± 2 5 ± 0.5 ±2 65 ± 2 70-1 80 68-1 65 ± 2 70-1 80 68-1 75 ± 2 85-1 95 83-1 85 ± 2 100-1 110 98-1 6 I 6 II > 5.0 ≤ 9.5 31.5 6 > 9.5 ≤ 13.5 31.5 9 > 13.5 ≤ 18.0 31.5 9 > 13.5 41.5 9 IV (1) 41.5 III 9 53 ± 2 63 ± 2 10 ± 0.5 10 ± 0.5 ±2 ±2 73 ± 2 10 ± 0.5 III 73 ± 2 15 ± 0.75 ±3 91 ± 2 100-1 110 98-1 IV 73 ± 2 20 ± 1 ±4 91 ± 2 100-1 110 98-1 73 ± 2 20 ± 1 ±4 91 ± 2 100-1 110 98-1 91 ± 2 100-1 110 98-1 IV 73 ± 2 30 ± 1 ±2 ±4 Note: (1) Taping for L max. = 41.5 mm upon request www.vishay.com 424 For technical questions, contact: [email protected] Document Number: 28139 Revision: 03-Aug-10 Taping, Special Kinking, Packaging and Labeling Vishay 4. LABELLING INFORMATION 2D LABEL EXPLANATION: LINE 1 2 3 4 5 6 7 8 2D barcode and manufacturer’s logo Type description Capacitance value Tolerance Voltage Class (if applicable) Batch number Lot number Date code Factory code Quantity Part number SAP number RoHS symbols S.L.: Stocking location Vishay catalog number REGION: Plant number Climatic category (if applicable) PO: Production order PI: Production item SER.N. box number Document Number: 28139 Revision: 03-Aug-10 For technical questions, contact: [email protected] www.vishay.com 425