KBJL4J-C THRU KBJL4M-C Glass Passivated Single-Phase Bridge Rectifier Reverse Voltage - 600V to 1000V Forward Current - 4.0 Amperes Features ◆ Thin Single In-Line package; ◆ Ideal for printed circuit boards; ◆ Glass Passivated chip junction; ◆ Low profile package; ◆ High Surge current capability; ◆ High case dielectric strength of 2000 V RMS; ◆ Plastic package has Underwrites Laboratory Flammability Classification 94V-0; ◆ Same footprint V.S KBJ (3S) package; + Mechanical Data ◆ Case: KBJL; Epoxy meets UL-94V-0 Flammability rating; ◆ Terminals:Matte tin plated leads, solderable per J-STD-002 and JESD22-B102; E3 suffix for customer grade, meet JESD 201 class 1A whisker test; ◆ High temperature soldering guaranteed: Solder Dip 275℃,40seconds; ◆ Polarity: As marked on body; ◆ Mounting Torgue: 5.7cm-kg (5.0 inches-lbs) max; ◆ Recommend Torgue:Mounting Torgue: 5.7cm-kg (5inches-lbs); ~ ~ - Package Dimensions in mm Typical Applications General purpose use in AC-to-DC bridge full wave rectification for Switching Power Supply, Home Appliances, Office Equipment, Industrial Automation applications. Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Symbol KBJL4J-C KBJL4K-C KBJL4M-C Parameter Maximum repetitive peak reverse voltage VRRM 600 800 Maximum RMS voltage VRMS 420 Maximum DC blocking voltage VDC 600 Maximum average forward rectified output current at TC=110℃ TA=25℃ Peak forward surge current 8.3 ms single sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t<8.3ms) Maximum Instantaneous forward voltage drop per leg at 2.0A Maximum DC Reverse Current at Rated DC Blocking Voltage per leg TA=25℃ TA=125℃ Typical thermal resistance per leg Operating junction and Storage Temperature Range IF(AV) Unit 1000 V 560 700 V 800 1000 V 4.0 (1) 2.0 (2) Amps IFSM 90 Amps I2 t VF 34 A2sec Volt IR 0.96 5 150 RӨJA 20 (2) RӨJC 2.5 (1) -55 to +150 TJ,TSTG μA ℃/W ℃ Notes: 1). Unit case mounted on Al plate heatsink; 2). Units mounted on PCB without heatsink; 3). Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw. KBJL4J-C THRU KBJL4M-C Glass Passivated Single-Phase Bridge Rectifier Reverse Voltage - 600V to 1000V Forward Current - 4.0 Amperes RATINGS AND CHARACTERISTICS CURVES (TA=25℃ unless otherwise noted) 90 Peak Forward Surge Current (A) Average Forward Output Current (A) 5 Heatsink Mounting,TC 4 3 P.C.B Mounting,TA 2 1 0 Temperature (℃) 100 30 1.0 Cycle 150 100 1 10 100 Number of Cycles at 60Hz Figure 2. Maximum Non-Repetitive Peak Forward Surge Current per Diode 1000 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 60 0 50 0 Figure 1. Derating Curve Output Rectified Current TJ=25℃ 1 0.1 0.01 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Instantaneous Forward Voltage (V) 1000 100 TJ=150℃ 10 TJ=125℃ 1 0.1 TJ=25℃ 0.01 20 40 60 80 100 10 1 0.1 1 10 100 Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Instantaneous Reverse Current (A) TJ=TJ Max. Single Sine-Wave 100 Percent of Rated Peak Reverse Voltage (%) Figure 5. Typical Reverse Characteristics Per Diode Figure 4. Typical Junction Capacitance Per Diode