GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER GBPC1005 THRU GBPC110 FEATURES • • • • • • • • Plastic package has underwriters laboratory Flammability classification 94V-0 Glass passivated ship junction High case dielectric with standing voltage of 1500VRMS Tyoical IR less than 0.1μA High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed 260℃/10 seconds, 0.375” (9.5mm) lead length at 5 lbs (2.3kg) tension MECHANICAL DATA • • • • Case: Epoxy, Molded Plastic body over passivated junctions Terminal: Plated leads solderable per MIL-STD-750 method 2026 Mounting position: Any (Note 1) Weight: 0.1 ounce, 2.8 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward output current at TC=60℃(Note2) TA=25℃(Note3) Peak Forward Surge Current single half sine-wave superimposed on rated load (JEDEC method) TC=60℃ Maximum Instantaneous Forward Voltage Drop Per element at 1.5A Rating for Fusing (t＜8.3ms) Maximum Average Reverse Current at rated DC Blocking Voltage TA = 25℃ TA = 125℃ Typical Thermal Resistance per leg (NOTE 1) Operating and Storage Temperature Range SYMBOLS GBPC 1005 GBPC 101 GBPC 102 GBPC 104 GBPC 106 GBPC 108 GBPC 110 UNIT VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 3.0 2.0 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts I(AV) Amps IFSM 60 Amps VF 1.0 Volts 2 127 5.0 500 8.0 12 (-55 to +150) A2s It IR RθJL RθJA TJ, TSTG Notes: 1. Bolt down on heatsink with silicon thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw. 2. Unit mounted 1.0”*4.0”*0.11” think(10.5*10.5*0.3cm)A1.Plate 3. Unit mounted on P.C.B. at 0.375”(9.5mm) lead with 0.5”*0.5”(12*12mm) copper pads Web Site: www.hkmic.com µA ℃/W ℃ GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER GBPC1005 THRU GBPC110 RATINGS AND CHARACTERISTICS CURVES GBPC1005 THRU GBPC110 5.0 Case Temperature, Tc Heatsink Mounting 4.0×4.0×0.11" Thk (10.5×10.5×0.3 cm) AL. Plate 60 Hz Resistive or Inductive Load 4.0 3.0 2.0 1.0 TA Ambient Temperature, P.C.B. Mounting 0.375" ( 9.5mm) Lead Length 0 50 0 150 100 AMBIENT TEMPERATURE, ℃ FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG PEAK FORWARD SURGE CURRENT(A) AVERAGE FORWARD OUTPUT, CURRENT(A) FIG. 1 - DERATING CURVE OUTPUT RECTIFIED CURRENT 60 TC=60℃ SINGLE SINE-WAVE 50 40 30 20 10 1.0 CYCLE 0 NUMBER OF CYCLES AT 60 Hz FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT (A ) TJ =25℃ PULSE WIDTH=300μs 1% DUTY CYCLE 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 TRANSIENT THERMAL IMPEDANCE, (℃/W) JUNCTION CAPACITANCE, pF 10 1 0.1 1.0 10 TJ =125℃ 1 0.1 TJ =25℃ 0.01 0 40 20 60 100 80 FIG .6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG TJ =25℃ f=1.0 MHz Vsig=50mVp-p 10 PERCENT OF RATED PEAK REVERSEVOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, (V) 100 50 INSTANTANEOUS REVERSE CURRENT (μA) 20 10 100 10 1 100 REVERSE VOLTAGE,(V) Web Site: www.hkmic.com 100 10 1 0.1 0.01 0.1 1 t, HEATING TIME, sec. 10 100