PSMBU31 SERIES 30W Medical AC/DC Open Frame Power Supplies Rev A Wall Industries, Inc. FEATURES • Class I • Wide Input Voltage Range: 90~264VAC, 47~63Hz • RoHS Compliant • Over Voltage & Over Load Protection • Internal EMI Filter • Output Voltage Protection (Crowbar Design) • Single Output • Meets FCC Part-18 Class B & CISPR-11 EN55011 Class B Emission Limits • 30 Watts Output Power • ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd Edition) & EN 60601-1: 2006 • Input to Output: 2MOPP (TUV/T-mark 3rd Edition) • Up to 85% High Efficiency • 100% Burn-in Tested DESCRIPTION Size: 4.00 x 1.99 x 1.16 inches 101.5 x 50.5 x 29.5 mm Weight: 7.05oz (200g) The PSMBU31 series of class I medical AC/DC switching power supplies provides 30 Watts of continuous output power in a 4.00” x 1.99” x 1.16” open frame package. This series consists of single output models with a wide input voltage range of 90~264VAC. Some features include high efficiency up to 85%, internal EMI filter, 2MOPP insulation, and over load and over voltage protection. All models meet FCC Part-18 class B and CISPR-11 EN55011 class B emission limits. This series also has ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition) and EN 60601-1: 2006 (TUV/T-mark 3rd edition) medical approvals. All models are RoHS compliant and have been 100% burn-in tested. MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current Ripple & Noise Total Regulation Output Power PSMBU31-102 5 VDC 6000mA 50mVp-p 5% 30W PSMBU31-103 7 VDC 4280mA 70mVp-p 5% 30W PSMBU31-104 9 VDC 3330mA 90mVp-p 5% 30W PSMBU31-105 12 VDC 2500mA 120mVp-p 5% 30W 15 VDC 2000mA 150mVp-p 5% 30W PSMBU31-107 18 VDC 1660mA 180mVp-p 5% 30W PSMBU31-108 24 VDC 1250mA 240mVp-p 3% 30W PSMBU31-109 30 VDC 1000mA 300mVp-p 3% 30W PSMBU31-110 36 VDC 830mA 360mVp-p 3% 30W 90 ~ 264 VAC PSMBU31-106 DERATING 120 NOTES: Output Power (%) 100 1. Operating Temperature: 0°C to +70°C 2. Derating linearly from 100% load at 50°C to 50% load at 70°C 80 60 40 20 0 03/10/2014 0 10 20 30 40 50 60 Ambient Temperature (°C) 70 80 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 PSMBU31 SERIES 30W Medical AC/DC Open Frame Power Supplies Rev A Wall Industries, Inc. SPECIFICATIONS: PSMBU31 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Safety Approvals Input Voltage Range Operating Input Voltage Range Input Voltage 100 90 47 Input Frequency Input Current Inrush Current No Load Power Consumption 100VAC, full load 240VAC, full load 115VAC, full load, 25°C, cold start 230VAC, full load, 25°C, cold start 230VAC, no load 240 264 63 0.7 0.3 VAC Hz A 15 30 0.5 A W OUTPUT SPECIFICATIONS Output Voltage See Table Line Regulation LL to HL, full load 1 % Load Regulation 230VAC 5 % 30 W 1 % Output Power Output Current See Table Ripple & Noise (peak to peak) 90VAC, full load Hold-up Time 110VAC, full load 10 Start-up Time 100VAC, full load 0.3 Transient Response Time 100VAC, Full load to half load Temperature Coefficient 0~50°C ms 2 s 4 ms -0.04 +0.04 %/°C Over Voltage Protection 112 132 % Over Current Protection 110 150 % 76.4 6578 2121 50 85 % PROTECTION GENERAL SPECIFICATIONS Efficiency Isolation Resistance 230VAC, full load Primary to Secondary Primary to PE Test Voltage = 500VDC Leakage Current 240VAC/60Hz Dielectric Withstanding Voltage (2MOPP Insulation) VDC MΩ 0.1 mA 0 +70 °C -40 +85 °C ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derating linearly from 100% Load at 50°C to 50% load at 70°C Storage Temperature Operating Humidity 0 95 % Storage Humidity 0 95 % 3000 m Operating Altitude Cooling Free air convection MTBF MIL-HDBK-217F, 25°C 100,000 hours PHYSICAL SPECIFICATIONS Weight 7.05oz (200g) Dimensions (L x W x H) 4.00 x 1.99 x 1.16 inch (101.5 x 50.5 x 29.5 mm) Input Connector Mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal Output Connector Mates with Molex housing 09-50-3061 and Molex 2478 series crimp terminal SAFETY & EMC Safety Approvals ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition); EN 60601-1:2006 (TUV/T-mark 3rd edition); CE EMI Requirements for CISPR-11 220VAC B Class EMI Requirements for FCC PART-18 110VAC B Class 03/10/2014 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 PSMBU31 SERIES 30W Medical AC/DC Open Frame Power Supplies Rev A Wall Industries, Inc. 1.16 [29.5] MECHANICAL DRAWING 4.00 [101.5] SCR1 P1 L ADJ VR1 C31 ZD3 D1 Q1 T1 1 ZD2 C10 N DC OUTPUT D3 L3 F1 DB1 TH1 C19 F2 LED1 T2A250V C4 C3 1.99 [50.5] HS2 0.18 [4.6] 0.61 [15.6] 0.62 [15.8] IC2 C7 HS1 AC OUTPUT 6 C21 P2 L2 MOV1 G PITCH=7.92mm 0.16 [4.0] C6 T2A250V 1.67 [42.5] 0.16 [4.0] 3.68 [93.5] L1 C1 C30 N1 C32 Ø0.16 [Ø4.0] MOUNTING HOLES X 4 C16 PITCH=3.96mm NOTES: 1. Unit: inches [mm] 2. Tolerance: ±0.02 [±0.5] 3. Weight: Approximately 7.05oz (200g) 4. Input Connector: Mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal 5. Output Connector: Mates with Molex housing 09-50-3061 and Molex 2478 series crimp terminal 6. All dimensions are for reference only COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 03/10/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Road Exeter, NH 03833 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3