PSSBU99 SERIES 100 Watt AC/DC Open Frame Power Supplies Rev B FEATURES • Class I • RoHS Compliant • Internal EMI Filter • 100 Watts Output Power • Active Power Factor Correction • 100% Burn-in Tested • Single Output Voltages Available from 11VDC to 55VDC • Over Voltage Protection (Crowbar Design) • Input Surge Current, Over Voltage, and Over Load Protection • Wide Input Voltage Range: 90~264VAC, 47~63Hz • Meets FCC Part-15 Class B and CISPR-22 Class B Emission Limits • UL/cUL(UL 60950-1:2nd Edition) Safety Approvals DESCRIPTION Size: Weight: 4.00 x 2.00 x 1.09 inches 6.3~8.8oz (180~250g) The PSSBU99 series of Class I AC/DC switching mode power supplies provides 100 Watts of continuous output power in a 4.00” x 2.00” x 1.09” open frame package. This series consists of single output models ranging from 11VDC to 55VDC with a wide input voltage range of 90~264VAC. These power supplies have active PFC, an internal EMI filter, and over load, over voltage, and input surge current protection. This series also has UL/cUL (UL 60950-1: 2nd edition) safety approvals and meets FCC Part-15 class B and CISPR-22 Class B emission limits. These supplies are well suited for use in industrial equipment as well as many other applications. TECHNICAL SPECIFICATIONS: PSSBU99 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Safety Approvals Input Voltage Range Operating Input Voltage Range Input Voltage 100 90 47 Input Frequency Input Current Inrush Current No Load Power Consumption Power Factor Correction OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Ripple & Noise (peak to peak) Hold-up Time Start-up Time Transient Response Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency Dielectric Withstanding Voltage Isolation Resistance Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Cooling MTBF PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) Input Connector Output Connector SAFETY & EMC Safety Approvals EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 01/22/2016 100VAC, full load 240VAC, full load 115VAC, full load, 25°C, cold start 230VAC, full load, 25°C, cold start 230VAC, no load 240VAC, full load 0.95 See Table 1 See Table 100 See Table 1 LL to HL, full load 230VAC 90VAC, full load 110VAC, full load 100VAC, full load 100VAC, Full load to half load 0~50°C Hz A A W % W -0.04 1 4 +0.04 112 110 132 150 % % 87 4242 2121 50 91 % VDC 0.75 Derating linearly from 100% Load at 25°C to 50% load at 70°C VAC % ms s ms %/°C 16 230VAC, full load Primary to Secondary Primary to PE Test Voltage = 500VDC 240VAC/60Hz MIL-HDBK-217F, 25°C 240 264 63 1.4 0.7 50 100 0.5 1 0 -40 0 0 +70 +85 95 95 Free air convection 100,000 MΩ mA °C °C % % hours 6.3~8.8oz (180~250g) 4.00 x 2.00 x 1.09 inches (138.0 x 87.0 x 44.6 mm) Mates with JST housing VHR-3N and JST SVH series crimp terminal Mates with JST housing VHR-6N and JST SVH series crimp terminal 220VAC 110VAC UL/cUL (UL 60950-1: 2nd edition) B Class B Class Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 PSSBU99 SERIES 100 Watt AC/DC Open Frame Power Supplies Rev B MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current Total Regulation Ripple & Noise PSSBU99-105 11 ~ 13 VDC 8.33 ~ 7.69 A 3% 1% 100W PSSBU99-106 13 ~ 16 VDC 7.69 ~ 6.25 A 3% 1% 100W PSSBU99-107 16 ~ 21 VDC 6.25 ~ 4.76 A 3% 1% 100W PSSBU99-108 21 ~ 27 VDC 4.76 ~ 3.70 A 2% 1% 100W 27 ~ 33 VDC 3.70 ~ 3.03 A 2% 1% 100W PSSBU99-110 33 ~ 40 VDC 3.03 ~ 2.50 A 2% 1% 100W PSSBU99-111 40 ~ 50 VDC 2.50 ~ 2.00 A 2% 1% 100W PSSBU99-112 50 ~ 55 VDC 2.00 ~ 1.81 A 2% 1% 100W PSSBU99-109 90 ~ 264 VAC Output Power DERATING CURVE MECHANICAL DRAWING PIN CONNECTION PIN DESIGNATION 1 OUT 2 OUT 3 OUT 4 RTN 5 RTN 6 RTN Notes: 1. 2. 3. 01/22/2016 Dimensions are shown in mm (in) Input connector mates with JST housing VHR-3N and JST-SVH series crimp terminal. Output connector mates with JST housing VHR-6N and JST SVH series crimp terminal Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev B PSSBU99 SERIES 100 Watt AC/DC Open Frame Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 01/22/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3