PSMBU152 SERIES 150W Medical AC/DC Open Frame Power Supplies Rev A Wall Industries, Inc. FEATURES Class I RoHS Compliant Active Power Factor Correction 5” x 3” x 1.44” Open Frame Package 12VDC & 24VDC Single Outputs 150 Watts Output Power Input to Output: 2MOPP Up to 89% High Efficiency Wide Input Voltage Range: 90~260VAC, 47~63Hz Over Voltage & Over Current Protection Meets FCC Part-18 Class B & CISPR-11 EN55011 Class B Emission Limits ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd Edition) & EN 60601-1: 2006 (TUV/T-mark 3rd Edition) 100% Burn-in Tested DESCRIPTION The PSMBU152 series of class I medical AC/DC switching power supplies provides 150 Watts of continuous output power in a 5.00” x 3.00” x 1.44” open frame package. This series consists of 12VDC and 24VDC single output models with a wide input voltage range of 90~260VAC. Some features include high efficiency up to 89%, active power factor correction, 2MOPP insulation, and over current and over voltage protection. All models meet FCC Part-18 class B and CISPR-11 EN55011 class B emission limits. This series also has ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition) and EN 60601-1: 2006 (TUV/T-mark 3rd edition) medical approvals. All models are RoHS compliant and have been 100% burn-in tested. Size: 5.00 x 3.00 x 1.44 inches 127.0 x 76.2 x 36.6 mm SPECIFICATIONS: PSMBU152 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Safety Approvals Input Voltage Range Operating Input Voltage Range Input Voltage 100 90 47 1.74 0.71 Input Frequency Input Current Inrush Current No Load Power Consumption Power Factor Correction OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Ripple & Noise (peak to peak) Hold-up Time Start-up Time Transient Response Time Temperature Coefficient PROTECTION Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency Dielectric Withstanding Voltage Isolation Resistance Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Operating Altitude Cooling MTBF PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) Input Connector Output Connector SAFETY & EMC Safety Approvals EMI Requirements for CISPR-11 EMI Requirements for FCC PART-18 11/18/2013 100VAC, full load 240VAC, full load 115VAC, full load, 25°C, cold start 230VAC, full load, 25°C, cold start 230VAC, no load 240VAC, full load 240 260 63 1.76 0.73 50 100 1.2 1 0.95 VAC Hz A A W See Table LL to HL, full load 230VAC 0.5 3 90VAC, full load 110VAC, full load 100VAC, full load 100VAC, Full load to half load 0~50°C Derating linearly from 100% Load at 50°C to 50% load at 70°C % % W -0.04 2 4 +0.04 % ms s ms %/°C 112 110 132 150 % % 84 6990 2121 50 89 % 20 230VAC, full load Primary to Secondary (2MOPP Insulation) Primary to PE Test Voltage = 500VDC 240VAC/60Hz MIL-HDBK-217F, 25°C 1 5 150 See Table 1 VDC 0.25 0 -40 0 0 +70 +85 95 95 3000 Free air convection 100,000 MΩ mA °C °C % % m hours 14.82oz (420g) 5.00 x 3.00 x 1.44 inches (127.0 x 76.2 x 36.6 mm) See mechanical drawing See mechanical drawing 220VAC 110VAC ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition); EN 60601-1:2006 (TUV/T-mark 3rd edition); CE B Class B Class Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 PSMBU152 SERIES 150W Medical AC/DC Open Frame Power Supplies Rev A Wall Industries, Inc. MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current Ripple & Noise Total Regulation Output Power 12 VDC 12.5A 120mVp-p 5% 150W 24 VDC 6.25A 240mVp-p 3% 150W PSMBU152-105 90 ~ 260 VAC PSMBU152-108 DERATING 120 NOTES: Output Power (%) 100 1. Operating Temperature: 0°C to +70°C 2. Derating linearly from 100% load at 50°C to 50% load at 70°C 80 60 40 20 0 0 10 20 30 40 50 60 Ambient Temperature (°C) 70 80 1.17 [29.6] MECHANICAL DRAWING M3*P0.5 MOUNTING HOLES x 2 0.21 [5.45] 1.57 [40.0] 0.80 [20.3] 1.44 [36.6] 5.00 [127.0] 4.55 [115.6] 0.06 [1.6] 0.71 [18.13] 0.22 [5.7] LED DC OUTPUT 0.76 [19.27] 2.57 [65.3] 3.00 [76.2] 1 AC INPUT P2 L 8 N G P1 PITCH = 3.96mm 0.12 [3.0] PITCH = 7.92mm Ø0.16 (Ø4) MOUNTING HOLES x 4 NOTES: 1. Unit: inches [mm] 2. Tolerance: ±0.02 [±0.5] 3. Weight: Approximately 14.82oz (420g) 4. Input Connector: Mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal 5. Output Connector: Mates with Molex housing 09-50-3081 and Molex 2478 series crimp terminal or DINKLE#DT-2GN-B01W-04P and DINKLE#ESK750V-04P 6. All dimensions are for reference only 11/18/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev A Wall Industries, Inc. PSMBU152 SERIES 150W Medical AC/DC Open Frame Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 11/18/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3