V I S H AY I N T E R T E C H N O L O G Y, I N C . TANTALUM CAPACITORS DL A 15005 Wet Tantalum Capacitors, Extended Capacitance, Tantalum Case, High-Performance, DLA Approved KEY BENEFITS • • • • • Case sizes: T1, T2, T3, T4 Capacitance: 1000 µF Voltage: 75 V Reverse voltage: 1.5 V at +85 °C Vibration capability: –– Sine: 50 g –– Random: 27.7 g • Thermal shock: 300 cycles, -55 °C to +125 °C APPLICATIONS • Avionics and aerospace systems RESOURCES • Datasheet: DLA 15005 - www.vishay.com/doc?40193 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0444-1502 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . TANTALUM CAPACITORS DL15005 A 15005 DLA www.vishay.com Vishay Wet Tantalum Capacitors, Extended Capacitance, Wet Tantalum Capacitors, Ultra-High Capacitance, Tantalum Case with Glass-to-Tantalum Hermetic Seal forDLA -55 °C to +125 °C, Tantalum Case, High-Performance, Approved DLA Approved FEATURES • Enhanced performance, high-reliability design • Terminations: axial, standard tin / lead (Sn / Pb), 100 % tin available • The 15005 tantalum case electrolytic capacitors provide all the advantages of Vishay’s SuperTan® series devices, while offering improved reverse voltage and vibration capability • Increased thermal shock capability of 300 cycles PERFORMANCE CHARACTERISTICS • Designed for avionics and aerospace applications Refer to: Typical Performance Characteristics Operating Temperature: -55 °C to +85 °C (to +125 °C with voltage derating) Capacitance Tolerance: ± 10 %, ± 20 % standard DC Leakage Current (DCL Max.): at +25 °C and above, leakage current shall not exceed the values listed in the Standard Ratings table. ORDERING INFORMATION 15005 -01 K DLA DRAWING NUMBER DASH NUMBER CAPACITANCE TOLERANCE S K = ± 10 % M = ± 20 % DLA LAND AND MARITIME COLUMBUS, OHIO S = sleeved U = unsleeved Drawing no. 15005 DIMENSIONS in inches [millimeters] Terminal welded to case 0.025 ± 0.002 (0.64 ± 0.05) 0.250 (6.35) Max. 0.094 (2.38) Max. L1 Revision 20-Jan-15 E E Terminal location within 0.031 of center “D” Dia. CASE CODE D ± 0.016 [0.41] D MAX. INSULATED (DIA.) L1 UNINSULATED +0.031 [0.79] -0.016 [0.41] E ± 0.250 [6.35] MAX. T1 0.188 [4.78] 0.219 [5.56] 0.453 [11.51] 1.500 [38.10] T2 0.281 [7.14] 0.312 [7.92] 0.641 [16.28] 2.250 [57.15] T3 0.375 [9.52] 0.406 [10.31] 0.766 [19.46] 2.250 [57.15] T4 0.375 [9.52] 0.406 [10.31] 1.062 [26.97] 2.250 [57.15] Note • Insulation sleeving will lap over the ends of the capacitor body. Revision: 20-Jan-15 Document Number: 40193 1 For technical questions, contact: 2/2 [email protected] VMN-PT0444-1502 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PRODUCT SHEET