V I S H AY I N T E R T E C H N O L O G Y, I N C . Capacitors - Max. capacitance range: 120 μF / 25 V to 10 μF / 125 V AND TEC I INNOVAT O L OGY M34 N HN TANTALUM CAPACITORS O 19 62-2012 Surface-Mount Wet Tantalum Capacitors KEY BENEFITS • • • • • Molded, surface-mount design Internal all-tantalum hermetic cell Tin/lead or 100 % tin (RoHS-compliant) terminations All axial leaded SuperTan® “T1” case size ratings Maximum capacitance range: 120 μF / 25 V to 10 μF / 125 V) APPLICATIONS • AMS (avionics, military, space) power supplies RESOURCES • Datasheet: http://www.vishay.com/doc?40106 • Wet tantalum capacitor product portfolio: http://www.vishay.com/capacitors/tantalum/ tantalum-wet/ • FIT calculator: http://www.vishay.com/capacitors/tantalum/capacitors/tantalum/ tantalum-wet/tantalum-reliability-calculator-list/ • Technical support: [email protected] • Sales contacts: http://www.vishay.com/doc?99914 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0077-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . I INNOVAT Vishay 19 62-2012 Wet Tantalum Capacitors WetSurface-Mount Tantalum Capacitors Surface Mount, Molded Case FEATURES • Terminations: standard tin/lead (SnPb), 100 % tin (RoHS compliant) terminations available • Very high capacitance, 10 µF to 470 µF 6 V to 125 V, - 55 °C to + 125 °C • Very low ESR • High ripple current capability PERFORMANCE CHARACTERISTICS • Low DCL Operating Temperature: - 55 °C to + 85 °C. (To + 125 °C with voltage derating.) • Model M34 wet tantalum electrolytic chip capacitors incorporate the advantages of all the varieties of electrolytic capacitors and eliminate most of the disadvantages. These units have a transient reverse voltage capability and a higher ripple current capability than any other electrolytic type with similar combinations of capacitance and case size. Capacitance Tolerance: At 120 Hz, + 25 °C, ± 20 % standard, ± 10 % DC Leakage Current (DCL Max.): At + 25 °C and above: Leakage current shall not exceed the values listed in the Standard Ratings Tables. • Compliant to RoHS directive 2002/95/EC APPLICATION NOTES Life Test: Capacitors are capable of withstanding a 2000 h life test at a temperature of + 85 °C or + 125 °C at the applicable rated DC working voltage. a) No continuous reverse voltage permissible. b) Transient reverse voltage surges are acceptable under the following conditions: The peak reverse voltage does not exceed 1.5 V and the peak current times the duration of the reverse transient does not exceed 0.05 As. In addition, the repetition frequency of the reverse voltage surge is less than 10 Hz. Following life test: 1. DCL, measured at + 85 °C rated voltage, shall not be in excess of the original requirement. 2. The equivalent series resistance shall not exceed 150 % of the initial requirement. 3. Change in capacitance shall not exceed 10 % from the initial measurement. c) The peak of the applied AC ripple and the applied DC voltage must not exceed the DC voltage rating of the capacitor. ORDERING INFORMATION Revision: 19-Mar-09 Capacitors - Max. capacitance range: 120 μF / 25 V to 10 μF / 125 V AND TEC O L OGY M34 M34 N HN TANTALUM CAPACITORS O M34 C 826 M 125 S L MODEL CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C TERMINATION RELIABILITY AND PACKAGING LEVEL B Z TEMP ESR See Ratings and Case Codes Table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow K = ± 10 % M = ± 20 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A = 100 % tin (RoHS compliant), bulk B = Std, tin/lead, bulk S = Std S = Std L = Low Z = Non-ER Packaging: The use of formed plastic trays for packing bulk components is standard. * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 1 PRODUCT SHEET For technical questions, contact: [email protected] 2/2 Document Number: 40106 Revision: 19-Mar-09 VMN-PT0077-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000