M35 Vishay Wet Tantalum Capacitors Surface Mount, Molded Case FEATURES • Molded surface mountable design Pb-free • Terminations: standard tin/lead (SnPb), 100 % tin (RoHS compliant) available Available RoHS* • Industry standard ratings COMPLIANT • Model M35 wet tantalum electrolytic chip capacitors incorporate the advantages of all the varieties of electrolytic capacitors and eliminate most of the disadvantages. These units have a 3 V reverse voltage capability at + 85 °C and a higher ripple current capability than any other electrolytic type with similar combinations of capacitance and case size. • Compliant to RoHS directive 2002/95/EC PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Life Test: Capacitors are capable of withstanding a 2000 h life test at a temperature of + 85 °C or + 125 °C at the applicable rated DC working voltage. Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 % standard. ± 10 %, ± 5 % available as special. Following life test: DC Leakage Current (DCL Max.): At + 25 °C and above: Leakage current shall not exceed the values listed in the Standard Ratings Tables. 1. DCL, measured at + 85 °C rated voltage, shall not be in excess of the original requirement. 2. The equivalent series resistance shall not exceed 150 % of the initial requirement. 3. Change in capacitance shall not exceed 10 % from the initial measurement. ORDERING INFORMATION M35 C 826 M 125 B Z S L MODEL CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C TERMINATION AND PACKAGING RELIABILITY LEVEL TEMP ESR See Ratings and Case Codes Table This is expressed in picofarads.The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). A = 100 % tin (RoHS compliant), bulk B = Std, tin/lead, bulk Z = Non-ER S = Std. S = Std. L = Low Packaging: The use of formed plastic trays for packing bulk components is standard. TH H TW DIMENSIONS in millimeters W L P CASE CODE L (MAX.) W H P (MIN.) TW TH (MIN.) M35 21.2 8 ± 0.3 7.5 ± 0.3 3.0 6.0 ± 0.3 1.9 * Pb containing terminations are not RoHS compliant, exemptions may apply. www.vishay.com 1 For technical questions, contact: [email protected] Document Number: 40095 Revision: 09-Sep-09 M35 Wet Tantalum Capacitors Surface Mount, Molded Case Vishay RECOMMENDED REFLOW PROFILES Tp °C tp TEMPERATURE (°C) TL °C Ts MAX. °C (tL) Ts MIN. °C PREHEAT (ts) 25 °C TIME (s) ALL CASE CODES TYPE Tp Lead (Pb) - free TP Sn/Pb tp TL Lead (Pb) - free TL Sn/Pb Ts MIN. Lead (Pb) - free Ts MIN. Sn/Pb M35 260 °C 240 °C 10 217 °C 183 °C 150 °C 100 °C Ts MAX. ts Ts MAX. Lead Lead Sn/Pb (Pb) - free (Pb) - free 200 °C 150 °C 60 to 150 ts Sn/Pb tL 60 to 90 60 MOUNTING Due to the size and weight of these capacitors, we recommend that a supplemental mounting restraint to be used in printed circuit board attachment in addition to the reflowed solder. One recommendation is to use an adhesive such as defined in the J-STD-001DS. This is the Space Application Electronic Hardware Addendum to J-STD-001 (Requirements for Solder Electrical and Electronic Assemblies). STANDARD RATINGS CAP (µF) CASE CODE 30 68 220 C C C 25 56 180 C C C 20 47 120 150 C C C C 15 33 82 100 C C C C 10 22 56 68 C C C C PART NUMBER MAX. ESR MAX. IMP. AT AT + 25 °C - 55 °C MAX. DCL (µA) AT + 25 °C + 85 °C 6 WVDC AT + 85 °C . . . 4 WVDC AT + 125 °C M35C306(1)006(2)ZS(5) 4.0 100 1.0 2.0 M35C686(1)006(2)ZS(5) 3.2 60 1.0 2.0 M35C227(1)006(2)ZS(5) 3.0 36 2.0 9.0 8 WVDC AT + 85 °C . . . 5 WVDC AT + 125 °C M35C256(1)008(2)ZS(5) 4.0 100 1.0 2.0 M35C566(1)008(2)ZS(5) 3.3 59 1.0 2.0 M35C187(1)008(2)ZS(5) 3.0 45 2.0 9.0 10 WVDC AT + 85 °C . . . 7 WVDC AT + 125 °C M35C206(1)010(2)ZS(5) 4.0 120 1.0 2.0 M35C476(1)010(2)ZS(5) 3.7 90 1.0 2.0 M35C127(1)010(2)ZS(5) 3.2 54 2.0 6.0 M35C157(1)010(2)ZS(5) 3.0 54 2.0 9.0 15 WVDC AT + 85 °C . . . 10 WVDC AT + 125 °C M35C156(1)015(2)ZS(5) 4.4 155 1.0 2.0 M35C336(1)015(2)ZS(5) 4.0 90 1.0 2.0 M35C826(1)015(2)ZS(5) 3.9 72 2.0 6.0 M35C107(1)015(2)ZS(5) 3.9 72 2.0 9.0 25 WVDC AT + 85 °C . . . 15 WVDC AT + 125 °C M35C106(1)025(2)ZS(5) 5.3 220 1.0 2.0 M35C226(1)025(2)ZS(5) 4.2 140 1.0 2.0 M35C566(1)025(2)ZS(5) 4.3 90 2.0 6.0 M35C686(1)025(2)ZS(5) 4.3 90 2.0 9.0 Document Number: 40095 Revision: 09-Sep-09 - 55 °C + 85 °C + 125 °C MAX. RIPPLE 40 kHz rms - 40 - 40 - 64 + 10.5 + 14 + 13 + 12 + 16 + 16 820 960 1000 - 40 - 40 - 60 + 10.5 + 14 + 13 + 12 + 16 + 16 820 900 1000 - 32 - 36 - 40 - 55 + 10.5 + 14 + 14 + 13 + 12 + 16 + 16 + 16 820 855 900 900 - 24 - 28 - 35 - 44 + 10.5 + 14 + 12 + 13 + 12 + 16 + 16 + 16 780 820 900 900 - 16 - 20 - 25 - 40 +8 + 10.5 + 12 + 12 +9 + 12 + 15 + 15 715 800 850 850 MAX. CAPACITANCE CHANGE (%) AT For technical questions, contact: [email protected] www.vishay.com 2 M35 Wet Tantalum Capacitors Surface Mount, Molded Case Vishay STANDARD RATINGS CAP (µF) CASE CODE 8 15 47 56 C C C C 15 39 C C 5 10 33 C C C 4 8.2 27 C C C 3.5 6.8 22 C C C 2.5 4.7 10 C C C 1.7 3.6 6.8 C C C PART NUMBER MAX. ESR MAX. IMP. AT AT + 25 °C - 55 °C MAX. DCL (µA) AT + 25 °C + 85 °C 30 WVDC AT + 85 °C . . . 20 WVDC AT + 125 °C M35C805(1)030(2)ZS(5) 6.6 275 1.0 2.0 M35C156(1)030(2)ZS(5) 6.2 175 1.0 2.0 M35C476(1)030(2)ZS(5) 5.2 100 2.0 6.0 M35C566(1)030(2)ZS(5) 5.2 100 2.0 9.0 35 WVDC AT + 85 °C . . . 22 WVDC AT + 125 °C M35C156(1)035(2)ZS(5) 6.2 175 0.75 1.5 M35C396(1)035(2)ZS(5) 4.1 61 2.0 6.0 50 WVDC AT + 85 °C . . . 30 WVDC AT + 125 °C M35C505(1)050(2)ZS(5) 8.0 400 1.0 2.0 M35C106(1)050(2)ZS(5) 6.4 250 1.0 2.0 M35C336(1)050(2)ZS(5) 5.0 135 2.0 9.0 60 WVDC AT + 85 °C . . . 40 WVDC AT + 125 °C M35C405(1)060(2)ZS(5) 9.3 550 1.0 2.0 M35C825(1)060(2)ZS(5 6.6 275 1.0 2.0 M35C276(1)060(2)ZS(5 5.0 144 3.0 12 75 WVDC AT + 85 °C . . .50 WVDC AT + 125 °C M35C355(1)075(2)ZS(5) 9.5 650 1.0 2.0 M35C685(1)075(2)ZS(5) 6.8 300 1.0 2.0 M35C226(1)075(2)ZS(5) 5.1 157 3.0 12 100 WVDC AT + 85 °C . . . 65 WVDC AT + 125 °C M35C255(1)100(2)ZS(5) 10.6 950 1.0 2.0 M35C475(1)100(2)ZS(5 8.5 500 1.0 2.0 M35C106(1)100(2)ZS(5 5.9 200 3.0 12 125 WVDC AT + 85 °C . . . 85 WVDC AT + 125 °C M35C175(1)125(2)ZS(5) 15.6 1250 1.0 2.0 M35C365(1)125(2)ZS(5) 10.0 600 1.0 2.0 M35C685(1)125(2)ZS(5) 11.7 300 3.0 12 - 55 °C + 85 °C + 125 °C MAX. RIPPLE 40 kHz rms - 16 - 20 - 23 - 38 +8 + 10.5 + 12 + 12 + 12 + 12 + 15 + 15 640 780 800 800 - 20 - 22 + 10.5 + 12 + 12 + 14 660 820 - 16 - 24 - 29 +5 +8 + 10 +6 +9 + 12 580 715 700 - 16 - 24 - 24 +5 +8 + 10 +6 +9 + 12 525 625 700 - 16 - 20 - 19 +5 +8 + 10 +6 +9 + 12 525 610 600 - 16 - 16 - 17 +7 +7 + 10 +8 +8 + 12 505 565 800 - 16 - 16 - 14 +7 +7 + 10 +8 +8 + 12 415 520 700 MAX. CAPACITANCE CHANGE (%) AT Notes 1. Capacitance tolerance: K, M 2. Termination/packaging: (see Ordering Information) 3. Reliability level: Z = Non-ER 4. Temperature: S = STD 5. ESR: S = STD, L = Low (1/2 standard ESR value) PERFORMANCE CHARACTERISTICS OF M35 CAPACITORS ELECTRICAL CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Operating temperature range Capacitor tolerance Capacitance change (maximum) ESR AC ripple current DCL (maximum leakage current) Impedance (maximum) - 55 °C to + 125 °C ± 20 %, ± 10 % at 120 Hz Reverse voltage Surge voltage Life test www.vishay.com 3 Limits per the Standard Ratings Table. Measured per requirements of MIL-PRF-39006. Reverse voltage shall be in accordance with MIL-PRF-39006/22. Units are capable of withstanding 3 V in reverse at + 85 °C for 125 h. Surge voltage shall be in accordance with MIL-PRF-39006. The DC rated surge voltage is the maximum voltage to which the capacitors should be subjected under any conditions. This includes transients and peak ripple at the highest line voltage. The surge voltage is 115 % of rated DC working voltage. The capacitors shall be capable of withstanding a 2000 h life test at 85 °C at rated voltage. For technical questions, contact: [email protected] Document Number: 40095 Revision: 09-Sep-09 M35 Wet Tantalum Capacitors Surface Mount, Molded Case Vishay ENVIRONMENTAL CHARACTERISTICS ITEM CONDITION COMMENTS Hermeticity MIL-PRF-39006 Moisture resistance MIL-PRF-39006 Altitude/barometric Pressure (reduced) MIL-PRF-39006 The internal component has been tested to be compliant to the hermeticity requirements of MIL-PRF-39006/22. The internal component has been tested to be compliant to the moisture resistance requirements of MIL-PRF-39006/22. The internal component has been tested to be compliant to the altitude or reduced barometric pressure requirements of MIL-PRF-39006/22 (150 000 feet). MECHANICAL CHARACTERISTICS ITEM CONDITION Thermal shock MIL-STD-202, Method 107, A COMMENTS Per MIL-PRF-39006, 30 cycles Shock MIL-STD-202, Method 213 Per MIL-PRF-39006, 500 g Vibration (high frequency) MIL-STD-202, Method 204 Per MIL-PRF-39006, 80 g Vibration (random) MIL-STD-202, Method 214 Per MIL-PRF-39006, 53.79 g Resistance to solder heat MIL-STD-202, Method 210 The capacitor must withstand solder dipping of the terminals at 260 °C for 10 s. The capacitor must not be visibly damaged and the electrical characteristics must not be affected. Solderability ANSI J-STD-002 The terminations must be solderable per the requirements of MIL-PRF-55365 para. 4.10 Part markings MIL-STD-1285 The part marking shall include Vishay name, trademark, capacitance, voltage, date code and lot symbol. Weight (typical) in g 3.5 PAD DIMENSIONS in inches [mm] D A C C B CASE CODE M35 A (MIN.) B (NOM.) C (NOM.) D (NOM.) C [22.7] [14.7] [4.0] [6.4] STANDARD PACKAGING QUANTITY SERIES CASE CODE M35 C Document Number: 40095 Revision: 09-Sep-09 For technical questions, contact: [email protected] www.vishay.com 4 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1