V I S H AY I N T E R T E C H N O L O G Y, I N C . TANTALUM CAPACITORS Capacitors - Maximum Performance – Maximum Safety T42 Solid Tantalum Surface-Mount Capacitors, Hi-Rel, Built-in-Fuse, Molded KEY BENEFITS • Robust design • Hi-Rel screening IAW MIL-PRF-55365 • Individually fused multiple anode construction ensures fail-safe operation and graceful degradation in the event of failure • High capacitance (up to 470 µF); high voltage (up to 75 V rated) APPLICATIONS T42 • Avionics Military Vishay•Sprague • Space apacitors T42 RESOURCES Vishay Sprague , Built in Fuse, • Datasheet: T42 - www.vishay.com/doc?40165 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see n for mission or safety critcal http://www.vishay.com/doc?99912 tors in Fuse, y design with reliability ble testing per critcal MIL-PRF-55365 on or safety Available Available Available with reliability tics: Guaranteed fuse protection at 5 A, Available r MIL-PRF-55365 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components tics are optimized to ensure activation to catastrophic failures while avoiding false anteed fuse protection at 5 SHEET A, 1/2 PRODUCT VMN-PT0403-1404 ce mount rap around SnPb,activation standard. timized to ensure to 100 % tin DOCUMENT c failures while THIS avoiding false IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 rization: For definitions of compliance .vishay.com/doc?99912 V I S H AY I N T E R T E C H N O L O G Y, I N C . TANTALUM CAPACITORS T42 T42 Vishay Sprague Solid Tantalum Surface-Mount Capacitors ®, Low Tantalum Surface-Mount Capacitors, ANTAMOUNT ESR, Hi-Rel COTS, Built-in-Fuse, TSolid Molded Hi-Rel,Leadframeless Built-in-Fuse, Molded FEATURES • Circuit protection for mission or safety critcal systems Available • High-reliability design with reliability screening available Available • Surge current testing per MIL-PRF-55365 options available • Ultra-low ESR • Fuse characteristics: guaranteed fuse protection at 5 A, 10 ms • Fuse characteristics are optimized to ensure activation to protect against catastrophic failures while avoiding false triggering • Mounting: surface-mount • Terminations: wraparound SnPb, standard. 100 % tin available • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PERFORMANCE CHARACTERISTICS Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance: 10 µF to 470 µF Capacitance Tolerance: ± 10 %, ± 20 % Voltage Rating: 16 VDC to 75 VDC Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. ORDERING INFORMATION T42 M2 227 M 025 E S A TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 °C TERMINATION/ PACKAGING (available options are series dependent) RELIABILITY LEVEL SURGE CURRENT See Ratings and Case Codes table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V) E = Sn/Pb solder/ 7" (178 mm) reel L = Sn/Pb solder/ 7" (178 mm), 1/2 reel C = 100 % tin/ 7" (178 mm), reel H = 100 % tin/ 7" (178 mm), 1/2 reel S = 40 h burn-in Z = Nonestablished reliability A = 10 cycles at +25 °C B = 10 cycles at -55 °C/ +85 °C Note • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting. Revision 03-Apr-25 Capacitors - Maximum Performance – Maximum Safety www.vishay.com DIMENSIONS in inches [millimeters] Anode termination Anode polarity bar Cathode termination W H P1 P2 P1 L CASE CODE L W H P1 P2 (REF.) M2 0.319 ± 0.008 [8.1 ± 0.2] 0.276 ± 0.008 [7.0 ± 0.2] 0.177 max. [4.5 max.] 0.060 ± 0.004 [1.5 ± 0.1] 0.207 [5.25] Revision: 25-Apr-14 Document Number: 40165 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PRODUCT SHEET 2/2 VMN-PT0403-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000