V I S H AY I N T E R T E C H N O L O G Y, I N C . Tantalum Capacitors T58 vPolyTan™ Solid Tantalum Surface-Mount Chip Capacitors, Leadframeless Molded Polymer Type KEY BENEFITS • Volumetric efficiency –– Our package offers a 10 % improvement in space utilization over competing facedown technology • Allows for higher capacitance density in our product as compared to competition • Size reductions in end product designs • Low ESR and impedance APPLICATIONS • Power conversion and distribution in hand-held consumer electronics (e.g., smartphones, phablets, tables, ultra-thin laptops) • Decoupling and bypass capacitors in audio amplifiers and pre-amplifiers RESOURCES • Datasheet: T58 - www.vishay.com/doc?40189 • For technical questions contact [email protected] • Material categorization: for definitions of compliance, please see www.vishay.com/doc?99912 A WORLD OF SOLUTIONS Product Sheet 1/2 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-PT0471-1601 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . T58 Tantalum Capacitors Vishay www.vishay.com T58 TM Solid Tantalum Surface Mount Chip Capacitors,T58 vPolyTan www.vishay.com Vishay Leadframeless Molded Polymer Type vPolyTan™ Solid Tantalum Chip Capacitors, Capacitors, FEATURES vPolyTanTM Solid TantalumSurface-Mount Surface Mount Chip • Low ESR Leadframeless Molded Polymer Type Leadframeless Molded Polymer Type • Molded case available in eight case codes PERFORMANCE / ELECTRICAL CHARACTERISTICS Operating Temperature: -55 °C to +105 °C (above 85 °C, voltage derating is required) Capacitance Range:/10 μF to 330 μF PERFORMANCE ELECTRICAL Capacitance Tolerance: ± 20 % CHARACTERISTICS Voltage Rating: 4 VDC to 25 Operating Temperature: -55V°C DC to +105 °C (above 85 °C, voltage derating is required) Capacitance Range: 10 μF to 330 μF Capacitance Tolerance: ± 20 % ORDERING INFORMATION Voltage Rating: 4 VDC to 25 VDC including 0603 and 0805 footprints •FEATURES Lead (Pb)-free L-shaped face-down terminations •8 mm tape and reel packaging available per Low ESR standard • EIA-481 Molded case available in eight case codes • Moisture level 3footprints including sensitivity 0603 and 0805 • Material categorization: Lead (Pb)-free L-shaped face-down terminations definitions please see • for 8 mm tape and of reelcompliance packaging available per www.vishay.com/doc?99912 EIA-481 standard • Moisture sensitivity level 3 •APPLICATIONS Material categorization: • for Decoupling, smoothing, filtering definitions of compliance please see • www.vishay.com/doc?99912 Bulk energy storage in wireless cards • Infrastructure equipment APPLICATIONS • Storage and networking Decoupling, smoothing, filtering • Computer motherboards Bulk energy storage in wireless cards • Smartphones and tablets • Infrastructure equipment • Storage and networking • Computer motherboards 6R3 0300 • Smartphones and tablets C T58 MM 106 M TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 °C TERMINATION / PACKAGING ESR See MM Ratings CASE and CODE Case Codes table. See Ratings and Case Codes table. This is expressed in 106 picofarads. The first CAPACITANCE two digits are the significant figures. The third is the number of zerosin This is expressed to follow. picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. M = ±M20 % This is 6R3 expressed in volts. To DC VOLTAGE complete the RATING AT block, +85 °C three-digit zeros precede the voltage rating. This is expressed A decimal in volts.point To is indicated by an complete the“R” (6R3 = 6.3 V) three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V) C = leadC(Pb)-free solderable coating, TERMINATION / 7" reel PACKAGING Maximum 0300 100 kHz ESR inESR m C = lead (Pb)-free solderable coating, 7" reel Maximum 100 kHz ESR in m ORDERING INFORMATION T58 TYPE CAPACITANCE TOLERANCE M = ± 20 % DIMENSIONS in inches [millimeters] Anode Termination Anode Polarity Bar DIMENSIONS in inches [millimeters] W C H Anode Termination P1 EIA SIZE P1 Anode Polarity Bar Cathode Termination L W H H (MAX.) L W P1 P2 (REF.) C 0.035 0.063 ± 0.008 0.033 ± 0.008 0.020 ± 0.004 0.024 0.024 ± 0.004 MM 1608-09 [0.9] [1.6 ± 0.2] [0.85 ± 0.2] [0.5 ± 0.1] [0.6] [0.6 ± 0.1] P1 P2 P1 0.039 0.063 ± 0.008 0.033 ± 0.008L 0.020 ± 0.004 0.024 0.024 ± 0.004 M0 1608-10 [1.0] [1.6 ± 0.2] [0.85 ± 0.2] [0.5 ± 0.1] [0.6] [0.6 ± 0.1] CASE CODE EIA SIZE H 0.035 (MAX.) L 0.008 P20.039 (REF.) 0.079 ± 0.049 W ± 0.008 0.020P1 ± 0.004 0.035 C ± 0.004 W9 2012-09 [0.9] [2.0 ± 0.2] [1.25±±0.008 0.2] [0.5 ± 0.1] [1.0] [0.9 ± 0.1] 0.035 0.063 0.008 0.033 0.020 0.004 0.024 0.024 0.004 MM 1608-09 [0.9] [1.6 ± 0.2] [0.85±±0.008 0.2] [0.5 ± 0.1] [0.6] [0.6 ± 0.1] 0.035 0.079 0.008 0.049 0.020 0.004 0.039 0.035 0.004 W0 2012-09 [0.9] [2.0 ± 0.2] [1.25±±0.008 0.2] [0.5 ± 0.1] [1.0] [0.9 ± 0.1] 0.039 0.063 0.008 0.033 0.020 0.004 0.024 0.024 0.004 M0 1608-10 [1.0] [1.6 ± 0.2] [0.85±±0.008 0.2] [0.5 ± 0.1] [0.6] [0.6 ± 0.1] 0.039 0.126 0.008 0.063 0.031 0.004 0.063 0.047 0.004 A0 3216-10 [1.0] [3.2 ± 0.2] [1.6 ± 0.008 0.2] [0.8 ± 0.1] [1.6] [1.2 ± 0.1] 0.035 0.079 0.008 0.049 0.020 0.004 0.039 0.035 0.004 W9 2012-09 [0.9] [2.0 ± 0.2] [1.25±±0.008 0.2] [0.5 ± 0.1] [1.0] [0.9 ± 0.1] 0.071 0.126 0.008 0.063 0.031 0.004 0.063 0.047 0.004 AA 3216-18 [1.8] [3.2 ± 0.2] [1.6 ± 0.008 0.2] [0.8 ± 0.1] [1.6] [1.2 ± 0.1] 0.035 0.079 0.008 0.049 0.020 0.004 0.039 0.035 0.004 W0 2012-09 [0.9] [2.0 ± 0.2] [1.25±±0.008 0.2] [0.5 ± 0.1] [1.0] [0.9 ± 0.1] 0.039 0.138 0.008 0.110 0.031 0.008 0.077 0.094 0.004 B0 3528-10 [1.0] [3.5 ± 0.2] [2.8 ± 0.2] [0.8 ± 0.2] [1.95] [2.4 ± 0.1] 0.039 0.126 0.008 0.063 0.008 0.031 0.004 0.063 0.047 0.004 A0 3216-10 [1.0] [3.2 ± 0.2] [1.6 ± 0.2] [0.8 ± 0.1] [1.6] [1.2 ± 0.1] 0.094 0.004 0.079 0.138 0.008 0.110 0.008 0.031 0.008 0.077 BB 3528-20 [2.4 ± 0.004 0.1] [2.0] [3.5 ± 0.2] [2.8 ± 0.008 0.2] [0.8 ± 0.2] [1.95] 0.071 0.126 0.008 0.063 0.031 0.004 0.063 0.047 AA 3216-18 [1.8] [3.2 ± 0.2] [1.6 ± 0.2] [0.8 ± 0.1] [1.6] [1.2 ± 0.1] 0.039 0.138 ± 0.008 0.110 ± 0.008 0.031 ± 0.008 0.077 ± 0.004 B016-Dec-15 3528-10 Revision: Document 0.094 Number: 40189 [1.0] [3.5 ± 0.2] 1 [2.8 ± 0.2] [0.8 ± 0.2] [1.95] [2.4 ± 0.1] For technical questions, contact: [email protected] 0.094 ± 0.004 0.079 0.138 ± 0.008 0.110 ± 0.008 0.031 ± 0.008 0.077 BB 3528-20 [2.4 ± 0.1] [2.0] [3.5 ± NOTICE. 0.2] [2.8 ± 0.2] [0.8 ± 0.2] HEREIN AND [1.95]THIS DOCUMENT THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT THE PRODUCTS DESCRIBED ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Document Number: 40189 ProductRevision: Sheet16-Dec-15 2/21 VMN-PT0471-1601 For technical questions, contact: [email protected] THIS IS SUBJECT CHANGENOTICE. WITHOUT NOTICE. THE PRODUCTS DESCRIBED THIS DOCUMENT IS DOCUMENT SUBJECT TO CHANGE TO WITHOUT THE PRODUCTS DESCRIBED HEREIN HEREIN AND AND THIS DOCUMENT SUBJECT DISCLAIMERS, TO SPECIFIC DISCLAIMERS, FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT ARE SUBJECT ARE TO SPECIFIC SET FORTH SET AT www.vishay.com/doc?91000 www.vishay.com Revision 16-Dec-15 CASE CODE P2 C Cathode Termination