Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Sx02xS Series RoHS Description New 1.5 Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR’s junctions are glasspassivated to ensure long term reliability and parametric stability. Features • RoHS compliant and Halogen-Free • High dv/dt noise immunity • Improved turn-off time (tq) < 35 μsec. • Thru hole and surface mount packages Main Features Symbol IT(RMS) VDRM / VRRM IGT • Sensitive gate for direct microprocessor interface • Surge capability > 15Amps Value Unit 1.5 A 400 to 600 V 200 µA • Blocking voltage (VDRM / VRRM ) capability — up to 600V Schematic Symbol A Applications The Sx02xS EV series is specifically designed for Gas Ignition applications that require high pulse surge current capability. G K Absolute Maximum Ratings Symbol Parameter IT(RMS) RMS on-state current (full sine wave) IT(AV) Average on-state current ITSM Non repetitive surge peak on-state current (Single cycle, TJ initial = 25°C) I2t I2t Value for fusing di/dt IGM PG(AV) Tstg TJ TO-92 TC = 65°C SOT-223 TL = 95°C TO-92 TC = 65°C SOT-223 TC = 95°C Value Unit 1.5 A 0.95 A F = 50 Hz 12.5 F = 60 Hz 15.0 tp = 10 ms F = 50 Hz 0.78 tp = 8.3 ms F = 60 Hz 0.93 Critical rate of rise of on-state current IG = 10mA TO-92 SOT-223 TJ = 125°C 50 A/μs Peak gate current tp = 10 μs TJ = 125°C 1.0 A TJ = 125°C 0.1 W Storage junction temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C Average gate power dissipation © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 TO-92 SOT-223 A A2s Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Description Test Conditions IGT DC Gate Trigger Current VGT Sx02xS Unit Min Max VD = 12V; RL = 60 Ω 15 200 µA DC Gate Trigger Voltage VD = 12V; RL = 60 Ω — 0.8 V Peak Reverse Gate Voltage IRG = 10μA 5 — V Holding Current RGK = 1 kΩ — 5 mA Critical Rate-of-Rise of Off-State Voltage TJ = 125°C VD = VDRM / VRRM Exponential Waveform RGK = 1 kΩ 25 — V/μs tq Turn-Off Time TJ = 125°C @ 600 V RGK = 1 kΩ — 35 μs tgt Turn-On Time IG = 10mA PW = 15μsec IT = 3.0A (pk) — 3 μs VGRM IH (dv/dt)s Static Characteristics (TJ = 25°C, unless otherwise specified) Symbol VTM IDRM Description Test Conditions Peak On-State Voltage Off-State Current, Peak Repetitive Value Unit Min Max ITM = 3.0A (pk) — 1.70 V TJ = 25°C @ VD= VDRM RGK = 1 kΩ — 5 μA TJ = 125°C @ VD= VDRM RGK = 1 kΩ — 500 μA Thermal Resistances Symbol 1 Parameter Rθ(J-C) Junction to case (AC) Rθ(J-A) Junction to ambient Value T = 1.5A (RMS)1 IT = 1.5A (RMS)1 TO-92 50 SOT-223 25 TO-92 160 SOT-223 60 Unit °C/W °C/W 60Hz AC resistive load condition, 100% conduction. Additional Information Datasheet Resources Samples © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: N ormalized DC Holding Current vs. Junction Temperature Normalized Gate: Trigger Current IGT @ Tj / IGT@ 25ºC 2.5 2.0 Normalized Holding Current (IH @ TJ / IH @25∞C) 2.0 1.5 1.0 0.5 1.5 1.0 0.5 0.0 0.0 -40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 -40 +125 -25 -10 +5 Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature Instantaneous On-state Current (IT) – Amps (VGT @ Tj / VGT @ 25ºC) Normalized Gate: Trigger Voltage 1.0 0.5 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 +110 +125 8 6 4 2 0.8 Max Allowable Case Temperature, TC (Celsius) Average Power Dissipation, PD (Watts) 1.0 0.5 0.0 © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 +95 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Figure 6: M aximum Allowable Case Temperature vs. On-State Current CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o RMS On-state Current [IT(RMS)] (Amps) +80 Instantaneous On-state Voltage (VT) – Volts 1.5 1.0 +65 0 +125 Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 0.5 +50 10 Junction Temperature (TJ) °C 0.0 +35 Figure 4: O n-State Current vs. On-State Voltage (Typical) 1.5 -40 +20 Junction Temperature (TJ) °C Junction Temperature (TJ) °C 1.5 130 120 SOT-223 110 100 TO-92 90 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o CASE TEMPERATURE: Measured as shown on dimensional drawings 70 60 50 0.0 0.5 1.0 RMS On-state Current [IT (RMS)] (Amps) 1.5 Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Figure 7: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-State Current (ITSM) – Amps. 20 Supply Frequency: 60Hz Sinusoidal Load: Resistive RMS On-State Current [IT(RMS)]: Max Rated Value at Specific Case Temperature 15 12 10 9 8 7 6 Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 5 1.5 4 AD evic es 3 2 1 1 2 3 4 5 6 7 8 9 10 20 30 40 60 80 100 200 300 400 600 1000 Surge Current Duration – Full Cycle Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 Ramp-do Ramp-down tS time to peak temperature Time © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Physical Specifications Environmental Specifications Terminal Finish 100% Matte Tin-plated. Body Material UL recognized epoxy meeting flammability classification 94V-0. Test Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours Temperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time Temperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High Temp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-Temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Copper Alloy Lead Material Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Dimensions — TO-92 (E Package) A TC MEASURING POINT B SEATING PLANE C GATE ANODE G CATHODE H I D F J F © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 E Dimensions Inches Millimeters Min Max Min Max A 0.175 0.205 4.450 5.200 B 0.170 0.210 4.320 5.330 C 0.500 — 12.700 — D 0.135 — 3.430 — E 0.125 0.165 3.180 4.190 F 0.080 0.105 2.040 2.660 G 0.016 0.021 0.407 0.533 H 0.045 0.055 1.150 1.390 I 0.095 0.105 2.420 2.660 J 0.015 0.020 0.380 0.500 Anode Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs Anode Gate Cathode Dimensions – SOT-223 Anode Anode Anode Gate Cathode Anode Gate Cathode Anode Gate Cathode Anode Dimensions Pad Layout for SOT-223 3.3 (0.130”) 1.5 (0.059”) 1.2 (0.047”) 6.4 (0.252”) 2.3 (0.091”) (3x) 1.5 (0.059”) 4.6 (0.181”) Millimeters Min Typ Max Min Typ Max A 0.248 0.256 0.264 6.30 6.50 6.70 B 0.130 0.138 0.146 3.30 3.50 3.70 C — — 0.071 — — 1.80 D 0.001 — 0.004 0.02 — 0.10 E 0.114 0.118 0.124 2.90 3.00 3.15 F 0.024 0.027 0.034 0.60 0.70 0.85 G — 0.090 — — 2.30 — H — 0.181 — — 4.60 — I 0.264 0.276 0.287 6.70 7.00 7.30 J 0.009 0.010 0.014 0.24 0.26 0.35 Dimensions in Millimeters (Inches) Recommended Soldering Footprint for SOT223 Inches K 10° MAX Product Selector Voltage Part Number Gate Sensitivity Package — 200µA TO-92 — X 200µA TO-92 S402TS X — 200µA SOT-223 S602TS — X 200µA SOT-223 400V 600V S402ES X S602ES Packing Options Part Number Marking Weight Packing Mode Base Quantity Sx02ES Sx02ES 0.217 g Bulk 2500 Sx02ESAP Sx02ES 0.217 g Ammo Pack 2000 Sx02ESRP Sx02ES 0.217 g Tape & Reel 2000 Sx02TSRP Sx02TS 0.120 g Tape & Reel 1000 Note: x = voltage © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications Meets all EIA-468-C Standards 1.6 (41.0) 0.02 (0.5) 0.236 (6.0) 0.708 (18.0) 0.098 (2.5) MAX 1.26 (32.0) 0.354 (9.0) 0.5 (12.7) 0.1 (2.54) Anode Cathode 0.2 (5.08) Gate 0.157 DIA (4.0) 14.17(360.0) Flat up 1.97 (50.0) Dimensions are in inches (and millimeters). Direction of Feed TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications Meets all EIA-468-C Standards 0.236 (6.0) 1.62 (41.2) 0.708 (18.0) 0.02 (0.5) 0.098 (2.5) MAX 1.27 (32.2) 0.354 (9.0) 0.1 (2.54) 0.5 (12.7) Anode 0.2 (5.08) 0.157 (4.0) DIA Cathode Gate Flat down ed n of Fe Directio 25 Devices per fold 1.85 (47.0) 12.2 (310.0) 1.85 (47.0) 13.3 (338.0) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 Dimensions are in inches (and millimeters). Teccor® brand Thyristors EV Series 1.5 Amp Sensitive SCRs SOT-223 Reel Pack (RP) Specifications 8 mm 4 mm 1.5 mm 2 mm A 1.75 mm 12 mm 5.5 mm K A GATE 180 mm 13 mm Abor Hole Diameter 13.4 mm Part Marking System Part Numbering System S x 02 x xx xx SCR SERIES PACKING TYPE Blank: Bulk RP: Reel Pack (TO-92) : Embossed Carrier Pack (SOT-223) AP: Ammo Pack (TO-92) VOLTAGE 4: 400V 6: 600V CURRENT 02: 1.5A SENSITIVITY S: 200µA Sensitive SCR PACKAGE TYPE E: TO-92 T: SOT-223 SOT223 TO92 Line1 = Littelfuse Part Number Line2 = continuation…Littelfuse Part Number Y = Last Digit of Calendar Year M = Letter Month Code (A-L for Jan-Dec) L = Location Code DD = Calendar Date © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16