R75 2 R75 L

R75 2 - R75 L
MKP Series
metallized polyPROPYLENE film
capacitor
Typical applications: This special release is specifically
designed for application in series with the main (Capacitive
power supply), with particular protection against severe
ambient conditions.
BEST FITTING COMPONENTS IN TERMS
OF BOTH SIZE & PERFORMANCES
PRODUCT CODE: R752 (Digit 12: 0 to 9)
R75L Digit 12: 0 to 9)
15≤p≤27.5
0.8
Ød±0.05
p = 37.5
1.0
All dimensions are in mm.
Product code system
The part number, comprising 14 digits, is formed as follows:
1
2
3
4
5
6
7
8
9
10 11
12
R 7 5
13
Pitch
(mm)
Box thickness
(mm)
15.0
15.0
22.5
27.5
37.5
<7.5
≥7.5
All
All
All
14
-
(mm)
AMMO-PACK
AMMO-PACK
REEL Ø 355mm
REEL Ø 500mm
REEL Ø 500mm
Loose, short leads
Loose, long leads
(p≥15mm)
Taping style
P2
(mm)
12.70
19.05
12.70
12.70
19.05
Fig.
(No.)
2
3
2
2
3
Ordering
code
(Digit 10
to 11)
DQ
DQ
GY
CK
CK
AA
40
50
Pitch
(mm)
15.0
22.5
15.0
15.0
22.5/27.5
04+2
30+5
25+2/-1
Note: Ammo-pack is the preferred packaging for taped version.
09/2008
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
Winding scheme
Table 1
Lead
length
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
GENERAL TECHNICAL DAta
Dielectric: polypropylene film.
Plates: aluminium layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads:
tinned wire.
Protection:plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to UL94 V0.
Marking: manufacturer’s logo, series (R75), dielectric code (MKP), capacitance, tolerance, A.C. rated voltage, manufacturing date code.
Climatic category: 55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Related documents:IEC 60384-16
Digit 1 to 3 Series code.
Digit 4 a.c. rated voltage:
2 = 230V L= 250V
Digit 5 Pitch:
I=15mm;
N= 22.5.mm;
R=27.5mm;
W=37.5mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identifies the dimensions and electrical characteristics (0 to 9).
Digit 13 Internal use.
Digit 14 Capacitance tolerance: K=10%; M=20%
Tolerance ± 5% (J) available upon request
Standard
packaging style
Maximum dimensions (mm)
B max
H max
L max
182
single sided metallized
polypropylene film
R75 2 - R75 L
MKP Series
metallized polyPROPYLENE film
capacitor
PRODUCT CODE: R752 (Digit 12: 0 to 9)
R75L (Digit 12: 0 to 9)
Rated
Cap.
0.033
0.100
0.082
0.10
0.15
0.18
0.22
0.27
0.33
0.47
0.27
0.33
0.47
0.56
0.68
0.82
1.0
1.5
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
230Vac / 400Vdc*
Std dimensions
B
H
L
p
4.0 9.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
8.5 14.5 18.0 15.0
10.0 16.0 18.0 15.0
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
8.5 17.0 26.5 22.5
10.0 18.5 26.5 22.5
10.0 18.5 26.5 22.5
11.0 20.0 26.5 22.5
13.0 22.0 26.5 22.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
11.0 20.0 32.0 27.5
11.0 20.0 32.0 27.5
13.0 22.0 32.0 27.5
13.0 22.0 32.0 27.5
14.0 28.0 32.0 27.5
18.0 33.0 32.0 27.5
18.0 33.0 32.0 27.5
18.0 33.0 32.0 27.5
22.0 37.0 32.0 27.5
11.0 22.0 41.5 37.5
13.0 24.0 41.5 37.5
13.0 24.0 41.5 37.5
16.0 28.5 41.5 37.5
16.0 28.5 41.5 37.5
19.0 32.0 41.5 37.5
19.0 32.0 41.5 37.5
20.0 40.0 41.5 37.5
Max
dv/dt
(V/µs)
1000
1000
700
700
700
700
700
700
700
700
250
250
250
250
250
250
250
250
130
130
130
130
130
130
130
130
130
130
130
130
130
70
70
70
70
70
70
70
70
Max K0
(V2/µs)
800 E3
800 E3
560 E3
560 E3
560 E3
560 E3
560 E3
560 E3
560 E3
560 E3
200 E3
200 E3
200 E3
200 E3
200 E3
200 E3
200 E3
200 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
104 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
56 E3
Mechanical version and packaging (Table1)
Internal use
Tolerance: K (±10%); M (±20%)
All dimensions are in mm
Rated
Cap.
Part Number
R752F 2330--0-R752F 3100--0-R752I 2820--0-R752I 3100--0-R752I 3150--0-R752I 3180--0-R752I 3220--0-R752I 3270--0-R752I 3330--0-R752I 3470--0-R752N3270--0-R752N3330--0-R752N3470--0-R752N3560--0-R752N3680--0-R752N3820--0-R752N4100--0-R752N4150--0-R752R3470--0-R752R3560--0-R752R3680--0-R752R3820--0-R752R 4100--0-R752R 4120--0-R752R 4150--0-R752R 4180--0-R752R 4220--0-R752R 4270--0-R752R 4330--0-R752R 4390--0-R752R 4470--0-R752W4180--0-R752W4220--0-R752W4270--0-R752W4330--0-R752W4390--0-R752W4470--0-R752W4560--0-R752W4680--0--
0.010
0.015
0.022
0.033
0.047
0.068
0.056
0.068
0.082
0.10
0.15
0.18
0.22
0.27
0.33
0.22
0.27
0.33
0.47
0.56
0.68
0.82
1.0
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
250Vac / 560Vdc*
Std dimensions
B
H
L
p
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
10.0 16.0 18.0 15.0
10.0 16.0 18.0 15.0
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
8.5 17.0 26.5 22.5
10.0 18.5 26.5 22.5
11.0 20.0 26.5 22.5
11.0 20.0 26.5 22.5
13.0 22.0 26.5 22.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
11.0 20.0 32.0 27.5
11.0 20.0 32.0 27.5
13.0 22.0 32.0 27.5
13.0 22.0 32.0 27.5
13.0 25.0 32.0 27.5
18.0 33.0 32.0 27.5
18.0 33.0 32.0 27.5
18.0 33.0 32.0 27.5
22.0 37.0 32.0 27.5
22.0 37.0 32.0 27.5
11.0 22.0 41.5 37.5
13.0 24.0 41.5 37.5
13.0 24.0 41.5 37.5
16.0 28.5 41.5 37.5
16.0 28.5 41.5 37.5
19.0 32.0 41.5 37.5
19.0 32.0 41.5 37.5
20.0 40.0 41.5 37.5
20.0 40.0 41.5 37.5
24.0 44.0 41.5 37.5
24.0 44.0 41.5 37.5
30.0 45.0 41.5 37.5
Max
dv/dt
(V/µs)
1500
1500
1500
1500
1500
1500
900
900
900
900
900
900
900
900
900
300
300
300
300
300
300
300
300
150
150
150
150
150
150
150
150
150
150
150
150
150
150
90
90
90
90
90
90
90
90
90
90
90
90
Max K0
Part Number
(V2/µs)
168 E4
168 E4
168 E4
168 E4
168 E4
168 E4
101 E4
101 E4
101 E4
101 E4
101 E4
101 E4
101 E4
101 E4
101 E4
336 E3
336 E3
336 E3
336 E3
336 E3
336 E3
336 E3
336 E3
168 E3
168 E3
168 E3
168 E3
168 E3
168 E3
168 E3
168 E3
168 E3
168 E3
168 E3
168 E3
168 E3
168 E3
101 E3
101 E3
101 E3
101 E3
101 E3
101 E3
101 E3
101 E3
101 E3
101 E3
101 E3
101 E3
R75LF 2100--0-R75LF 2150--0-R75LF 2220--0-R75LF 2330--0-R75LF 2470--0-R75LF 2680--0-R75LI 2560--0-R75LI 2680--0-R75LI 2820--0-R75LI 3100--0-R75LI 3150--0-R75LI 3180--0-R75LI 3220--0-R75LI 3270--0-R75LI 3330--0-R75LN3220--0-R75LN3270--0-R75LN3330--0-R75LN3470--0-R75LN3560--0-R75LN3680--0-R75LN3820--0-R75LN4100--0-R75LR3330--0-R75LR3390--0-R75LR3470--0-R75LR3560--0-R75LR 3680--0-R75LR 3820--0-R75LR 4100--0-R75LR 4120--0-R75LR 4150--0-R75LR 4180--0-R75LR 4220--0-R75LR 4270--0-R75LR 4330--0-R75LR4390--0-R75LW4120--0-R75LW4150--0-R75LW4180--0-R75LW4220--0-R75LW4270--0-R75LW4330--0-R75LW4390--0-R75LW4470--0-R75LW4560--0-R75LW4680--0-R75LW 4820--0-R75LW 5100--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: K (±10%); M (±20%)
E12 Series available upon request
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
*Not suitable for EMI filtering applications.
183
09/2008
R75 2 - R75 L
MKP Series
metallized polyPROPYLENE film
capacitor
PRODUCT CODE: R752 (Digit 12: 0 to 9)
R75L (Digit 12: 0 to 9)
test method and performance
electrical characteristics
Rated voltage (VR): 230Vac (400Vdc) - 250Vac (560Vdc)
Rated temperature (TR):+85°C
Temperature derated voltage:
The following decreasing factor has to be applied on
the rated voltage:
+85°C to +105°C: 2.00% per °C for VR (d.c.)
+85°C to +105°C: 0.5% per °C for VR (a.c.)
Capacitance range: 0.056 µF to 10 µF.
Capacitance values:
E12 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Total self-inductance (L): (Lead length ~2 mm)
Pitch (mm)
L (nH) ≈
15
10
22.5
18
27.5
18
37.5
20
C≤0.1µF
≤04
≤06
≤25
0.1<C≤1.0µF
≤5
≤8
1<C≤3.3µF
≤6
Test conditions 1st
Temperature:
Relative humidity (RH):
Test duration:
+40°C±2°C
93% ±2%
56 days
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ):
≤10x10-4 at 1kHz
Insulation resistance:
≥50% of initial limit.
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
Voltage applied:
+40°C±2°C
93% ±2%
56 days
VR
Performance
Dissipation factor (DF):
tgδx10-4 at +25°C±5°C
kHz
1
10
100
Damp heat, steady state:
3.3<C≤10µF
≤10
Insulation resistance:
Test conditions
Temperature:
+25±C°5°C
Voltage charge time: 1min
100Vdc
Voltage charge:
Performance
≥1x105 MΩfor C≤0.33µF (5x105 MΩ)*
≥30000 s for C >0.33µF (150000 s)*
* Typical value.
Test voltage between terminations:
1.6xVR applied for 2 s at +25°C±5°C
Surge test:
1500 Vpk (10 pulses) for 230Vac
1700 Vpk (10 pulses) for 250Vac
Capacitance change |∆C/C|: ≤5%
≤10x10-4 at 1kHz
DF change (∆tgδ):
Insulation resistance:
≥50% of initial limit.
Test conditions 3rd
Temperature:
Relative humidity (RH):
Test duration:
Voltage applied:
+85°C±2°C
85% ±2%
250 h
VR
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ):
≤10x10-4 at 1kHz
≥50% of initial limit.
Insulation resistance:
Endurance:
Test conditions
Temperature:
Test duration:
Voltage applied:
+85°C±2°C
2000 h
1.25xVR
Performance
Capacitance change |∆C/C|: ≤5%
≤10x10-4 at 10kHz for C≤1µF
DF change (∆tgδ):
≤10x10-4 at 01kHz for C>1µF
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature:
+260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation,
ou=Marketing Communications, cn=Marcy Brand,
[email protected]
Date: 2012.07.10 15:13:25 -04'00'
Capacitance change |∆C/C|: ≤1%
≤10x10-4 at 10kHz for C≤1µF
DF change (∆tgδ):
≤10x10-4 at 01kHz for C>1µF
≥initial limit.
Insulation resistance:
Long term stability (after two years):
Storage: standard environmental conditions (see page 12
of DC film capacitors catalogue)
Performance
Capacitance change |∆C/C|: ≤0.5%
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.