KEMET R76QI2330XX7XX

R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
Loose
Typical applications: deflection circuits in TV-sets (Scorrection and fly-back tuning) and monitors, switching
spikes suppression in SMPS, lamp capacitor for electronic
ballast and compact lamps, snubber and SCR
commutating circuits, applications with high voltage and high
current.
Taped
PRODUCT CODE: R76
B
Ød±0.05
p = 7.5
≤3,5 >3,5
0.5
0.6
p =10
all
0.6
15 ≤ p ≤27.5
all
0.8
p = 37.5
all
1.0
All dimensions are in mm.
Pitch
(mm)
Box thickness
(mm)
7.5
10.0
15.0
15.0
22.5
27.5
37.5
All
All
<7.5
≥7.5
All
All
All
Maximum dimensions (mm)
B max
H max
L max
B +0.1
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
Product code system
GENERAL TECHNICAL DATA
The part number, comprising 14 digits, is formed as follows:
Dielectric: polypropylene film.
double sided metallized polyester film.
Plates:
Winding: non-inductive type.
1
2
3
4
5
6
7
8
9
10 11
12
13
R 7 6
14
-
Leads:
Digit 1 to 3 Series code.
Digit 4 d.c. rated voltage:
I = 250V M = 400V P = 630V
Q= 1000V T =1600V U = 2000V
Digit 5 Pitch:
D=7.5 mm; F=10mm; I=15mm; N=22.5mm; R=27.5mm; W=37.5mm.
Digit 6 to 9
Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF.
for Ø ≥ 0,6mm : tinned wire
for Ø = 0,5mm : tinned wire, low thermical conductivity
Protection:plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to UL94 V0.
Marking: manufacturer’s logo, series (R76), dielectric code (MKP), capacitance, tolerance, D.C. rated voltage, manufacturing date code.
Climatic category:55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Related documents: IEC 60384-16
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identifies the dimensions and electrical characteristics.
Digit 13 Internal use.
Digit 14 Capacitance tolerance:
H=2.5%; J=5%; K=10%
Table 1 (for more detailed information, please refer to pages 14).
Standard
packaging style
Lead length
(mm)
AMMO-PACK
AMMO-PACK
AMMO-PACK
REEL Ø 355mm
REEL Ø 355mm
REEL Ø 500mm
REEL Ø 500mm
Loose, short leads
Loose, long leads
(p<10mm)
Loose, long leads
(p10mm)
Loose, long leads
(p≥15mm)
Taping style
P2
(mm)
06.35
12.70
19.05
06.35
12.70
12.70
19.05
Fig.
(No.)
1
2
3
1
2
2
3
Ordering code
Pitch
(mm)
7.5
10.0/15.0
22.5
7.5
10.0/15.0
10.0/15.0
22.5/27.5
(Digit 10 to 11)
04+2
DQ
DQ
DQ
CK
GY
CK
CK
SE
17+1/-2
Z3
18+1/-1
JM
30
25+2/-1
40
50
+5
Note: Ammo-pack is the preferred packaging for taped version
09/2008
L +0.2
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
116
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
double sided metallized
polyester carrier film
polypropylene film
dielectric
1 section
(250Vdc)
6800 pF
B
3.0
H
L
8.0 10.0
p
7.5
Max
dv/dt
(V/µs)
1100
8200 pF
3.0
8.0 10.0
7.5
1100
55 E4
0.010 µF
3.0
8.0 10.0
7.5
1100
55 E4
0.012 µF
4.0
9.0 10.0
7.5
1100
55 E4
0.015 µF
4.0
9.0 10.0
7.5
1100
55 E4
0.018 µF
4.0
9.0 10.0
7.5
1100
55 E4
0.022 µF
4.0
9.0 10.0
7.5
1100
55 E4
0.027 µF
5.0 10.5 10.0
7.5
1100
55 E4
0.033 µF
5.0 10.5 10.0
7.5
1100
55 E4
0.039 µF
6.0 12.0 10.5
7.5
1100
55 E4
0.047 µF
6.0 12.0 10.5
7.5
1100
55 E4
0.027 µF
4.0
9.0 13.0 10.0
1000
50 E4
0.033 µF
4.0
9.0 13.0 10.0
1000
50 E4
0.039 µF
4.0
9.0 13.0 10.0
1000
50 E4
0.047 µF
5.0 11.0 13.0 10.0
1000
50 E4
0.056 µF
5.0 11.0 13.0 10.0
1000
50 E4
0.068 µF
6.0 12.0 13.0 10.0
1000
50 E4
0.082 µF
6.0 12.0 13.0 10.0
1000
50 E4
0.068 µF
5.0 11.0 18.0 15.0
550
28 E4
0.082 µF
5.0 11.0 18.0 15.0
550
28 E4
0.10
µF
5.0 11.0 18.0 15.0
550
28 E4
0.12
µF
6.0 12.0 18.0 15.0
550
28 E4
0.15
µF
6.0 12.0 18.0 15.0
550
28 E4
0.18
µF
7.5 13.5 18.0 15.0
550
28 E4
0.18
µF
9.0 12.5 18.0 15.0
550
28 E4
0.22
µF
7.5 13.5 18.0 15.0
550
28 E4
0.22
µF
9.0 12.5 18.0 15.0
550
28 E4
0.27
µF
8.5 14.5 18.0 15.0
550
28 E4
0.27
µF
9.0 12.5 18.0 15.0
550
28 E4
0.33
µF 10.0 16.0 18.0 15.0
550
28 E4
0.33
µF 13.0 12.0 18.0 15.0
550
28 E4
0.39
µF 10.0 16.0 18.0 15.0
550
28 E4
Rated
Cap.
0.47
250Vdc / 180Vac
Std dimensions
µF 11.0 19.0 18.0 15.0
550
Max K0
(V /µs)
55 E4
B
H
L
p
6.0 15.0 26.5 22.5
0.27 µF
6.0 15.0 26.5 22.5
250
13 E4
0.33 µF
6.0 15.0 26.5 22.5
250
13 E4
0.39 µF
7.0 16.0 26.5 22.5
250
13 E4
0.47 µF
7.0 16.0 26.5 22.5
250
13 E4
0.56 µF
8.5 17.0 26.5 22.5
250
13 E4
0.68 µF 10.0 18.5 26.5 22.5
250
13 E4
R76ID2270--4--
0.82 µF 10.0 18.5 26.5 22.5
250
13 E4
R76ID2330--4--
1.0
µF
11.0 20.0 26.5 22.5
250
13 E4
R76ID2390--3--
1.2
µF 13.0 22.0 26.5 22.5
250
13 E4
R76ID2470--3--
0.82 µF
9.0 17.0 32.0 27.5
200
10 E4
R76IF2270--3--
1.0
µF
11.0 20.0 32.0 27.5
200
10 E4
R76IF2330--3--
1.2
µF
11.0 20.0 32.0 27.5
200
10 E4
R76IF2390--3--
1.5
µF 13.0 22.0 32.0 27.5
200
10 E4
R76IF2470--3--
1.8
µF 13.0 22.0 32.0 27.5
200
10 E4
R76IF2560--3--
2.2
µF 14.0 28.0 32.0 27.5
200
10 E4
R76IF2680--3--
2.7
µF 18.0 33.0 32.0 27.5
200
10 E4
R76IF2820--3--
3.3
µF 18.0 33.0 32.0 27.5
200
10 E4
R76II 2680--3--
3.9
µF 18.0 33.0 32.0 27.5
200
10 E4
R76II 2820--3--
4.7
µF 22.0 37.0 32.0 27.5
200
10 E4
R76II 3100--3--
5.6
µF 22.0 37.0 32.0 27.5
200
10 E4
R76II 3120--3--
1.2
µF
11.0 22.0 41.5 37.5
100
5 E4
R76II 3150--3--
1.5
µF
11.0 22.0 41.5 37.5
100
5 E4
R76II 3180--3--
1.8
µF
11.0 22.0 41.5 37.5
100
5 E4
R76II 3180--7--
2.2
µF 13.0 24.0 41.5 37.5
100
5 E4
R76II 3220--3--
2.7
µF 13.0 24.0 41.5 37.5
100
5 E4
R76II 3220--7--
3.3
µF 16.0 28.5 41.5 37.5
100
5 E4
R76II 3270--3--
3.9
µF 16.0 28.5 41.5 37.5
100
5 E4
R76II 3270--7--
4.7
µF 19.0 32.0 41.5 37.5
100
5 E4
R76II 3330--3--
5.6
µF 19.0 32.0 41.5 37.5
100
5 E4
R76II 3330--7--
6.8
µF 20.0 40.0 41.5 37.5
100
5 E4
R76II 3390--3--
8.2
µF 20.0 40.0 41.5 37.5
100
5 E4
R76II 3470--3--
10.0
µF 24.0 44.0 41.5 37.5
100
5 E4
12.0
µF 30.0 45.0 41.5 37.5
100
5 E4
15.0
µF 30.0 45.0 41.5 37.5
100
5 E4
2
28 E4
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
All dimensions are in mm.
0.22 µF
Max
dv/dt
(V/µs)
250
Rated
Cap.
Part Number
R76ID1680--3--
R76ID1820--3-R76ID2100--3-R76ID2120--4-R76ID2150--4-R76ID2180--4-R76ID2220--4--
250Vdc / 180Vac
Std dimensions
Max K0
(V /µs)
13 E4
Part Number
2
R76IN3220--0--
R76IN3270--3-R76IN3330--3-R76IN3390--3-R76IN3470--3-R76IN3560--3-R76IN3680--3-R76IN3820--3-R76IN4100--3-R76IN4120--3-R76IR3820--3-R76IR4100--3-R76IR4120--4-R76IR4150--3-R76IR4180--4-R76IR4220--4-R76IR4270--3-R76IR4330--3-R76IR4390--3-R76IR4470--3-R76IR4560--4--
R76IW4120--3-R76IW4150--3-R76IW4180--3-R76IW4220--3-R76IW4270--3-R76IW4330--3-R76IW4390--3-R76IW4470--3-R76IW4560--3-R76IW4680--3-R76IW4820--3-R76IW5100--3-R76IW5120--3-R76IW5150--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
117
09/2008
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
double sided metallized
polyester carrier film
polypropylene film
dielectric
1 section
(400Vdc)
2700 pF
B
3.0
H
L
8.0 10.0
p
7.5
Max
dv/dt
(V/µs)
1700
3300 pF
3.0
8.0 10.0
7.5
1700
136 E4
3900 pF
3.0
8.0 10.0
7.5
1700
136 E4
4700 pF
3.0
8.0 10.0
7.5
1700
136 E4
5600 pF
3.0
8.0 10.0
7.5
1700
136 E4
6800 pF
4.0
9.0 10.0
7.5
1700
136 E4
8200 pF
4.0
9.0 10.0
7.5
1700
136 E4
0.010 µF
4.0
9.0 10.0
7.5
1700
136 E4
0.012 µF
4.0
9.0 10.0
7.5
1700
136 E4
0.015 µF
5.0 10.5 10.0
7.5
1700
136 E4
0.018 µF
5.0 10.5 10.0
7.5
1700
136 E4
0.022 µF
6.0 12.0 10.5
7.5
1700
136 E4
0.027 µF
6.0 12.0 10.5
7.5
1700
136 E4
0.010 µF
4.0
9.0 13.0 10.0
1500
120 E4
0.012 µF
4.0
9.0 13.0 10.0
1500
120 E4
0.015 µF
4.0
9.0 13.0 10.0
1500
120 E4
0.018 µF
4.0
9.0 13.0 10.0
1500
120 E4
0.022 µF
4.0
9.0 13.0 10.0
1500
120 E4
0.027 µF
5.0 11.0 13.0 10.0
1500
120 E4
0.033 µF
5.0 11.0 13.0 10.0
1500
120 E4
0.039 µF
6.0 12.0 13.0 10.0
1500
120 E4
0.047 µF
6.0 12.0 13.0 10.0
1500
120 E4
0.033 µF
5.0 11.0 18.0 15.0
900
72 E4
0.039 µF
5.0 11.0 18.0 15.0
900
72 E4
0.047 µF
5.0 11.0 18.0 15.0
900
72 E4
0.056 µF
5.0 11.0 18.0 15.0
900
72 E4
0.068 µF
6.0 12.0 18.0 15.0
900
72 E4
0.082 µF
6.0 12.0 18.0 15.0
900
72 E4
0.10
µF
7.5 13.5 18.0 15.0
900
72 E4
0.10
µF
9.0 12.5 18.0 15.0
900
72 E4
0.12
µF
7.5 13.5 18.0 15.0
900
72 E4
0.12
µF
9.0 12.5 18.0 15.0
900
72 E4
0.15
µF
8.5 14.5 18.0 15.0
900
72 E4
0.15
µF 13.0 12.0 18.0 15.0
900
72 E4
0.18
µF 10.0 16.0 18.0 15.0
900
72 E4
0.18
µF 13.0 12.0 18.0 15.0
900
72 E4
0.22
µF 10.0 16.0 18.0 15.0
900
72 E4
0.27
µF
11.0 19.0 18.0 15.0
900
72 E4
Rated
Cap.
400Vdc / 250Vac*
Std dimensions
Max K0
(V2/µs)
136 E4
Rated
Cap.
Part Number
400Vdc / 250Vac*
Std dimensions
Max
dv/dt
(V/µs)
500
Max K0
(V2/µs)
40 E4
0.12 µF
B
H
L
p
6.0 15.0 26.5 22.5
R76MD1330--3--
0.15 µF
6.0 15.0 26.5 22.5
500
40 E4
R76MD1390--3--
0.18 µF
6.0 15.0 26.5 22.5
500
40 E4
R76MD1470--3--
0.22 µF
7.0 16.0 26.5 22.5
500
40 E4
R76MD1560--3--
0.27 µF
8.5 17.0 26.5 22.5
500
40 E4
R76MD1680--4--
0.33 µF
8.5 17.0 26.5 22.5
500
40 E4
R76MD1820--4--
0.39 µF 10.0 18.5 26.5 22.5
500
40 E4
R76MD2100--4--
0.47 µF 10.0 18.5 26.5 22.5
500
40 E4
R76MD2120--4--
0.56 µF
11.0 20.0 26.5 22.5
500
40 E4
R76MD2150--4--
0.68 µF 13.0 22.0 26.5 22.5
500
40 E4
R76MD2180--4--
0.39 µF
9.0 17.0 32.0 27.5
300
24 E4
R76MD2220--3--
0.47 µF
9.0 17.0 32.0 27.5
300
24 E4
R76MD2270--3--
0.56 µF
11.0 20.0 32.0 27.5
300
24 E4
R76MF2100--0--
0.68 µF
11.0 20.0 32.0 27.5
300
24 E4
R76MF2120--0--
0.82 µF 13.0 22.0 32.0 27.5
300
24 E4
R76MF2150--3--
1.0
µF 13.0 22.0 32.0 27.5
300
24 E4
R76MF2180--3--
1.2
µF 14.0 28.0 32.0 27.5
300
24 E4
R76MF2220--3--
1.5
µF 18.0 33.0 32.0 27.5
300
24 E4
R76MF2270--3--
1.8
µF 18.0 33.0 32.0 27.5
300
24 E4
R76MF2330--3--
2.2
µF 22.0 37.0 32.0 27.5
300
24 E4
R76MF2390--3--
2.7
µF 22.0 37.0 32.0 27.5
300
24 E4
R76MF2470--3--
1.0
µF
11.0 22.0 41.5 37.5
180
14 E4
R76MI 2330--0--
1.2
µF 13.0 24.0 41.5 37.5
180
14 E4
R76MI 2390--3--
1.5
µF 13.0 24.0 41.5 37.5
180
14 E4
R76MI 2470--3--
1.8
µF 16.0 28.5 41.5 37.5
180
14 E4
R76MI 2560--3--
2.2
µF 19.0 32.0 41.5 37.5
180
14 E4
R76MI 2680--3--
2.7
µF 19.0 32.0 41.5 37.5
180
14 E4
R76MI 2820--3--
3.3
µF 19.0 32.0 41.5 37.5
180
14 E4
R76MI 3100--3--
3.9
µF 20.0 40.0 41.5 37.5
180
14 E4
R76MI 3100--7--
4.7
µF 20.0 40.0 41.5 37.5
180
14 E4
R76MI 3120--3--
5.6
µF 24.0 44.0 41.5 37.5
180
14 E4
R76MI 3120--7--
6.8
µF 30.0 45.0 41.5 37.5
180
14 E4
R76MI 3150--3--
8.2
µF 30.0 45.0 41.5 37.5
180
14 E4
R76MI 3180--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
R76MD1270--3--
R76MI 3150--7-R76MI 3180--7-R76MI 3220--3--
Part Number
R76MN3120--3--
R76MN3150--3-R76MN3180--3-R76MN3220--3-R76MN3270--3-R76MN3330--3-R76MN3390--3-R76MN3470--3-R76MN3560--3-R76MN3680--3-R76MR3390--3-R76MR3470--3-R76MR3560--3-R76MR3680--3-R76MR3820--3-R76MR4100--4-R76MR4120--4-R76MR4150--3-R76MR4180--3-R76MR4220--3-R76MR4270--3--
R76MW4100--3-R76MW4120--3-R76MW4150--3-R76MW4180--3-R76MW4220--3-R76MW4270--3-R76MW4330--3-R76MW4390--3-R76MW4470--3--
R76MW4560--3-R76MW4680--3-R76MW4820--3--
R76MI 3270--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the above values.
*Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).
09/2008
118
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE:
Rated
Cap.
H
8.0
L
10.0
p
7.5
Max
dv/dt
(V/µs)
2800
630Vdc/250Vac*
Std dimensions
Max K0
(V2/µs)
353 E4
680 pF
B
3.0
820 pF
3.0
8.0
10.0
7.5
2800
353 E4
1000 pF
3.0
8.0
10.0
7.5
2800
353 E4
1200 pF
3.0
8.0
10.0
7.5
2800
353 E4
1500 pF
3.0
8.0
10.0
7.5
2800
353 E4
1800 pF
3.0
8.0
10.0
7.5
2800
353 E4
2200 pF
3.0
8.0
10.0
7.5
2800
353 E4
2700 pF
4.0
9.0
10.0
7.5
2800
353 E4
3300 pF
4.0
9.0 10.0
7.5
2800
355 E4
3900 pF
4.0
9.0
10.0
7.5
2800
353 E4
4700 pF
4.0
9.0
10.0
7.5
2800
353 E4
5600 pF
4.0
9.0
10.0
7.5
2800
353 E4
6800 pF
5.0 10.5
10.0
7.5
2800
353 E4
8200 pF
5.0 10.5
10.0
7.5
2800
353 E4
0.010 µF
6.0 12.0
10.5
7.5
2800
353 E4
0.012 µF
6.0 12.0
10.5
7.5
2800
353 E4
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
Part Number
R76
double sided metallized
polyester carrier film
R76PD0680--0--
1 section
(630Vdc/250Vac)
R76PD0820--0-R76PD1100--0--
polypropylene film
dielectric
R76PD1120--0-R76PD1150--0-R76PD1180--0--
R76PD1220--0-R76PD1270--4-R76PD1330--4--
R76PD1390--4-R76PD1470--4-R76PD1560--4-R76PD1680--4-R76PD1820--4--
R76PD2100--3-R76PD2120--3--
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table. The dv/dt test is
carried out at 2 times the above values.
*Not suitable for across-the-line applications.
Please refer to Interference Suppression Capacitors (page145)
119
09/2008
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE:
Rated
Cap.
3900 pF
4700 pF
5600 pF
6800 pF
8200 pF
0.010 µF
0.012 µF
0.015 µF
0.018 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
0.047 µF
0.056 µF
0.056 µF
0.068 µF
0.068 µF
0.082 µF
0.082 µF
0.10 µF
0.12 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.10 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
0.27 µF
0.33 µF
0.39 µF
630Vdc / 400Vac
Std dimensions
B
H
L
p
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
4.0 9.0 13.0 10.0
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
9.0 12.5 18.0 15.0
7.5 13.5 18.0 15.0
9.0 12.5 18.0 15.0
8.5 14.5 18.0 15.0
9.0 12.5 18.0 15.0
8.5 14.5 18.0 15.0
13.0 12.0 18.0 15.0
10.0 16.0 18.0 15.0
11.0 19.0 18.0 15.0
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
8.5 17.0 26.5 22.5
8.5 17.0 26.5 22.5
10.0 18.5 26.5 22.5
11.0 20.0 26.5 22.5
11.0 20.0 26.5 22.5
13.0 22.0 26.5 22.5
polypropylene film
dielectric
double sided metallized
polyester carrier film
2 sections
(630Vdc/400Vac)
single sided metallized
polypropylene film
Max
dv/dt
(V/µs)
3000
3000
3000
3000
3000
3000
3000
3000
3000
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
Max K0
(V /µs)
378 E4
378 E4
378 E4
378 E4
378 E4
378 E4
378 E4
378 E4
378 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
315 E4
189 E4
189 E4
189 E4
189 E4
189 E4
189 E4
189 E4
189 E4
189 E4
189 E4
189 E4
189 E4
Part Number
Rated
Cap.
2
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%); J (±5%); K (±10%)
09/2008
R76
R76PF1390--0-R76PF1470--0-R76PF1560--0-R76PF1680--0-R76PF1820--0-R76PF2100--3-R76PF2120--3-R76PF2150--3-R76PF2180--3-R76PI2120--0-R76PI2150--0-R76PI2180--0-R76PI2220--3-R76PI2270--3-R76PI2330--3-R76PI2390--3-R76PI2470--3-R76PI2470--7-R76PI2560--3-R76PI2560--7-R76PI2680--3-R76PI2680--7-R76PI2820--3-R76PI2820--7-R76PI3100--3-R76PI3120--3-R76PN2470--0-R76PN2560--0-R76PN2680--0-R76PN2820--3-R76PN3100--3-R76PN3120--3-R76PN3150--3-R76PN3180--3-R76PN3220--3-R76PN3270--3-R76PN3330--3-R76PN3390--3--
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
630Vdc / 400Vac
Std dimensions
B
H
L
p
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
11.0 20.0 32.0 27.5
11.0 20.0 32.0 27.5
13.0 22.0 32.0 27.5
13.0 22.0 32.0 27.5
13.0 25.0 32.0 27.5
14.0 28.0 32.0 27.5
18.0 33.0 32.0 27.5
18.0 33.0 32.0 27.5
22.0 37.0 32.0 27.5
22.0 37.0 32.0 27.5
11.0 22.0 41.5 37.5
11.0 22.0 41.5 37.5
11.0 22.0 41.5 37.5
11.0 22.0 41.5 37.5
11.0 22.0 41.5 37.5
13.0 24.0 41.5 37.5
16.0 28.5 41.5 37.5
16.0 28.5 41.5 37.5
16.0 28.5 41.5 37.5
19.0 32.0 41.5 37.5
20.0 40.0 41.5 37.5
20.0 40.0 41.5 37.5
24.0 44.0 41.5 37.5
30.0 45.0 41.5 37.5
30.0 45.0 41.5 37.5
30.0 45.0 41.5 37.5
Max
dv/dt
(V/µs)
900
900
900
900
900
900
900
900
900
900
900
900
900
900
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
Max K0
Part Number
(V /µs)
113 E4
113 E4
113 E4
113 E4
113 E4
113 E4
113 E4
113 E4
113 E4
113 E4
113 E4
113 E4
113 E4
113 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
56 E4
R76PR3150--3-R76PR3180--3-R76PR3220--3-R76PR3270--3-R76PR3330--4-R76PR3390--3-R76PR3470--3-R76PR3560--3-R76PR3680--4-R76PR3820--3-R76PR4100--3-R76PR4120--3-R76PR4150--3-R76PR4180--3-R76PW3330--3-R76PW3390--3-R76PW3470--3-R76PW3560--3-R76PW3680--3-R76PW3820--3-R76PW4100--3-R76PW4120--3-R76PW4150--3-R76PW4180--3-R76PW4220--3-R76PW4270--3-R76PW4330--3-R76PW4390--3-R76PW4470--3-R76PW4560--3--
2
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%); J (±5%); K (±10%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table. The dv/dt test is
carried out at 2 times the above values.
120
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
220 pF
B
3.0
H
L
8.0 10.0
p
7.5
Max
dv/dt
(V/µs)
6000
270 pF
3.0
8.0 10.0
7.5
6000
330 pF
3.0
8.0 10.0
7.5
6000
390 pF
3.0
8.0 10.0
7.5
6000
470 pF
3.0
8.0 10.0
7.5
6000
560 pF
3.0
8.0 10.0
7.5
6000
680 pF
4.0
9.0 10.0
7.5
6000
820 pF
4.0
9.0 10.0
7.5
6000
1000 pF
4.0
9.0 10.0
7.5
6000
1200 pF
4.0
9.0 10.0
7.5
6000
1500 pF
5.0 10.5 10.0
7.5
6000
1800 pF
5.0 10.5 10.0
7.5
6000
2200 pF
5.0 10.5 10.0
7.5
6000
2700 pF
6.0 12.0 10.5
7.5
6000
3300 pF
6.0 12.0 10.5
7.5
6000
Rated
Cap.
1000Vdc / 400Vac
Std dimensions
Max K0
polypropylene film
dielectric
Part Number
(V2/µs)
1200 E4 R76QD0220--0-1200 E4 R76QD0270--0--
2 sections
(1000Vdc)
1200 E4 R76QD0330--0-1200 E4 R76QD0390--0--
double sided metallized
polyester carrier film
single sided metallized
polypropylene film
1200 E4 R76QD0470--0-1200 E4 R76QD0560--0-1200 E4 R76QD0680--4-1200 E4 R76QD0820--4-1200 E4 R76QD1100--4-1200 E4 R76QD1120--4-1200 E4 R76QD1150--4-1200 E4 R76QD1180--4-1200 E4 R76QD1220--4-1200 E4 R76QD1270--0-1200 E4 R76QD1330--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%)*; J (±5%); K (±10%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage
(VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above
value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage waveform and in any case it cannot overcome the value given in
the above table. The dv/dt test is carried out at 2 times the
above values.
121
* Tolerance H (+2.5%) for C ≥1000pF
09/2008
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
polypropylene film
dielectric
double sided metallized
polyester carrier film
single sided metallized
polypropylene film
2 sections
(1000Vdc)
470 pF
B
4.0
H
L
p
9.0 13.0 10.0
Max
dv/dt
(V/µs)
4800
560 pF
4.0
9.0 13.0 10.0
4800
680 pF
4.0
9.0 13.0 10.0
4800
820 pF
4.0
9.0 13.0 10.0
4800
1000 pF
4.0
9.0 13.0 10.0
4800
1200 pF
4.0
9.0 13.0 10.0
4800
1500 pF
4.0
9.0 13.0 10.0
4800
1800 pF
4.0
9.0 13.0 10.0
4800
Rated
Cap.
1000Vdc / 600Vac
Std dimensions
2200 pF
4.0
9.0 13.0 10.0
4800
2700 pF
4.0
9.0 13.0 10.0
4800
3300 pF
4.0
9.0 13.0 10.0
4800
3900 pF
5.0 11.0 13.0 10.0
4800
4700 pF
5.0 11.0 13.0 10.0
4800
5600 pF
6.0 12.0 13.0 10.0
4800
6800 pF
6.0 12.0 13.0 10.0
4800
8200 pF
4.0 10.0 18.0 15.0
3300
8200 pF
5.0 11.0 18.0 15.0
3300
0.010 µF
4.0 10.0 18.0 15.0
3300
0.010 µF
5.0 11.0 18.0 15.0
3300
0.012 µF
5.0 11.0 18.0 15.0
3300
0.015 µF
5.0 11.0 18.0 15.0
3300
0.018 µF
5.0 11.0 18.0 15.0
3300
0.022 µF
6.0 12.0 18.0 15.0
3300
0.022 µF
9.0 12.5 18.0 15.0
3300
0.027 µF
7.5 13.5 18.0 15.0
3300
0.027 µF
9.0 12.5 18.0 15.0
3300
0.033 µF
7.5 13.5 18.0 15.0
3300
0.033 µF 13.0 12.0 18.0 15.0
3300
0.039 µF
8.5 14.5 18.0 15.0
3300
0.047 µF
8.5 14.5 18.0 15.0
3300
0.027 µF
6.0 15.0 26.5 22.5
2100
0.033 µF
6.0 15.0 26.5 22.5
2100
0.039 µF
6.0 15.0 26.5 22.5
2100
0.047 µF
7.0 16.0 26.5 22.5
2100
0.056 µF
7.0 16.0 26.5 22.5
2100
0.068 µF
8.5 17.0 26.5 22.5
2100
0.082 µF 10.0 18.5 26.5 22.5
2100
0.10 µF 10.0 18.5 26.5 22.5
2100
0.12 µF
11.0 20.0 26.5 22.5
2100
0.15 µF 13.0 22.0 26.5 22.5
2100
Max K0
(V /µs)
960 E4 R76QF 0470--0-960 E4 R76QF 0560--0-960 E4 R76QF 0680--0--
0.12 µF
9.0 17.0 32.0 27.5
1000
0.15 µF
11.0 20.0 32.0 27.5
1000
0.18 µF 13.0 22.0 32.0 27.5
1000
0.22 µF 13.0 22.0 32.0 27.5
1000
0.27 µF 13.0 25.0 32.0 27.5
1000
0.33 µF 14.0 28.0 32.0 27.5
1000
0.39 µF 18.0 33.0 32.0 27.5
1000
0.47 µF 18.0 33.0 32.0 27.5
1000
0.56 µF 22.0 37.0 32.0 27.5
1000
0.68 µF 22.0 37.0 32.0 27.5
1000
2
960 E4 R76QF 0820--0-960 E4 R76QF 1100--0-960 E4 R76QF 1120--0--
960 E4 R76QF 1150--0-960 E4 R76QF 1180--0-960 E4 R76QF 1220--0--
960 E4 R76QF 1270--0-960 E4 R76QF 1330--3-960 E4 R76QF 1390--3--
960 E4 R76QF 1470--3-960 E4 R76QF 1560--3-960 E4 R76QF 1680--3-660 E4 R76QI 1820--4--
660 E4 R76QI 1820--0-660 E4 R76QI 2100--4-660 E4 R76QI 2100--3-660 E4 R76QI 2120--3-660 E4 R76QI 2150--4-660 E4 R76QI 2180--4-660 E4 R76QI 2220--4-660 E4 R76QI 2220--7-660 E4 R76QI 2270--4-660 E4 R76QI 2270--7-660 E4 R76QI 2330--4-660 E4 R76QI 2330--7--
0.10 µF
1000Vdc / 600Vac
Std dimensions
0.18 µF
11.0 22.0 41.5 37.5
500
0.22 µF
11.0 22.0 41.5 37.5
500
0.27 µF 13.0 24.0 41.5 37.5
500
0.33 µF 13.0 24.0 41.5 37.5
500
0.39 µF 16.0 28.5 41.5 37.5
500
0.47 µF 16.0 28.5 41.5 37.5
500
0.56 µF 16.0 28.5 41.5 37.5
500
0.68 µF 19.0 32.0 41.5 37.5
500
0.82 µF 20.0 40.0 41.5 37.5
500
1.0
µF 20.0 40.0 41.5 37.5
500
1.2
µF 24.0 44.0 41.5 37.5
500
1.5
µF 24.0 44.0 41.5 37.5
500
1.8
µF 30.0 45.0 41.5 37.5
500
2.2
µF 30.0 45.0 41.5 37.5
500
Max K0
Part Number
(V /µs)
200 E4 R76QR 3100--4-200 E4 R76QR 3120--4-2
200 E4 R76QR 3150--3-200 E4 R76QR 3180--3-200 E4 R76QR 3220--3-200 E4 R76QR 3270--4-200 E4 R76QR 3330--3-200 E4 R76QR 3390--3-200 E4 R76QR 3470--3-200 E4 R76QR 3560--3--
200 E4 R76QR 3680--3-100 E4 R76QW3180--3-100 E4 R76QW3220--3-100 E4 R76QW3270--3-100 E4 R76QW3330--3-100 E4 R76QW3390--3-100 E4 R76QW3470--3-100 E4 R76QW3560--3-100 E4 R76QW3680--3-100 E4 R76QW3820--3-100 E4 R76QW4100--3-100 E4 R76QW4120--3-100 E4 R76QW4150--3-100 E4 R76QW4180--3-100 E4 R76QW4220--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%)*; J (±5%); K (±10%)
660 E4 R76QI 2390--4-660 E4 R76QI 2470--4-420 E4 R76QN 2270--0-420 E4 R76QN 2330--3-420 E4 R76QN 2390--3-420 E4 R76QN 2470--3-420 E4 R76QN 2560--3-420 E4 R76QN 2680--3-420 E4 R76QN 2820--3--
420 E4 R76QN 3100--3-420 E4 R76QN 3120--3-420 E4 R76QN 3150--3--
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%)*; J (±5%); K (±10%)
09/2008
B
H
L
p
9.0 17.0 32.0 27.5
Max
dv/dt
(V/µs)
1000
Rated
Cap.
Part Number
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table. The dv/dt test is
carried out at 2 times the above values.
122
* Tolerance H (+2.5%) for C ≥1000pF
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
polypropylene film
dielectric
double sided metallized
polyester carrier film
single sided metallized
polypropylene film
2 sections
(1600Vdc)
Rated
Cap.
3300
3300
3900
3900
4700
4700
5600
5600
6800
8200
0.010
0.012
0.015
0.018
0.018
0.022
0.022
0.027
0.033
1600Vdc / 650Vac
Std dimensions
B
H
L
pF
4.0 10.0 18.0
pF
5.0 11.0 18.0
pF
4.0 10.0 18.0
pF
5.0 11.0 18.0
pF
4.0 10.0 18.0
pF
5.0 11.0 18.0
pF
4.0 10.0 18.0
pF
5.0 11.0 18.0
pF
5.0 11.0 18.0
pF
5.0 11.0 18.0
µF
5.0 11.0 18.0
µF
6.0 12.0 18.0
µF
6.0 12.0 18.0
µF
7.5 13.5 18.0
µF
9.0 12.5 18.0
µF
7.5 13.5 18.0
µF 13.0 12.0 18.0
µF
8.5 14.5 18.0
µF
8.5 14.5 18.0
p
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
Max
dv/dt
(V/µs)
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
Max K0
(V /µs)
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
1900 E4
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%); J (±5%); K (±10%)
Rated
Cap.
Part Number
2
R76TI1330--4-R76TI1330--3-R76TI1390--4-R76TI1390--3-R76TI1470--4-R76TI1470--3-R76TI1560--4-R76TI1560--3-R76TI1680--3-R76TI1820--4-R76TI2100--4-R76TI2120--4-R76TI2150--4-R76TI2180--4-R76TI2180--7-R76TI2220--4-R76TI2220--7-R76TI2270--4-R76TI2330--4--
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
1600Vdc / 650Vac
Std dimensions
B
6.0
6.0
6.0
6.0
6.0
7.0
7.0
8.5
10.0
10.0
11.0
9.0
9.0
9.0
9.0
11.0
11.0
13.0
13.0
14.0
18.0
18.0
18.0
22.0
22.0
11.0
11.0
11.0
11.0
13.0
13.0
13.0
16.0
16.0
19.0
20.0
20.0
24.0
24.0
30.0
H
15.0
15.0
15.0
15.0
15.0
16.0
16.0
17.0
18.5
18.5
20.0
17.0
17.0
17.0
17.0
20.0
20.0
22.0
25.0
28.0
33.0
33.0
33.0
37.0
37.0
22.0
22.0
22.0
22.0
24.0
24.0
24.0
28.5
28.5
32.0
40.0
40.0
44.0
44.0
45.0
L
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
p
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
Max
dv/dt
(V/µs)
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
Max K0
Part Number
(V /µs)
960 E4
960 E4
960 E4
960 E4
960 E4
960 E4
960 E4
960 E4
960 E4
960 E4
960 E4
640 E4
640 E4
640 E4
640 E4
640 E4
640 E4
640 E4
640 E4
640 E4
640 E4
640 E4
640 E4
640 E4
640 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
384 E4
R76TN 2150--3-R76TN 2180--3-R76TN 2220--3-R76TN 2270--3-R76TN 2330--4-R76TN 2390--4-R76TN 2470--4-R76TN 2560--4-R76TN 2680--4-R76TN 2820--4-R76TN 3100--4-R76TR 2390--3-R76TR 2470--3-R76TR 2560--3-R76TR 2680--3-R76TR 2820--3-R76TR 3100--3-R76TR 3120--3-R76TR 3150--4-R76TR 3180--4-R76TR 3220--3-R76TR 3270--3-R76TR 3330--3-R76TR 3390--3-R76TR 3470--3-R76TW 2820--3-R76TW 3100--3-R76TW 3120--3-R76TW 3150--3-R76TW 3180--3-R76TW 3220--3-R76TW 3270--3-R76TW 3330--3-R76TW 3390--3-R76TW 3470--3-R76TW 3560--3-R76TW 3680--3-R76TW 3820--3-R76TW 4100--3-R76TW 4120--3--
2
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%); J (±5%); K (±10%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this
case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse
characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table.
The dv/dt test is carried out at 2 times the above values.
123
09/2008
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
polypropylene film
dielectric
PRODUCT CODE: R76
double sided metallized
polyester carrier film
single sided metallized
polypropylene film
2 sections
(2000Vdc)
Rated
Cap.
100
120
150
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
820
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2200
2700
2700
3300
3900
4700
5600
6800
8200
0.010
0.010
0.012
0.015
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
µF
µF
µF
µF
2000Vdc / 700Vac
Std dimensions
B
4.0
4.0
4.0
4.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
4.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
7.5
13.0
8.5
8.5
H
10.0
10.0
10.0
10.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
10.0
11.0
11.0
11.0
11.0
12.0
12.0
12.0
13.5
12.0
14.5
14.5
L
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
p
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
Max
dv/dt
(V/µs)
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
9500
Max K0
(V2/µs)
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
3800 E4
Mechanical version and packaging (Table1)
Internal use
Tolerance: H (±2.5%)*; (J (±5%); K (±10%)
All dimensions are in mm
Rated
Cap.
Part Number
R76UI0100--4-R76UI0120--4-R76UI0150--4-R76UI0180--4-R76UI0220--4-R76UI0220--0-R76UI0270--4-R76UI0270--0-R76UI0330--4-R76UI0330--0-R76UI0390--4-R76UI0390--0-R76UI0470--4-R76UI0470--0-R76UI0560--4-R76UI0560--0-R76UI0680--4-R76UI0680--0-R76UI0820--4-R76UI0820--0-R76UI1100--4-R76UI1100--3-R76UI1120--4-R76UI1120--3-R76UI1150--4-R76UI1150--3-R76UI1180--4-R76UI1180--3-R76UI1220--4-R76UI1220--3-R76UI1270--4-R76UI1270--3-R76UI1330--4-R76UI1390--4-R76UI1470--4-R76UI1560--4-R76UI1680--4-R76UI1820--4-R76UI2100--4-R76UI2100--7-R76UI2120--4-R76UI2150--4--
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
µF
2000Vdc / 700Vac
Std dimensions
B
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
7.0
7.0
8.5
10.0
10.0
11.0
9.0
9.0
9.0
9.0
11.0
13.0
13.0
13.0
14.0
18.0
18.0
22.0
22.0
11.0
11.0
11.0
11.0
11.0
11.0
13.0
13.0
16.0
16.0
19.0
20.0
20.0
24.0
24.0
30.0
30.0
H
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
16.0
16.0
17.0
18.0
18.0
20.0
17.0
17.0
17.0
17.0
20.0
22.0
22.0
25.0
28.0
33.0
33.0
37.0
37.0
22.0
22.0
22.0
22.0
22.0
22.0
24.0
24.0
28.5
28.5
32.0
40.0
40.0
44.0
44.0
45.0
45.0
L
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
p
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
Max
dv/dt
(V/µs)
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
2300
2300
2300
2300
2300
2300
2300
2300
2300
2300
2300
2300
2300
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
Max K0
(V2/µs)
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
1400 E4
920 E4
920 E4
920 E4
920 E4
920 E4
920 E4
920 E4
920 E4
920 E4
920 E4
920 E4
920 E4
920 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
600 E4
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V. The pulse characteristic K0 depends on the
voltage wave-form and in any case it cannot overcome Mechanical version and packaging (Table1)
the value given in the above table. The dv/dt test is Internal use
Tolerance: H (±2.5%); (J (±5%); K (±10%)
carried out at 2 times the above values.
**Tolerance H (±2.5%) for C ≥1000pF
09/2008
124
Part Number
R76UN1100--0-R76UN1120--0-R76UN1150--0-R76UN1180--0-R76UN1220--0-R76UN1270--0-R76UN1330--0-R76UN1390--0-R76UN1470--0-R76UN1560--0-R76UN1680--0-R76UN1820--3-R76UN2100--3-R76UN2120--3-R76UN2150--4-R76UN2180--4-R76UN2220--4-R76UN2270--4-R76UN2330--4-R76UN2390--4-R76UN2470--4-R76UN2560--4-R76UR2220--3-R76UR2270--3-R76UR2330--3-R76UR2390--4-R76UR2470--3-R76UR2560--3-R76UR2680--3-R76UR2820--4-R76UR3100--3-R76UR3120--3-R76UR3150--3-R76UR3180--3-R76UR3220--3-R76UW2330--3-R76UW2390--3-R76UW2470--3-R76UW2560--3-R76UW2680--3-R76UW2820--3-R76UW3100--3-R76UW3120--3-R76UW3150--3-R76UW3180--3-R76UW3220--3-R76UW3270--3-R76UW3330--3-R76UW3390--3-R76UW3470--3-R76UW3560--3-R76UW3680--3--
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
test method and performance
electrical characteristics
Rated voltage (VR):
250Vdc - 0400Vdc - 630Vdc
630Vdc - 1000Vdc - 1600Vdc - 2000Vdc
Rated temperature (TR):
+85°C for VR (d.c.)
+75°C for VR (a.c.)
for 1 section
for 2 sections.
Test conditions
Temperature:
Relative humidity (RH):
Test duration:
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ):
≤10x10-4 at 1kHz
Insulation resistance:
≥50% of initial limit.
Endurance:
Test conditions
Temperature:
Test duration:
Voltage applied:
1 section
2 sections
Capacitance tolerances (measured at 1 kHz):
for C<1000pF
±5% (J); ±10% (K)
±2.5% (H); ±5% (J); ±10% (K); for C≥1000pF
Total self-inductance (L):
(Lead length ~2 mm)
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ):≤10x10-4 at 110kHz for C≤1µF
≤10x10-4 at 111kHz for C>1µF
Insulation resistance:
≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Pitch (mm)
7.5
10
15
22.5
27.5
37.5
L (nH) ≈
8
9
10
18
18
20
Solder bath temperature:
+260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |∆C/C|: ≤1%
DF change (∆tgδ):≤10x10-4 at 110kHz for C≤1µF
≤10x10-4 at 111kHz for C>1µF
Insulation resistance:
≥initial limit.
Dissipation factor (DF):
tgδx10-4 at +25°C ±5°C
kHz
1
10
100
C≤0.1µF
≤030
≤04
≤15
0.1µF<C≤1.0µF
≤3
≤6
C>1µF
≤4
Insulation resistance:
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
Performance
+85°C±2°C
2000 h
1.25xVR (d.c.)
Performance
Capacitance values:
E12 series (IEC 60063 Norm).
+40°C±2°C
93% ±2%
56 days
Performance
Temperature derated voltage:
The following decreasing factor has to be applied on the
rated voltage:
+85°C to +105°C: 1.25% per °C for VR (d.c.).
+75°C to +105°C: 1.35% per °C for VR (a.c.)
Capacitance range:
680pF to 15µF
100pF to 5.6µF
Damp heat, steady state:
≥1x105 MΩ for C≤0.33µF
≥30000 s
for C>0.33µF
* Typical value.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12).
Performance
Capacitance change |∆C/C|: ≤0.5%
+25°C±5°C
1 min
100Vdc
(5x105 MΩ)*
(150000 s)*
Test voltage between terminations:
1.6xVR applied for 2 s at +25°C±5°C
125
09/2008
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
Note: p (pitch) in mm.
09/2008
126
R76
MMKP Series
polyPROPYLENE capacitor WITH DOUBLE
SIDED METALLIZED FILM ELECTRODES D.C. AND
PULSE APPLICATIONS
PRODUCT CODE: R76
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
Note: p (pitch) in mm.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.