HARTMAN Aerospace Power Products Phase Rotation Sensor Features: • SPDT Main Contacts • Phase Sequence Relay • 208 VAC, 400 Hz, 3Ø Operation • 2 Amps • High Reliability • Meets many requirements of MIL-R-6106 • Light Weight Construction E-341 SPDT, 2 Amps, 208 VAC CONTACTOR CONFIGURATION Notes: Dimensions for this product are expressed in inches. Multiply values by 25.4 for millimeters. PRODUCT SPECIFICATIONS Construction Input Voltage Environmental: Temperature Shock Vibration Operating Characteristics: Pick-Up Solder Sealed and Potted 208 Volts, L to L, 400 Hz -55°C to +85°C 25g 1/2 SINE, 6 - 9 Millisecond Duration .060" DA 5 to 55 Hz, 10G’s 1/8, 55 to 1500 Hz Phase sequence L1-L2-L3 balanced phase voltages. 80-95 Volts L to N. Not possible at any voltage with phase sequence L1-L3-L2. One or more phase open will not pick-up below 250 volts L to N. With balanced phase voltages above 50 volts L to N. 2 phases remaining at 115 volts, one phase voltage reduced. Above 5 volts L to N on the low phase. 2 Amps, 30 VDC Resistive 1 Amp, Resistive at 115V RMS 10 Oz. Drop-Out Contact Rating Weight For factory-direct application assistance, contact the HARTMAN product team at (419) 521-9500, Fax (419) 526-2749. © 2004 by Tyco Electronics Corporation. All Rights Reserved. HARTMAN and TYCO are trademarks. Catalog (web doc only) Revised 5-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967