350 Watt, 7.9 - 8.4 GHz, CW traveling wave tube, periodic-permanent-magnet focused, coaxial input, waveguide output, conduction cooled. Custom configurations are also available. These variations in the performance and configuration include: mechanical configuration, electrical and RF connections, and dual-stage depressed collector. Features •350 Watt •Coaxial Input •Waveguide Output •Weight: 7 lbs. approx. •Conduction Cooled model Frequency (GHz) 7.9 - 8.4 VTX-6264A2 Power output (min) 350 W TYPICAL OPERATING PARAMeters MAXIMUMMINIMUM Heater Voltage:6.6 6.0 Heater Surge Current:5 --- Helix Voltage: 8.7 8.1 Helix Current: 20 --- Collector Voltage : 4.5 4.1 Cathode Current: 350 --- Cathode Warm-up Time:--- 3 Drive Power: 10 --- Baseplate Temp: 110 --- Load VSWR: 1.5:1 --- TYPICALUNITS --- V --- A --- kVdc --- mAdc --- kVdc --- mAdc ---Minutes --- mW --- °C --- VSWR The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone: 1(800) 414-8823. fax : (650) 856-0705 | email : [email protected] CPI 6/12 CPI | VTX-6264a2, 4CW50,000J 350 W, X-band helix twt VTX-6264A2, 350 W, X-Band Helix TWT