Rev A WMIPEA1020 Series 20 Watts Single Output AC/DC Wall Mount Power Supply FEATURES ● Single Output ● Class II Insulation ● RoHS Compliance ● Protection Type: Auto-Recovery ● Applications: MP3 players, I-Pods, POS, DVD ● CEC Efficiency Regulations Compliance (Optional) ● Over Voltage and Short Circuit Protective Installation ● Interchangeable AC Plug Options: EU, UK, AUS, and US Types DESCRIPTION The WMIPEA1020 series offers 20 watts in a single output wall mount power supply with interchangeable plugs. All units are short circuit and over voltage protected. Output voltages range from 5 to 35VDC. Plugs come in United States/Japan (US), Europe (EU), Australia (AUS), and United Kingdom (UK) types. Plugs are sold separately so please contact factory for ordering details. SPECIFICATIONS: WMIPEA1020 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range (Limit) Input Frequency OUTPUT SPECIFICATIONS Output Current Output Voltage Line Regulation Load Regulation Output Power 90 ~ 264VAC 47 ~ 63Hz See Table See Table 1% max. ±5% 20W WMIPEA1020AR, WMIPEA1020R WMIPEA1020CR: 1.2% max. WMIPEA1020DR: 1% max. Ripple & Noise (20MHz BW) PROTECTION Over Voltage Protection Short Circuit Protection GENERAL SPECIFICATIONS Efficiency Class I or Class II LED Indication ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature MTBF PHYSICAL SPECIFICATIONS Dimensions AC Plug Standard Plug Weight SAFETY & EMC Safety (1) / EMC Safety (2) / EMC Safety Standards Yes Yes See Table Class II No 0°C ~ +40°C -20°C ~ +85°C 30,000 hours 3.86(L) x 1.77(W) x 1.32(H) inches 98(L) x 45(W) x 33.5(H) mm EU, UK, AUS, and US Types Optional Approximately 220g UL/CUL, CE, TUV, CCC, FCC, DolR+C-Tick See Table UL60950-1, EN60950-1, UL60065, EN60065 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 7/6/2009 WMIPEA1020 Series 20 Watts Single Output AC/DC Wall Mount Power Supply Rev A MODEL SELECTION GUIDE Input Voltage Preset Voltage Output Voltage Range Maximum Output Current Maximum Output Power Efficiency (Typ) Safety (2) / EMC WMIPEA1020AR 90 ~264VAC 5 VDC 5 ~ 8 VDC 4.0A 20W 68% UL/CUL, TUV WMIPEA1020R 90 ~264VAC 9 VDC 9 ~ 12 VDC 2.0A 20W 70% UL/CUL, TUV WMIPEA1020CR 90 ~264VAC 13 VDC 13 ~ 20 VDC 1.54A 20W 75% UL/CUL, TUV, PSE (16~20VDC) WMIPEA1020DR 90 ~264VAC 21 VDC 21 ~ 35 VDC 0.95A 20W 80% UL/CUL, TUV, PSE (21~30VDC) Model NOTES 1. The output voltage is specified as a range (Ex: 21 ~ 35VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 2. This wall mount power supply has four interchangeable AC plug options available: EU, UK, AUS, and US types. AC plugs are sold separately. Please call factory for ordering details. 3. Other DC plug types and sizes are available. Please call factory for ordering details. MECHANICAL DRAWING Unit: inches (mm) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 7/6/2009