WMIEPU26 SERIES Up to 25 Watts Single Output, Class II AC/DC Wall Mount Power Supply Rev B UK US EU AUS Size: 2.95in x 1.71in x 1.58in (75mm x 43.5mm x 40.2mm) OPTIONS • Single output options available from 5VDC to 48VDC • Interchangeable Plug • Optional Output Connectors APPLICATIONS • • • • • • FEATURES • • • • • Class II Economy Version of our WMISPU26 Series Up to 24 Watts RoHS Compliant Energy Star 2.0, Efficiency Level VI Compliant • 100% Burn In Tested • 1 Year Warranty • Wide Input Voltage Range: 90~264VAC, 47~63Hz • MTBF>100,000 Hours • UL/cUL (UL60950-1:2nd Edition), TUV/GS (EN60950-1:2nd Edition), and CE Safety Approvals • Meets FCC Part-15 Class B and CISPR-22 Class B Emission Limits • Interchangeable Plug Options: EU, UK, AUS, and US Types • Optional Output Connectors DESCRIPTION POS System AV Equipment Industrial PC Note PC Charger LED Lighting The WMIEPU26 Series of Class II AC/DC wall mount power supplies offers up to 25 watts of output power in a 2.95” x 1.71” x 1.58” package. This series consists of single output models ranging from 5 to 48VDC with a wide input voltage range of 90~264VAC. This series meets FCC Part-15 Class B and CISPR-22 Class B Emission Limits and has UL/cUL (UL60950-1:2nd Edition), TUV/GS (EN60950-1:2nd Edition), and CE safety approvals. All units are RoHS and Energy Star Level VI compliant. Plugs come in United States (US), Europe (EU), Australia (AUS), and United Kingdom (UK) types. Plugs are sold separately so please contact factory for ordering details. MODEL SELECTION TABLE (1) Model Number WMIEPU26-102x WMIEPU26-103x WMIEPU26-104x WMIEPU26-105x WMIEPU26-106x WMIEPU26-107x WMIEPU26-108x WMIEPU26-109x WMIEPU26-110x WMIEPU26-111x 12/18/2015 Input Voltage Range Output Voltage(2) Output Current Total Regulation(3) Output Power Efficiency 90~264VAC 5~5.99VDC 6.5~8VDC 8~11VDC 11~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~40VDC 40~48VDC 3.30~2.75A 3.07~2.50A 2.75~2A 2.27~1.92A 1.92~1.56A 1.56~1.19A 1.19~0.92A 0.92~0.75A 0.75~0.62A 0.62~0.53A 5% 5% 5% 5% 5% 5% 4% 4% 4% 4% 16.5W 20W 22W 25W 25W 25W 25W 25W 25W 25W 82% 85.5% 85.9% 86.35% 86.35% 86.35% 87% 87% 88% 88% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 WMIEPU26 SERIES Up to 25 Watts Single Output, Class II AC/DC Wall Mount Power Supply Rev B SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit 264 240 VAC 63 Hz INPUT SPECIFICATIONS Operating Voltage Range Operating Input Voltage Range Safety Approvals Input Voltage Range Input Frequency Input Current Inrush Current 90 100 47 Low Line Io=Full Load, Vin=115VAC 0.55 High Line Io=Full Load, Vin=230VAC 0.35 Low Line Io=Full Load, 25ºC, Cool Start, Vin=115VAC 40 50 High Line Io=Full Load, 25ºC, Cool Start, Vin=230VAC 80 100 No Load Power Consumption OUTPUT SPECIFICATIONS Output Voltage Load Regulation Line Regulation Output Power Output Current Ripple & Noise (peak to peak) Transient Response Time Hold-Up Time Start-Up Time Temperature Coefficient PROTECTION Over Voltage Protection No Load, Vin=230VAC 0.1 A A W See Table Vin=230VAC Io=Full Load Vin=90 to 264VAC 4 0.5 5 1 % % 2 4 % ms S S %/ºC See Table See Table Full Load, Vin=90VAC Io=Full Load to Half Load, Vin=100VAC Io=Full Load, Vin=110VAC Io=Full Load, Vin=100VAC All Outputs 12 3 +0.04 -0.04 None None, but output is protected against short circuit conditions Over Current Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derate linearly from 100% Load at 40ºV to 50% load at 70ºC Storage Temperature 0 -40 40 70 85 ºC ºC Operating Humidity 0 95 % Storage Humidity MTBF GENERAL SPECIFICATIONS Efficiency Dielectric Withstanding Voltage Isolation Resistance Safety Ground Leakage Current PHYSICAL SPECIFICATIONS Weight 0 95 100,000 hours % Operating Temp at 25ºC, calculated per MIL-HDBK-217F Io=Full Load, Vin=2130VAC Primary to Secondary Test Voltage=500VDC Io=Full Load, Vin=240VAC/60Hz See Table 4242 50 0.25 VDC MΩ mA Approx. 7oz (200g) 2.95 x 1.71 x 1.58 inches (75.0 x 43.5 x 40.2 mm) US, EU, AUS, and UK types Optional Output Connector Available Dimensions (L x W x H) AC Plug Output Connector SAFETY UL/cUL (UL60950-1:2nd Edition) TUV/GS (EN60950-1:2nd Editon) CE Safety Approvals EMI Requirements for CISPR-22 EMI Requirements for FCC Part-15 Vin=220VAC Vin=120VAC B Class B Class NOTES (1) (2) (3) (4) (5) The “x” in the model number can be “U” for US type plug; “E” for EU type plug, “A” for AUS type plug, or “K” for UK type plug. The output voltage is specified as a range (Ex: 40~48VDC); the customer must specify what they want the voltage set at. Models WMIEPU26-102~109 need to use AWG#18x2C/4FT output cable in order to meet the total regulation specified. Models WMIEPU26-110~111 need to use AWG#20x2C/4FT output cable in order to meet the total regulation specified. The regulation and efficiency will change if a different output cable is used. Plugs are sold separately, please contact factory for ordering details. Optional output connectors are available. Please contact factory for more information. 12/18/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev B WMIEPU26 SERIES Up to 25 Watts Single Output, Class II AC/DC Wall Mount Power Supply DERATING CURVES Derating Curve MECHANICAL DRAWINGS COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/18/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3