DATASHEET Rev. A WMEA1015 SERIES 10~15 Watts, Class II 90-264VAC Input Voltage Range US, EU, and UK Types Available Wall Mount AC/DC Switching Power Supplies US EU Case Type 1: Straight Type US EU UK Case Type 2: Right Angle & UK Type FEATURES Class II 100% Burn-in and Hi-Pot Tested 90-264VAC Input Voltage Range Optional Output Connectors 10~15 Watts Output Power RoHS and WEEE Compliant Single Outputs CEC Efficiency Regulations Compliance Slim Compact Size UL/cUL 60950-1, TUV/GS EN/IEC 60950-1, CE, CB, Low Ripple & Noise FCC, and PSE Safety Approvals Short Circuit and Over Voltage Protection US, EU, and UK Types Available MTBF: > 30,000 Hours Two Case Types Available: Straight and Right Angle DESCRIPTION The WMEA1015 series of Class II wall mount AC/DC power supplies offers up to 15 Watts of output power in a slim compact package. All models have a single output and a universal input voltage range of 90-264VAC. These supplies are protected against over voltage and short circuit conditions and have been 100% burn-in and Hi-pot tested. This series is CEC, RoHS, and WEE compliant and has UL/cUL 60950-1, TUV/GS EN/IEC 60950-1, CE, CB, FCC, and PSE safety approvals. Models are available in United States (“U” suffix), United Kingdom (“K” suffix), and European (“E” suffix) types. Optional output connectors are also available. Please call factory for more details. 09/06/2011 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 5 Rev. A WMEA1015 Series US, UK, and EU Types 10~15W, Single Outputs Wall Mount AC/DC Power Supplies SPECIFICATIONS: WMEA1015 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit 100 90 115/230 115/230 240 264 VAC 47 50/60 63 Hz Input Current 0.5 A Inrush Current 60 A INPUT SPECIFICATIONS Input Voltage AC input voltage range AC input voltage range (limit) Input Frequency OUTPUT SPECIFICATIONS Output Voltage Line Regulation See Table Defined by changing ±10% of input voltage from nominal line at rated load ±1 Load Regulation ±5 Output Power % See Table Output Current See Table Minimum Load Ripple & Noise % 0 Measured at 20MHz BW with 0.1µF ceramic and 47µF aluminum capacitors in parallel with the output at full load and nominal line Hold-Up Time % See Table 8.3 ms Turn-on Time 3 s PROTECTION Short Circuit Protection Auto-recovery Over Voltage Protection Auto-recovery GENERAL SPECIFICATIONS Efficiency See Table Class I or II Class II ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Humidity 0 40 °C -20 85 °C 5 95 % Cooling Free air convection MTBF > 30,000 hours PHYSICAL SPECIFICATIONS Weight 4.9oz (140g) Case Type 1 Dimensions (L x W x H) Case Type 2 US (Suffix “U) EU (Suffix “E”) US (Suffix “U) EU (Suffix “E”) UK (Suffix “K”) AC Plugs 2.35” x 1.73” x 1.12” (59.8 x 44 x 28.5 mm) 3.06” x 1.72” x 1.17” (77.7 x 43.8 x 29.7 mm) 2.80” x 1.87” x 1.32” (71 x 47.5 x 33.6 mm) 2.80” x 1.87” x 1.25” ( 71 x 47.5 x 31.85 mm) 2.75” x 1.89” x 1.46” (70 x 48 x 37 mm) US, UK, and EU plugs Connector Type optional output connectors available SAFETY & COMPLIANCE UL/cUL 60950-1, TUV/GS EN/IEC 60950-1, CB, CE, FCC, PSE Safety Approvals EMC/EMC FCC Part 15 class B and EN55022 class B Compliance CEC, RoHS, and WEEE 09/06/2011 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 5 WMEA1015 Series US, UK, and EU Types 10~15W, Single Outputs Wall Mount AC/DC Power Supplies Rev. A MODEL SELECTION TABLES Case Type 1 Models Model Number Input Voltage Range Output Voltage (1) 90~264 VAC 3 ~ 5 VDC 6 ~ 9 VDC 10 ~ 15 VDC 16 ~ 24 VDC 3 ~ 5 VDC 6 ~ 9 VDC 10 ~ 15 VDC 16 ~ 24 VDC WMEA1015A1U-vvpp WMEA1015B1U-vvpp WMEA1015C1U-vvpp WMEA1015D1U-vvpp WMEA1015A1E-vvpp WMEA1015B1E-vvpp WMEA1015C1E-vvpp WMEA1015D1E-vvpp Output Current 2.5A 2.0A 1.5A 0.9A 2.5A 2.0A 1.5A 0.9A Output Power 10W 12W 15W 15W 10W 12W 15W 15W Ripple & Noise (2) Efficiency AC Plug 100mVp-p 150mVp-p 200mVp-p 300mVp-p 100mVp-p 150mVp-p 200mVp-p 300mVp-p 70% 70% 75% 75% 70% 70% 75% 75% US US US US EU EU EU EU Output Power 10W 12W 15W 15W 10W 12W 15W 15W 10W 12W 15W 15W Ripple & Noise (2) Efficiency AC Plug 100mVp-p 150mVp-p 200mVp-p 300mVp-p 100mVp-p 150mVp-p 200mVp-p 300mVp-p 100mVp-p 150mVp-p 200mVp-p 300mVp-p 70% 70% 75% 75% 70% 70% 75% 75% 70% 70% 75% 75% US US US US EU EU EU EU UK UK UK UK Case Type 2 Models Model Number Input Voltage Range Output Voltage (1) 90~264 VAC 3 ~ 5 VDC 6 ~ 9 VDC 10 ~ 15 VDC 16 ~ 24 VDC 3 ~ 5 VDC 6 ~ 9 VDC 10 ~ 15 VDC 16 ~ 24 VDC 3 ~ 5 VDC 6 ~ 9 VDC 10 ~ 15 VDC 16 ~ 24 VDC WMEA1015A2U-vvpp WMEA1015B2U-vvpp WMEA1015C2U-vvpp WMEA1015D2U-vvpp WMEA1015A2E-vvpp WMEA1015B2E-vvpp WMEA1015C2E-vvpp WMEA1015D2E-vvpp WMEA1015A2K-vvpp WMEA1015B2K-vvpp WMEA1015C2K-vvpp WMEA1015D2K-vvpp Output Current 2.5A 2.0A 1.5A 0.9A 2.5A 2.0A 1.5A 0.9A 2.5A 2.0A 1.5A 0.9A NOTES 1. The output voltage is specified as a range (ex: 16~24VDC). The customer must specify what they would like the output voltage set at. 2. Ripple and noise is measured at 20MHz BW with 0.1µF ceramic and 47µF aluminum capacitors in parallel with the output at full load and nominal line. 3. Optional output connectors are available. Please call factory for more details. 4. All safety regulations are listed for reference only. Please call factory for more details. MODEL NUMBER SETUP WMEA1015 Series Designation X Y Output Range Options A 3~5 B 6~9 C 10~15 D 16~24 Z – AC Plug Type Options U US Type E EU Type K UK Type VV PP Specified Output Voltage Connector Type Case Type Options 1 2 09/06/2011 straight type right angle & UK type Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 5 WMEA1015 Series US, UK, and EU Types 10~15W, Single Outputs Wall Mount AC/DC Power Supplies Rev. A MECHANICAL DRAWINGS CASE TYPE 1: STRAIGHT MODELS US Type (Suffix “U”) EU Type (Suffix “E”) Unit: inches (mm) Unit: inches (mm) 1.72±0.06 (43.8±1.5) 1.73±0.06 (44±1.5) 2.35±0.06 (59.8±1.5) 1.17±0.08 (29.7±2) 1.12±0.08 (28.5±2) 3.06±0.06 (77.7±1.5) CASE TYPE 2: RIGHT ANGLE & UK TYPE MODELS US Type (Suffix “U”) EU Type (Suffix “E”) Unit: inches (mm) 1.32±0.08 (33.6±2) 1.25±0.08 (31.85±2) Unit: inches (mm) 2.80±0.06 (71±1.5) 1.87±0.06 (47.5±1.5) 1.87±0.06 (47.5±1.5) 2.80±0.06 (71±1.5) UK Type (Suffix “K”) 3.54±0.4 (90±10) 70.87±2 (1800±50) GND 0.22 (5.5) 1.18±0.2 (30±5) 0.43±0.02 (11±0.5) V+ 2.75±0.2 (70±5) 1.46±0.2 (37±5) 0.08 (2.1) UL2468 #20 1.77±0.2 (45±5) 1.89±0.2 (48±5) Unit: inches (mm) STANDARD DC OUTPUT CABLE 70.87±1.97 (1800±50) 3.54±0.4 (90±10) 3.94±0.8 (100±20) 1.18±0.2 (30±5) 1.18±0.2 (30±5) -Other output cables are available. Please call factory for more details. -All dimensions are for reference only UL SPT-1 *18 09/06/2011 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 5 Rev. A WMEA1015 Series US, UK, and EU Types 10~15W, Single Outputs Wall Mount AC/DC Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 09/06/2011 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 5