35 GHz Emitter VZQ2974A1 DESCRIPTION The model VZQ2974A1 is a self contained 35 GHz Emitter consisting of an air-cooled Extended Interaction Klystron (EIK), power supply modulator, cooling system, input and output RF components, and supporting electronics for control, monitoring and system protection contained in a wheeled cabinet. Remote operation is available through an interface to a laptop computer using the software provided. This equipment comes with a full complement of operating, control and protective equipment and supporting documentation. SPECIFICATIONS Operating Frequency: 35.0 GHz ± 100 MHz 2.0 kW peak Output Power: 1.5 kW at band edges Harmonic Distortion: -20dBc maximum Noise Figure: 35dB maximum Duty Cycle: 10% maximum Pulse Width: Variable; 200nsec to 15 µsec PRF: Variable; 0 to 50kHz RF Output Connection: WR-28 with UG-599/U flange Dimensions: Weight: 55” H x 23” W x 32” D 550 lbs. 220 VAC, 50/60Hz, single phase +5° to +40° Celsius Primary Power: Operating Temperature: FEATURES Internal timing for Pulse width and PRF triggering or remote triggering and synchronization via external TTL inputs. Front panel control or remote control via rear panel mounted, IEEE-488 bus. Internal forced air cooling permitting continuous full power operation. CPI Canada 45 River Drive, Georgetown, Ontario, Canada. L7G2J4 Telephone +1-905-877-0161 e-mail: [email protected] Amplifier Protection: Over-temperature RF output mismatch Waveguide arc Front Panel Fault / Alarm Display: High Reflected Power Waveguide Arc Tube Over-temperature Excessive Duty Cycle Front Panel Gage / LCD or Controller Values: Forward RF Power Reverse RF Power Body Current Cathode Voltage Beam Current Power Supply Temperature RF Frequency RF Attenuator Setting Available accessories: Source oscillator with power and frequency adjustment High power rated bi-directional coupler Integrated dry air pump providing positive air flow within the waveguide. CPI Canada has developed and manufactured millimetre wave klystrons for over 35 years. We specialize in pulsed and CW devices from 17 GHz to 220 GHz. Many of these pulsed or CW EIKs may be configured for use in high power threat emitter service or customized as required. The values listed represent typical performance from testing. Formal controlled specifications, with minimum and maximum values, for use in equipment design, may be obtained from CPI. For more information, please contact your local CPI sales office or CPI Canada. They may be found on our website at www.cpii.com. CPI Canada 45 River Drive, Georgetown, Ontario, Canada. L7G2J4 Telephone +1-905-877-0161 e-mail: [email protected]