EARTH STATION ANTENNA 9.3 Meter ESA Like all ASC Signal earth station antennas, the 9.3 Meter Earth Station Antenna provides high gain and exceptional pattern characteristics. This antenna system is designed to address the stringent requirements of both the television broadcast industry and telecommunications network operators who demand unsurpassed flexibility and electrical performance in high-quality, cost-effective, and reliable packages. The electrical performance and exceptional versatility provides the ability to configure the antenna with your choice of linearly- or circularly- polarized 2- or 4- port combining networks. That versatility is provided at the time of initial purchase, as well as in the future, as your satellite communication requirements evolve. This antenna system is used worldwide in broadcast applications and high density data, voice and communications networks. The ASC Signal 9.3 meter earth station antenna features a computeroptimized dual reflector Gregorian optics system and close-tolerance manufacturing techniques. This combination provides extremely accurate surface contour resulting in exceptionally high gain and closely controlled pattern characteristics. ASC Signal earth station antennas provide maximum durability with minimal maintenance. Features • Rugged aluminum and steel construction • Horizon to horizon coverage with elevation over azimuth mount • Advanced Gregorian optics • Intelsat B compliant 1 PBESA93M.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 9.3 Meter ESA Design Standards Reflector Ground Mount Hardware Mechanical Performances Aluminum painted with highly diffusive white paint Hot-dipped galvanized steel, per ASTM-A123 for structural steel. Sizes ≤ 3/8 in (9.5mm), stainless steel, passivated per MIL-F-14072-E300 Sizes �≥ 3/8 in (9.5mm), hot-dipped galvanized stainless steel, passivated per ASTM-A123 Environmental Performances The 9.3m Antenna mechanical general specifications and performances are listed in below table. Additional information, dimensions and layout may be provided by ASC Signal on a case-by-case basis. Optics Type Dual Reflector Gregorian Reflector Material Reflector Segments Mount Type Precision-Formed Aluminum 20 Az over El, Tripod mount Antenna Pointing Range, Coarse/(Continuous) Elevation: 0-90o (90o) Azimuth: 180o (120o) Polarization 360o (180o) Hub/Enclosure Dimensions Diameter 2.31m (84 in) Depth 1.17m (46 in) Operating Temperature -40 to 52 C (-40 to 125 F) Seismic (Earthquake) 1 G Vertical and Horizontal acceleration. Equivalent to a Richter Magnitude 8.3, and Grade 11 on the modified Mercalli Scale Operational Winds 45 mph (72 km/h) Gusts to 65 mph (105 km/h) Survival Winds 125 mph (200 km/h) in any position of operation Packing Options Standard Commercial Domestic Pack Rain 4 in (102 mm) per hour Solar Radiation 360 BTU/hr/ft2 (1135 Watts/m2) Relative Humidity 100% Ocean Export Pack - For non-containerized, packed for seal against salt water spray Air Export Pack - For freighter aircraft shipments. Lower deck AirPack requires specialized bids Container Packaging Shock and Vibration As encountered by commercial Air, Rail and Truck shipment. Required Shipping Container Standard 20 ft land/sea container Quantity 1 Standard 40 ft land/sea container Quantity 1 Atmospheric Conditions o o o o As encountered by Moderately Corrosive Coastal and Industrial Areas. Shipping Information Included OCEANSHP-LG AIR EXPORT PACK-LG CNTPCK-LG 2 PBESA93M.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation Dimensional Drawings 31.1 ft 9.3m 10.0 FT (3.0 M) Center Position (-60 TO +60) Left Position (-90 TO +30) Right Position (-30 TO +90) E Elevation Pivot Axis D Azimuth Pivot Axis C B 13.7 FT (4.2 M) 19.7 ft r 6m A Total Area Covered 11.8 ft 3.6m Top View 9.3m Component Position vs Elevation Angle 35.0 D 30.0 C 25.0 Height (Ft) EARTH STATION ANTENNA 9.3 Meter ESA 20.0 B 15.0 E 10.0 A 5.0 0.0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 Elevation Angle (deg) 3 PBESA93M.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation Typical Foundation Design 9 ft. 9 in. Typical Foundation Information Note: Crane access is to be provided within 40ft (12m) of PAD #3 (based on 15 ton crane) 9 ft. 9 in. 15ft (4.5m) minimum clearance Assembly area for mount and antenna 9 ft. 9 in. PAD 1 5 ft. 11 in. PAD 3 PAD 2 5 ft. 11 in. 9 ft. 9 in. 2ft (0.6m) minimum clearance 40ft (12m) EARTH STATION ANTENNA 9.3 Meter ESA Azm = Azimuth direction of mount 20ft (6m) minimum clearance 15ft (4.5m) minimum clearance 40ft (12m) 4 ft. 7.5 in. 4 ft. 7.5 in. 30ft (9m) minimum clearance on either side of foundation for crane access 2 ft. 6 in. Foundation information are provided in bulletin 37737C, please contact ASC Signal. Soil Bearing Capacity, 2000 lb/ft2 (9770 kg/m2) Reinforcing Steel, 1.47 Tons (1339 kg) Concrete Compressive 3000 psi (211 kg/cm2 Strength, Foundation Size: (for specific standard soil and typical design) Length 19.5 ft (5.94 m) Width 19.5 ft (5.94 m) Depth 2.5 ft (0.76 m) Concrete Volume 35.2 yd3 (27 m3) NOTE: Other typical foundation designs are available. Soil borings and foundation analysis should be performed by a qualified civil engineer. 4 PBESA93M.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 9.3 Meter ESA Motor Drive Speed Summary Motorization and NGC Options Variable Azimuth Elevation Polarization 0.05o/s 0.05o/s 0.5o/s 0.5o/s 1o/s Motorization One motorization system is available for this antenna: the NGC tracking system that can support Steptrack, Smartrack and Ephemeris orbital tracking. Motor Kit Azimuth/Elevation Motor Kit NGC-MK9 Polarization Drive Kit (DC Step Motors) Standard Temperature (> -20oC) NGC-PK9DRA Low Temperature operation (< -20 C) NGC-PK9DRA-LO o Outdoor Unit Controller Power 200 - 230 VAC, 3 Phase 50/60 Hz NGC-ODU-208-5 Power 380 - 460 VAC, 3 Phase 50/60 Hz NGC-ODU-380-5 Antenna controller, motorization and options are detailed in specific bulletins, please contact ASC Signal.. Antenna Configurations Earth Station Antenna Motorizable Mount with Az/El Jackscrews. ES93-1 Intelsat Standard-B Compliant Earth Station Antenna Motorizable Mount with Az/El Jackscrews. ES93B-1 Indoor NGC-IDU NGC-108 NGC-109 NGC-111 NGC-115 NGC-ULPC-INTFC NGC-ULPC-INTFC-2 NGC-119 NGC Rack Mounted Antenna Controller W/LCD Touch Panel NGC-IDU Analog Telephone Modem NGC-IDU Spectrum Analyzer Card, Analog NGC-IDU DVB Receiver Card NGC IDU, L-Band Internal Beacon Receiver NGC-IDU Emergency Stop Button NGC-IDU 10 Mhz Reference Source NGC-IDU Redundant Power Supply NGC-IDU Rack Slides NGC-IDU Step Tracking Software NGC-IDU Smartrack Software NGC-IDU Predictive Track Software NGC-IDU Full Tracking Capability Software NGC-IDU Remote Access Software Package NGC-IDU Spectrum Analyzer Enhanced User Interface Receive Pattern Test Tool Redundancy Control Software Sand/Dust Deviator Feature Uplink Power Control Software Function Uplink Power Control System Sincle Channel Uplink Power Control System Dual Channel NGC High Availability System Redundancy Software Outdoor NGC-201 NGC-202 NGC-205 NGC-206 NGC-207 NGC-211 NGC-AESC RED11-x RED12-x NGC ODU Low Temperature Kit (-40 C) NGC ODU High Temperature Kit (+60 C) NGC ODU AC Polarization Drive Interface NGC Exterior Emergency Stop Button Pre Movement Alert Warning Light And Announcator Dual Path NGC Redundancy Environmental System Controller Hub Mounted 1:1 LNA/LNB Redundancy Plate Hub Mounted 1:2 LNA/LNB Redundancy Plate NGC-001 NGC-002 NGC-003 NGC-004-02 NGC-006 NGC-007 NGC-008 NGC-009 NGC-101 NGC-102 NGC-103 NGC-104 NGC-106 NGC-107 Antenna controller, motorization and options are detailed in specific bulletins, please contact ASC Signal.. 5 PBESA93M.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 9.3 Meter ESA Feed Matrix C- BAND FEED SYSTEMS 2CLPNC-9 2CPNC-9-109 PORT Co-Pol CP LP X X X 2 2 X 2CPNCR-9-109 2 2CPWCR-9-120 2 2LPNC-9 2 X X 2LPNCR-9 2 X X 2LPUC-9 2 X 2LPWC-9 2 X X 2LPWCR 2 X X 4CPNC-9-206 4 X 4CPNC-9B-206 4 X 4LPNC-9 4 X 4LPWWC-9 4 X X RX 3.625 4.2 GHz X X RX 3.4 - 4.2 GHz RX 4.5 - 4.8 GHz TX 5.850 6.425 GHz X X TX 5.725 6.725 GHz TX 6.725 7.025 GHz X X X X X X X X X X X X X X For redundant application, LNA support kits are available for each of the above feeds. Please contact ASC Signal. 6 PBESA93M.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation EARTH STATION ANTENNA 9.3 Meter ESA Antenna Options and Spares Anchor Bolt and Template Kits Options 201680 Anchor Bolt Kit for 9.3 Meter Earth Station Antennas with Tripod Mounts 205883 Anchor Bolt Template for 9.3 Earth Station Antennas with Tripod Mounts Heating Options FH9A WEC93R-208-100 WEC93R-380-100 C-Band Feed Heater Kit Electric Hot Air De-Ice System, 208 VAC, 3 Phase Electric Hot Air De-Ice System, 380 VAC, 3 Phase Hub Equipment Options EMRGYLT-115 EMRGYLT-230 FV9-115 FV9-220 HUBHTR-230 HUBLCNTR-115/240 HUBLCNTR-230 HUBLT-115 HUBLT-230 Emergency Hub Light Kit, 115 VAC Emergency Hub Light Kit, 230 VAC Fan and Vent Kit, 115 VAC Fan and Vent Kit, 230 VAC Antenna Hub Heater, 230 VAC Hub Power Center, 115/240 VAC Hub Power Center, 230 VAC Hub Light Kit, 115 VAC Hub Light Kit, 230 VAC Safety Options ANTGND-9 LRK9 MANPL9 OBWRNLT-115 OBWRNLT-230 Foundation Installed Grounding Kit Lightning Rod Kit Maintenance Platform and Ladder Kit Obstruction Warning Light Kit, 115VAC Obstruction Warning Light Kit, 230VAC ASC Signal Corporation 1120 Jupiter Road, Suite 102 Plano Texas 75074 USA Phone: +1-214-291-7654 Fax: +1-214-291-7655 www.ascsignal.com [email protected] Other Options 201769 209906-2 223711 BRNG-7693-C FTST NPN-LG SPCOL-FEED TK-MAN-LG TK-MOT-LG Elevation Handwheel Kit (2 required) Lubrication and Maintenance Kit Theodolite Alignment Kit (theodolite not incl) Guard, Feed Window Feed System Testing Custom Color Painting for Reflector Custom Color Painting for Feed Tool Kit, Large Manual Antennas Tool Kit, Large Motorized Antennas Azimuth and Elevation Cross Axis Waveguide Options 1XAC-9 C-Band Cross Axis Waveguide Kit, 2-Port 1XPC-9 C-Band Polarization Waveguide Kit, 2-Port 2XAC-9 C-Band Cross Axis Waveguide Kit, 4-Port 2XPC-9 C-Band Polarization Waveguide Kit, 4-Port 2XPC-9B C-Band Polarization Waveguide Kit, 4-Port for Std “B” Station 7 PBESA93M.B All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0515A) © 2015 ASC Signal Corporation