EARTH STATION ANTENNA 9.4 Meter ESA Like all ASC Signal earth station antennas, the 9.4 Meter Earth Station Antenna provides high gain and exceptional pattern characteristics. This antenna system is designed for worldwide use in C-, Ku-, K- and X- Band Low Pim high density data and communications networks. The electrical performance and exceptional versatility provides the ability to configure the antenna with your choice of linearly- or circularly- polarized 2- or 4- port combining networks. That versatility is provided at the time of initial purchase, as well as in the future, as your satellite communication requirements evolve. This antenna system is used worldwide in broadcast applications and high density data, voice and communications networks. The ASC Signal 9.4 meter earth station antenna features a computeroptimized dual reflector Gregorian optics system and close-tolerance manufacturing techniques. This combination provides extremely accurate surface contour resulting in exceptionally high gain and closely controlled pattern characteristics. ASC Signal earth station antennas provide maximum durability with minimal maintenance. Features • Rugged aluminum and steel construction • Superior Pointing Accuracy • Advanced Gregorian optics • 3 Year Warranty on all Structural Components • Configured for C- Band, X- Band, Ku- Band and K- Band transmit and receive 1 PBESA94M.D All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0316A) © 2016 ASC Signal Corporation EARTH STATION ANTENNA 9.4 Meter ESA Design Standards Reflector Ground Mount Hardware Aluminum painted with highly diffusive white paint Hot-dipped galvanized steel, per ASTM-A123 for structural steel. Sizes ≤ 3/8 in (9.5mm), stainless steel, passivated per MIL-F-14072-E300 Sizes �≥ 3/8 in (9.5mm), hot-dipped galvanized stainless steel, passivated per ASTM-A123 Environmental Performances Operating Temperature -40o to 52oC (-40o to 125oF) Seismic (Earthquake) 1 G Vertical and Horizontal acceleration. Equivalent to a Richter Magnitude 8.3, and Grade 11 on the modified Mercalli Scale Operational Winds Survival Winds 45 mph (72 km/h) Gusts to 65 mph (105 km/h) 125 mph (200 km/h) in any position of operation Rain 4 in (102 mm) per hour Solar Radiation 360 BTU/hr/ft2 (1135 Watts/m2) Relative Humidity 100% Shock and Vibration As encountered by commercial Air, Rail and Truck shipment. Atmospheric Conditions As encountered by Moderately Corrosive Coastal and Industrial Areas. Mechanical Performances The 9.4m Antenna mechanical general specifications and performances are listed in below table. Additional information, dimensions and layout may be provided by ASC Signal on a case-by-case basis. Optics Type Reflector Material Reflector Segments Mount Type Dual Reflector Gregorian Precision-Formed Aluminum 20 El over Az, Pedestal Mount Antenna Pointing Range, Coarse/(Continuous) Elevation: 0-90o (90o) Azimuth: 210o (120o) Polarization 180o (180o) Hub/Enclosure Dimensions Diameter Depth 2.14m (84 in) 1.22m (48 in) Shipping Information Packing Options Standard Commercial Domestic Pack Ocean Export Pack - For non-containerized, packed for seal against salt water spray Air Export Pack - For freighter aircraft shipments. Lower deck AirPack requires specialized bids Container Packaging Required Shipping Container Standard 20 ft land/sea container Standard 40 ft land/sea container Included OCEANSHP-LG AIR EXPORT PACK-LG CNTPCK-LG Quantity 1 Quantity 1 Shipping container information is given for basic configuration and may vary depending on the selected options, please contact ASC Signal for specific container loading plan. 2 PBESA94M.D All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0316A) © 2016 ASC Signal Corporation Dimensional Drawings 9.4 m 9.4 Meter Earth Station Antenna (Pedestal Mount) Center Position (-60° TO +60°) A = Lower Rim Height B = Vertex Center Height C = Subreflector Strut Tip Height E = Rim Extension El = Elevation Angle Left Position (-105° TO +15°) Right Position (-15° TO +105°) El 20 ft r 6.1 m Azimuth Pivot Axis Azimuth Swing Radius 15 ft (4.6 m) D B/C Total Area Covered A E 90 80 Elevation Angle (Degree) EARTH STATION ANTENNA 9.4 Meter ESA 70 B 60 A 50 E 40 C D 30 20 10 0 0 5 10 15 20 25 Dimension (Feet) 30 35 40 3 PBESA94M.D All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0316A) © 2016 ASC Signal Corporation Typical Foundation Design 135 in. Typical Foundation Information Note: Crane access is to be provided within 40ft (12m) of pads (based on 15 ton crane) 135 in. 15ft (4.5m) minimum clearance Assembly area for mount and antenna 135 in. Left pad Column base 60 in. Azm = Azimuth direction of mount Right pad 60 in. 135 in. 2ft (0.6m) minimum clearance 40ft (12m) EARTH STATION ANTENNA 9.4 Meter ESA 20ft (6m) minimum clearance 15ft (4.5m) minimum clearance 40ft (12m) 30ft (9m) minimum clearance on either side of foundation for crane access 74.2 in. 103.9 in. 30 in. Foundation information are provided in bulletin 237742, please contact ASC Signal. Soil Bearing Capacity, 2000 lb/ft2 (9770 kg/m2) Reinforcing Steel, 2.93 tons (2660 kg) Concrete Compressive 3000 psi (211 kg/cm2) Strength, Foundation Size: (for specific standard soil and typical design) Length 22.5 ft (6.86 m) Width 22.5 ft (6.86 m) Depth 2.5 ft (0.76 m) Concrete Volume 46.9 yd3 (35.86 m3) NOTE: Other typical foundation designs are available. Soil borings and foundation analysis should be performed by a qualified civil engineer. 4 PBESA94M.D All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0316A) © 2016 ASC Signal Corporation EARTH STATION ANTENNA 9.4 Meter ESA Motor Drive Speed Summary Motorization and NGC Options Variable Azimuth Elevation Polarization 0.05o/s 0.05o/s 0.5o/s 0.5o/s 1o/s Motorization One motorization system is available for this antenna: the NGC tracking system that can support Steptrack, Smartrack and Ephemeris orbital tracking. Motor Kit Azimuth/Elevation Motor Kit NGC-MK94 Polarization Drive Kit (DC Step Motors) Standard Temperature (> -20oC) Low Temperature operation (< -20oC) NGC-PK9DRA NGC-PK9DRA-LO Outdoor Unit Controller (Tracking) Power 200 - 230 VAC, 3 Phase 50/60 Hz Power 380 - 460 VAC, 3 Phase 50/60 Hz NGC-ODU-208-5 NGC-ODU-380-5 Antenna controller, motorization and options are detailed in specific bulletins, please contact ASC Signal.. Antenna Configuration Earth Station Antennas Motorizable Mount with Az/El Jackscrews. ES94K-1 Indoor NGC-IDU NGC-108 NGC-109 NGC-111 NGC-115 NGC-ULPC-INTFC NGC-ULPC-INTFC-2 NGC-119 NGC Rack Mounted Antenna Controller W/LCD Touch Panel NGC-IDU Analog Telephone Modem NGC-IDU Spectrum Analyzer Card, Analog NGC-IDU DVB Receiver Card NGC IDU, L-Band Internal Beacon Receiver NGC-IDU Emergency Stop Button NGC-IDU 10 Mhz Reference Source NGC-IDU Redundant Power Supply NGC-IDU Rack Slides NGC-IDU Step Tracking Software NGC-IDU Smartrack Software NGC-IDU Predictive Track Software NGC-IDU Full Tracking Capability Software NGC-IDU Remote Access Software Package NGC-IDU Spectrum Analyzer Enhanced User Interface Receive Pattern Test Tool Redundancy Control Software Sand/Dust Deviator Feature Uplink Power Control Software Function Uplink Power Control System Sincle Channel Uplink Power Control System Dual Channel NGC High Availability System Redundancy Software Outdoor NGC-201 NGC-202 NGC-205 NGC-206 NGC-207 NGC-211 NGC-AESC RED11-x RED12-x NGC ODU Low Temperature Kit (-40 C) NGC ODU High Temperature Kit (+60 C) NGC ODU AC Polarization Drive Interface NGC Exterior Emergency Stop Button Pre Movement Alert Warning Light And Announcator Dual Path NGC Redundancy Environmental System Controller Hub Mounted 1:1 LNA/LNB Redundancy Plate Hub Mounted 1:2 LNA/LNB Redundancy Plate NGC-001 NGC-002 NGC-003 NGC-004-02 NGC-006 NGC-007 NGC-008 NGC-009 NGC-101 NGC-102 NGC-103 NGC-104 NGC-106 NGC-107 Antenna controller, motorization and options are detailed in specific bulletins, please contact ASC Signal.. 5 PBESA94M.D All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0316A) © 2016 ASC Signal Corporation EARTH STATION ANTENNA 9.4 Meter ESA Feed Matrix C- BAND FEED SYSTEMS 2CPWCR-94-206 4CPNC-94-206 4CPWC-94 4LPNC-94 4LPWWC-94 PORT Co-Pol CP LP X- BAND FEED SYSTEMS 2CPX-94 4CPX-94 2CPMX-94 4CPMX-94 PORT CP LOW PIM 2 4 2 4 X X X X X X Ku- BAND FEED SYSTEMS 2LPKU-94 PORT LP RX 3.625 4.2 GHz X X X 2 4 4 4 4 RX 7.25 7.75 GHz X X X X TX 7.9 8.4 GHz X X X X RX 10.7 11.7 GHz X 2 X X 4LPKU-94-1 4 X X 4LPKU-94-2 4 X 4LPKU-94-4 4 X 4LPKU-94-6 4 X PORT CP X TX 12.7513.25 GHz TX 12.75 14.5 GHz TX 13.0 14.5 GHz TX 13.7514.5 GHz TX 13.7514.8 GHz X X X X X X X X X X TX 6.725 7.025 GHz X X X TX 5.725 6.725 GHz X X 2 4 4 RX 10.7 12.5 GHz LP TX 5.850 -6.725 GHz X X 2LPKUR-94-W 4LPKK-94 4CPKK-94 TX 5.850 6.425 GHz X X X 2 RX 4.5 4.8 GHz X RX 10.7 12.75 GHz X K- BAND FEED SYSTEMS 2LPKK-94 RX 3.4 4.2 GHz X RX 10.7 12.75 GHz X TX 17.3 18.4 GHz X X X X X For redundant application, LNA support kits are available for each of the above feeds. Please contact ASC Signal. 6 PBESA94M.D All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0316A) © 2016 ASC Signal Corporation EARTH STATION ANTENNA 9.4 Meter ESA Antenna Options and Spares Anchor Bolt and Template Kits Options Hub Equipment Options 303410 Anchor Bolt Template Kit EMRGYLT-115 Emergency Hub Light Kit, 115 VAC 175370 Foundation Kit EMRGYLT-230 Emergency Hub Light Kit, 230 VAC FV8HV2-115 Fan Vent Kit, 2 Louvers. 115 VAC FV8HV2-230 Fan Vent Kit, 2 Louvers. 230 VAC FV8HV4-115 Fan Vent Kit, 4 Louvers. 115 VAC FV8HV4-230 Fan Vent Kit, 4 Louvers. 230 VAC HUBHTR-230 Antenna Hub Heater, 230 VAC HUBLCNTR-115/240 Hub Power Center, 115/240 VAC HUBLCNTR-230 Hub Power Center, 230 VAC HUBLT-115 Hub Light Kit, 115 VAC HUBLT-230 Hub Light Kit, 230 VAC Azimuth and Elevation Cross Axis Waveguide Options XAPKK-94 XAPKK-94-UPG XAPKU-94 XAPKU-94-UPG K-Band cross Axis and Polarization Axis Waveguide Kit. K-Band Cross Axis and Polarization Axis Waveguide Kit Upgrade.Upgrades XAPKK-49 for use with 4-port K-Band Feeds. Ku-Band Cross Axis and Polarization Axis Waveguide Kit. Single run for 2-Port Ku-Band Feeds. Ku-Band Cross Axis and Polarization Axis Waveguide Kit Upgrade. Upgrades XAPKU-49 for use with 4-Port Ku-Band Feeds. Provides Additional Waveguide Run. Heating Options FH5A Ku and K-Band Feed Heater WEC94R-208-100 Electric Hot Air De-Ice System, 208 VAC, 3 Phase (not for Ka band) Electric Hot Air De-Ice System, 380 VAC, 3 Phase (not for Ka band) WEC94R-380-100 Safety Options ANTGND-9 Foundation Installed Grounding Kit LRK9 Lightning Rod Kit MANPL94 Maintenance Platform and Ladder Kit OBWRNLT-115 Obstruction Warning Light Kit, 115VAC OBWRNLT-230 Obstruction Warning Light Kit, 230VAC Other Options 209906-2 Lubrication and Maintenance Kit BRNG-76-KU Guard, Feed Window Ku-band FTST Feed System Testing TK-MAN-LG Tool Kit, Large Manual Antennas TK-MOT-LG Tool Kit, Large Motorized Antennas Environment Systems Options ASC Signal Corporation 1120 Jupiter Road, Suite 102 Plano Texas 75074 USA Phone: +1-214-291-7654 Fax: +1-214-291-7655 www.ascsignal.com [email protected] PDKU-94-208 Precipitation Deviator, 208/230 VAC. PDKU-94-380 Precipitation Deviator, 380/415 VAC. 7 PBESA94M.D All designs, specifications, and availabilities of products and services presented in this bulletin are subject to change without notice. (0316A) © 2016 ASC Signal Corporation