Transient Voltage Suppression Diodes Axial Leaded – 10kA > AK10 series AK10 Series RoHS Pb e4 Description The AK10 series of high power TVS diode is specially designed for meeting severe surge test environment of both AC and DC line protection applications. It features a very fast response and ultra low clamping characteristics over traditional metal oxide ( MOV ) solutions. They can be connected in series and / or parallel to create a very high surge current protection solution. Features Agency Approvals AGENCY • Very low clamping voltage • Ultra compact: less than one-tenth the size of traditional discrete solutions •Sharp breakdown voltage • Low slope resistance • Bi-directional • Foldbak technology for superior clamping factor • Symmetric in leads width for easier soldering during assembly. AGENCY FILE NUMBER E128662 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Operating Storage Temperature Range Symbol Value Unit TSTG -55 to 150 °C Operating Junction Temperature Range TJ -55 to 125 ºC Current Rating1 IPP 10 kA Note: 1. Rated IPP measured with 8/20μS pulse. Functional Diagram • IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Halogen-free • RoHS compliant • Glass passivated junction • Pb-free E4 means 2nd level interconnect is Pb-free and the terminal finish material is silver Additional Infomarion Bi-direcctional Datasheet Resources Samples Electrical Characteristics (T =25°C unless otherwise noted) A Part Numbers AK10 - 015C AK10 - 030C AK10 - 058C AK10 - 066C AK10 - 076C AK10 - 170C AK10 - 190C AK10 - 240C AK10 - 380C AK10 - 430C AK10 - 530C Max. Typical Standoff Reverse IR @ Part Voltage Leakage Marking (VSO) 85OC (IR) @VSO Volts (µA) µA 10 - 015C 10 - 030C 10 - 058C 10 - 066C 10 - 076C 10 - 170C 10 - 190C 10 - 240C 10 - 380C 10 - 430C 10 - 530C 15 30 58 66 76 170 190 240 380 430 530 10 10 10 10 10 10 10 10 10 10 10 Note: Using 8/20µS wave shaped defined in IEC 61000-4-5. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 15 15 15 15 15 15 15 15 15 15 15 Test Reverse Breakdown Current Voltage (VBR) @ IT IT Min Volts Max Volts 16 32 64 72 85 180 200 250 401 440 560 19 37 70 80 95 220 245 285 443 490 619 Max. Clamping Max. Temp Max. Agency Voltage Coefficient Capacitance Approval VCL @ Peak Pulse of VBR 0 Bias 10kHz Current (IPP) (Note 1) (mA) VCL Volts IPP Amps (%/OC) (nF) 10 10 10 10 10 10 10 10 10 10 10 28 58 110 120 140 260 290 340 520 625 750 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 12.0 11.0 6.5 6.5 6.5 2.8 2.5 2.2 2.0 1.4 1.0 X X X X X X X X X X Transient Voltage Suppression Diodes Axial Leaded – 10kA > AK10 series Flow/Wave Soldering (Solder Dipping) Physical Specifications Contact manufacturer Weight Case Epoxy encapsulated Terminal Silver plated leads, solderable per MIL-STD-750 Method 2026 Peak Temperature : 265OC Dipping Time : 10 seconds Soldering : 1 time Wave Solder Profile Figure 1 - Non Lead-free Profile Figure 2 - Lead-free Profile 300 300 250 250 TEMPERATURE (ºC) TEMPERATURE (ºC) Maximum Wave 260C Maximum Wave 240C 200 150 100 50 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 3.5 0 4 0 TIME(MINUTES) 0.5 1 1.5 2 2.5 3 3.5 4 TIME(MINUTES) Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 4 - Surge Response 100 80 Current (kA) Percent of Rated Value Figure 3 - Peak Power Derating 60 40 20 0 0 25 50 75 100 TJ - Initial Junction Temperature (ºC) 125 Voltage (V) continues on next page. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Transient Voltage Suppression Diodes Axial Leaded – 10kA > AK10 series Ratings and Characteristic Curves (T =25°C unless otherwise noted) (Continued) A Figure 5 - Typical Peak Pulse Power Rating Curve Figure 6 - Typical VBR Vs Junction Temperature 100000 12 10 10000 Percent of VBR Change PPPM-Peak Pulse Power (kW) AK10-430C 8/20µs 1000 10/350µs 100 AK10-076C 10/1000µs 10 8 6 4 2 0 -2 -4 -6 -8 1 0.00001 0.0001 -50 0.001 -25 0 25 50 75 100 125 Junction Temperature(Tj ) td-Pulse Width (sec.) Figure 7 - Surge Response (8/20 Surge current waveform) Figure 8 - Pulse Waveform IPP – Peak Pulse Current – %IPP Voltage Current Time (µs) Note: The power dissipation causes a change in avalanche voltage during the surge and the avalanche voltage eventually returns to the original value when the transient has passed. Peak Value 100 tr = rise time to peak value td = decay time to half value tr x td =8/20µs 50 Half Value 0 0 tr td t – Time (µs) Dimensions A G L2 F L1 D C B C E Dimensions Inches Millimeters A A - 530C B C D E F G - 015C G - 030C 0.950 +/- 0.04 1.370 +/- 0.08 0.095 +/- 0.024 0.236 +/- 0.04 0.570 max. 0.050 +/- 0.002 0.500 max. 0.142 +/- 0.04 0.167 +/- 0.04 24.15 +/- 1.00 34.70 +/- 2.00 2.4 +/- 0.60 6.00 +/- 1.00 14.48 max. 1.270 +/- 0.05 12.70 max. 3.60 +/- 1.00 4.23 +/- 1.00 G - 058C/066C/076C 0.200 +/- 0.04 5.08 +/- 1.00 G - 170C/190C G - 240C G - 380C/430C G - 530C L1/L2 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 0.362 +/- 0.04 9.2 +/- 1.00 0.420 +/- 0.04 10.67 +/- 1.00 0.650 +/- 0.04 16.50 +/- 1.00 1.060 +/- 0.06 27.00 +/- 1.50 L1= L2 tolerance +/- 0.04 inch (1.0 mm) Transient Voltage Suppression Diodes Axial Leaded – 10kA > AK10 series Part Marking System LF YWW Littelfuse Logo Trace Code Marking Trace Code Marking Y:Year Code WW: Working Week Code Part Marking Y:Year Code WW: Working Week Code Type 1 - Side View Type 2- Top View Packing Options Part Numbering System AK10 XXXX Series Type Apply to P/N listed below: AK10-170C AK10-190C AK10-240C AK10-380C AK10-430C AK10-530C 10-xxxx 10-XXXX Littelfuse Logo LF YWW Apply to P/N listed below: AK10-015C AK10-030C AK10-058C AK10-066C AK10-076C Part Marking Stand Off Voltage (Please Refer to Electrical Characteristics Chart) Part Number Component Package Quantity Packaging Option AK10XXXX AK Package 56pcs/Box Bulk AK10-XXXX-12 AK Package 12pcs/Box Bulk © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15