Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series LCE Series RoHS Pb e3 Description Uni-directional The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.1) (Note 1) Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC (Fig. 5) Operating Junction and Storage Temperature Range Symbol Value Unit PPPM 1500 W PD 6.5 W TJ , TSTG -65 to 175 °C Note: 1. Non-repetitive current pulse , per Fig. 3 and derated above TJ (initial) = 25OC per Fig. 2. • 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Glass passivated chip junction in DO-201 Package • Fast response time: typically less than 1.0ps from 0 Volts to BV min • Excellent clamping capability • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) •E SD protection of data lines in accordance with IEC 61000-4-2 •E FT protection of data lines in accordance with IEC 61000-4-4 • Low incremental surge resistance • High temperature to reflow soldering guaranteed: 260°C/40sec / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension • Plastic package is flammability rated V-0 per Underwriters Laboratories • Matte tin lead–free plated • Ideal for data line applications • Halogen free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) Applications Additional Infomarion TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Datasheet Resources © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Samples Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series Electrical Characteristics (T =25°C unless otherwise noted) A Breakdown Voltage VBR (V) Part Number Reverse Stand off Voltage VR (V) MIN MAX LCE6.5A LCE7.0A LCE7.5A LCE8.0A LCE8.5A LCE9.0A LCE10A LCE11A LCE12A LCE13A LCE14A LCE15A LCE16A LCE17A LCE18A LCE20A LCE22A LCE24A LCE26A LCE28A LCE30A LCE33A LCE36A LCE40A LCE43A LCE45A LCE48A LCE51A LCE54A LCE58A LCE60A LCE64A LCE70A LCE75A LCE85A LCE90A 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 85.0 90.0 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 94.40 100.00 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 104.00 111.00 Test Current IT (mA) 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Maximum Maximum Maximum Clamping Peak Pulse Reverse Junction Current Voltage Leakage Capacitance (Fig.3) at Ipp IR @ VR @ 0 Volts IPPM (A) VC (V) (pF) (µA) 1000 500 250 100 50 10 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.5 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 129.0 146.0 100.0 100.0 100.0 100.0 100.0 97.0 88.0 82.0 75.0 70.0 65.0 61.0 57.0 54.0 51.0 46.0 42.0 39.0 36.0 33.0 31.0 28.1 25.8 23.3 21.6 20.6 19.4 18.2 17.2 16.0 15.5 14.6 13.3 12.4 11.6 10.3 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Working Inverse Blocking Voltage VWIB (V) 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 100 100 100 100 125 125 125 125 Inverse Peak Blocking Leakage Inverse Current at Blocking IIB @ VWIB Voltage VPIB (V) (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 125 125 125 125 150 150 150 150 Agency Approval X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: For parts without A, the VBR is ±10% and VC is 5% higher than with A parts. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - Peak Pulse Power Rating Figure 2 - Peak Pulse Power Derating Curve 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % PPPM - Peak Pulse Power (kW) 1000 100 10 1 0.1 0.000001 0.00001 0.0001 0.001 td-Pluse Width (Sec.) Figure 3 - Pulse Waveform 80 60 40 20 0 0 25 50 75 100 125 150 TJ - Initial Junction Temperature (ºC) Figure 4 - AC Line Protection Application IPPM- Peak Pulse Current, % IRSM 150 tr=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 0 10/1000µsec. Waveform as defined by R.E.A Low Capacitance TVC td 0 1.0 2.0 t-Time (ms) © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 3.0 4.0 Application Note: Device must be used with two units in parrellel, opposite in polarity as shown on circuit for AC signal lin protection. 175 Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series Soldering Parameters Lead–free assembly Reflow Condition - Temperature Min (Ts(min)) 150°C Ramp-up TL - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TA) to peak 3°C/second max TS(max) to TA - Ramp-up Rate 3°C/second max Reflow Temperature (T) Pre Heat tp TP tL Ts(max) Ramp-down Ts(min) ts Preheat 25˚C - Temperature (TA) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Critical Zone TL to TP t 25˚C to Peak Time (t) Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Flow/Wave Soldering (Solder Dipping) Ramp-down Rate 6°C/second max Peak Temperature : 265OC Time 25°C to peak Temperature (TP) 8 minutes Max. Dipping Time : 10 seconds Do not exceed 260°C Soldering : 1 time Environmental Specifications Physical Specifications Weight 0.045oz., 1.2g High Temp. Storage JESD22-A103 Case JEDEC DO-201 molded plastic body over passivated junction. HTRB JESD22-A108 Polarity Color band denotes the cathode except Bipolar. Temperature Cycling JESD22-A104 Terminal Matte Tin axial leads, solderable per JESD22-B102. H3TRB JESD22-A101 RSH JESD22-B106 Dimensions Dimensions D C A B A A Inches Millimeters Min Max Min Max 1.000 - 25.40 - B 0.285 0.375 7.20 9.50 C 0.038 0.042 0.96 1.07 D 0.190 0.210 4.80 5.30 DO-201 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Transient Voltage Suppression Diodes Axial Leaded – 1500W > LCE series Part Numbering System Part Marking System OPTION CODE: BLANK Reel Tape -B Bulk Packaging Cathode Band F LCE xxx A X YYWW Littelfuse Logo TYPE CODE: A Uni-Directional (5% VBR Voltage Tolerance) VR VOLTAGE CODE (Refer to the Electrical Characteristics table) Trace Code Marking LCEXXX Product Type SERIES CODE Packaging Component Package Quantity Packaging Option LCExxxXX DO-201 1200 Tape & Reel EIA STD RS-296 LCExxxXX-B DO-201 500 BULK Littelfuse Spec. Part Number YY:Year Code WW: Week Code Packaging Specification Schematic Transient Voltage Suppressor Diode Tape and Reel Specification Off Center either side 2.063+0.079/-0.039 (53.0+2.0/-1.0) 0.028(0.7) 2.56 (65.0) 0.047 (1.2) 0.394+/-0.020 (10.0+/-0.5) 13.0 (330.2) 0.236 (6.0) Dimensions are in inches/mm 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Recess Depth Max. 0.75 (19.05) © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Direction of Feed