DA221M Diodes Switching diode DA221M zApplication Ultra high speed switching zDimensions (Unit : mm) zLand size figure (Unit : mm) 㪇㪅㪏 r r zFeatures 1) Ultra small mold type. (VMD3) 2) High reliability. 㪇㪅㪋㪌 r 㪇㪅㪌 㪈㪅㪈㪌 㪇㪅㪋㪌 r r 㪇㪅㪋 㪇䌾㪇㪅㪈 㪇㪅㪋 zConstruction Silicon epitaxial planar 㪇㪅㪉㪉㫧㪇㪅㪇㪌 㪇㪅㪉㪉㫧㪇㪅㪇㪌 㪭㪤㪛㪊 r zStructure 㩷 (1)D1:A (2)D2:C (3)D1:C 䇭 D2:A 㪩㪦㪟㪤㩷㪑㩷㪭㪤㪛㪊 㪻㫆㫋㩷㩿㫐㪼㪸㫉㩷㫎㪼㪼㫂㩷㪽㪸㪺㫋㫆㫉㫐㪀 zTaping specifications (Unit : mm) 㪇㪅㪊㫧㪇㪅㪈 㪉㪅㪇㫧㪇㪅㪇㪋 㱢㪈㪅㪌㪌㫧㪇㪅㪇㪌 㱢㪇㪅㪌㫧㪇㪅㪇㪌 㩿㪋㪅㪇㫧㪇㪅㪈㪀 㪈㪅㪊㫧㪇㪅㪇㪌 䇭䇭䇭㩷㪇 zAbsolute maximum ratings (Ta=25qC) Parameter Symbol VRM Reverse voltage (repetitive peak) VR Reverse voltage (DC) I Forward current surge peak̈́singleͅ FM Average rectified forward currenẗ́singleͅ Io Isurge Surge current䋨t=1us䋩 (single) Power dissipation Pd Junction temperature Tj Storage temperature Tstg 㪉㪅㪇㫧㪇㪅㪇㪌 Limits 20 20 200 100 300 150 150 -55 to +150 㪏㪅㪇㫧㪇㪅㪈 㪌㪅㪌㫧㪇㪅㪉 㪇䌾㪇㪅㪈 㪈㪅㪊㪌㫧㪇㪅㪇㪌 㩷㩷䇭㪇 㪊㪅㪌㫧㪇㪅㪇㪌 㪈㪅㪎㪌㫧㪇㪅㪇㪎 㪋㪅㪇㫧㪇㪅㪇㪎 㪇㪅㪍㫧㪇㪅㪇㪌 㩷㩷㩷㩷㩷㩷㩷㪇 Unit V V mA mA mA mW 㷄 㷄 zElectrical characteristics (Ta=25qC) Parameter Forward voltage Reverse current Capacitance between terminals Symbol VF IR Min. - Typ. - Max. 1.0 0.1 Unit V μA Ct - - 3.0 pF Conditions IF=10mA VR=15V VR=6V , f=1MHz Rev.C 1/3 DA221M Diodes zElectrical characteristic curves (Ta=25qC) 㪈㪇㪇 㪈㪇㪇 㪫㪸㪔㪄㪉㪌㷄 㪈 㪫㪸㪔㪎㪌㷄 㪈㪇 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪈㪌㪇㷄 㪈 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪈 㪇㪅㪈 㪇 㪈㪇㪇 㪉㪇㪇 㪊㪇㪇 㪋㪇㪇 㪌㪇㪇 㪍㪇㪇 㪎㪇㪇 㪏㪇㪇 㪐㪇㪇 㪈㪇㪇㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪝㩿㫄㪭㪀 㪭㪝㪄㪠㪝㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪫㪸㪔㪎㪌㷄 㪫㪸㪔㪉㪌㷄 㪇㪅㪈 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪇㪇㪈 㪌 㪈㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪌 㪎㪇㪇 㪍㪐㪇 㪏㪍㪇 㪏㪌㪇 㪏㪋㪇 㪏㪊㪇 㪉 㪘㪭㪜㪑㪇㪅㪍㪉㪇㫅㪘 㪇㪅㪎 㪇㪅㪍 㪇㪅㪌 㪇㪅㪋 㪘㪭㪜㪑㪇㪅㪈㪇㪍㪌㫅㪘 㪇㪅㪊 㪇㪅㪉 㪌 㪛㪈 㪍 㪌 㪋 㪊 㪘㪭㪜㪑㪈㪅㪏㪌㫇㪝 㪉 㪈 㪇 㪇 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪈㪌㪭 㫅㪔㪊㪇㫇㪺㫊 㪛㪈 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪍㪭 㪽㪔㪈㪤㪟㫑 㫅㪔㪈㪇㫇㪺㫊 㪎 㪈 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪇㪅㪏 㪇 㪩㪜㪪㪜㪩㪭㪜㩷㪩㪜㪚㪦㪭㪜㪩㪰㩷㪫㪠㪤㪜㪑㫋㫉㫉㩿㫅㫊㪀 㪋 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪌 㪏 㪈㪌 㪇㪅㪈 㪈㪇 㪐 㪈㪇 㪇㪅㪐 㪭㪝㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪈㪌㪭 㫅㪔㪊㪇㫇㪺㫊 㪍 㪌 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪘㪭㪜㪑㪏㪋㪐㪅㪎㫄㪭 㪈㪇 㪊 㪇 㪈 㪫㪸㪔㪉㪌㷄 㪠㪝㪔㪈㪇㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪛㪉 㪭㪝㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪎 㪈 㪈㪌 㪏㪉㪇 㪛㪉 㪛㪉 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪘㪭㪜㪑㪎㪇㪐㪅㪏㫄㪭 㪍㪏㪇 㪏 㪈㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪎㪈㪇 㪐 㪽㪔㪈㪤㪟㫑 㪏㪎㪇 㪛㪈 㪈㪌 㪇㪅㪈 㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪝㩿㫄㪭㪀 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪝㩿㫄㪭㪀 㪎㪉㪇 㪈㪇 㪈㪇 㪈 㪈㪌 㪎㪊㪇 㪫㪸㪔㪉㪌㷄 㪠㪝㪔㪈㪇㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪌 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪇㪅㪈 㪇 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪇㪈 㪽㪔㪈㪤㪟㫑 㪛㪈 㪈 㪛㪉 㪫㪸㪔㪉㪌㷄 㪇㪅㪈 㪇 㪈㪇 㪫㪸㪔㪈㪉㪌㷄 㪈㪇 㪇㪅㪇㪈 㪫㪸㪔㪎㪌㷄 㪛㪈 㪈 㪇㪅㪇㪇㪈 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪫㪸㪔㪈㪌㪇㷄 㪈㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪝㩿㫄㪭㪀 㪭㪝㪄㪠㪝㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪈㪇㪇 㪈㪇㪇 㪉㪇㪇 㪊㪇㪇 㪋㪇㪇 㪌㪇㪇 㪍㪇㪇 㪎㪇㪇 㪏㪇㪇 㪐㪇㪇 㪈㪇㪇 㪈㪈㪇 㪇 㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪈㪌㪇㷄 㪇 㪫㪸㪔㪈㪉㪌㷄 㪛㪉 㪫㪸㪔㪈㪉㪌㷄 㪈㪇 㪫㪸㪔㪈㪌㪇㷄 㪈㪇㪇 㪫㪸㪔㪎㪌㷄 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㩿㫄㪘㪀 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㩿㫄㪘㪀 㪛㪈 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪍㪭 㪠㪝㪔㪈㪇㫄㪘 㪩㪣㪔㪈㪇㪇㱅 㪠㫉㫉㪔㪇㪅㪈㪁㪠㪩 㫅㪔㪈㪇㫇㪺㫊 㪛㪈 㪋 㪊 㪉 㪈 㪘㪭㪜㪑㪈㪅㪉㪇㫅㫊 㪇 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㫋㫉㫉㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 Rev.C 2/3 DA221M Diodes 㪩㫋㪿㩿㫁㪄㪺㪀 㪤㫆㫌㫅㫋㪼㪻㩷㫆㫅㩷㪼㫇㫆㫏㫐㩷㪹㫆㪸㫉㪻 㪠㪤㪔㪈㫄㪘 㪈㪇 㪈㫄㫊 㪠㪝㪔㪈㪇㫄㪘 㫋㫀㫄㪼 㪋㪅㪌 㪊㪅㪌 㪊 㪉㪅㪌 㪘㪭㪜㪑㪇㪅㪊㪊㫂㪭 㪘㪭㪜㪑㪇㪅㪐㪍㫂㪭 㪉 㪈㪅㪌 㪈 㪇 㪈㪇 㪫㪠㪤㪜㪑㫋㩿㫊㪀 㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪐 㪋 㪇㪅㪌 㪊㪇㪇㫌㫊 㪇㪅㪈 㪛㪈 㪈㪇㪇㪇 㪚㪔㪉㪇㪇㫇㪝 㪩㪔㪇㱅 㪚㪔㪈㪇㪇㫇㪝 㪩㪔㪈㪅㪌㫂㱅 㪜㪪㪛㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪜㪣㪜㪚㪫㪩㪦㪪㪫㪘㪫㪠㪚 㪛㪛㪠㪪㪚㪟㪘㪩㪞㪜㩷㪫㪜㪪㪫㩷㪜㪪㪛㩿㪢㪭㪀 㪈㪇㪇 㪈 㪇㪅㪇㪇㪈 㪈㪇 㪌 㪩㫋㪿㩿㫁㪄㪸㪀 㪜㪣㪜㪚㪫㪩㪦㪪㪫㪘㪫㪠㪚 㪛㪛㪠㪪㪚㪟㪘㪩㪞㪜㩷㪫㪜㪪㪫㩷㪜㪪㪛㩿㪢㪭㪀 㪫㪩㪘㪥㪪㪠㪜㪥㪫 㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪈㪇㪇㪇 㪛㪉 㪏 㪎 㪍 㪌 㪋 㪊 㪘㪭㪜㪑㪌㪅㪇㪍㫂㪭 㪘㪭㪜㪑㪈㪅㪉㪎㫂㪭 㪉 㪈 㪇 㪚㪔㪉㪇㪇㫇㪝 㪩㪔㪇㱅 㪚㪔㪈㪇㪇㫇㪝 㪩㪔㪈㪅㪌㫂㱅 㪜㪪㪛㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 Rev.C 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0