RN142ZS8A Diodes PIN Diode RN142ZS8A z Land size figure (Unit : mm) z Dimensions (Unit : mm) z Applications High frequency switching 㪈㪅㪍㫧㪇㪅㪇㪌 㪇㪅㪊 㪇㪅㪏㫧㪇㪅㪇㪌 z Features 1) Ultra small mold typë́HMD8ͅ 2) Low high-frequency forward resistance (rF) / low capacitance (CT). 㪇㪅㪋 㪇㪅㪊㫧㪇㪅㪇㪊 㪇䌾㪇㪅㪇㪊 㪘㩷㪘 㪇㪅㪋㫧㪇㪅㪇㪊 㪇㪅㪌㫧㪇㪅㪇㪊 㪇㪅㪉㪊㫧㪇㪅㪇㪊 㪇㪅㪈㪏㫧㪇㪅㪇㪊 z Construction Silicon epitaxial planar 㪟㪤㪛㪏 㪩㪦㪟㪤㩷㪑㩷㪟㪤㪛㪏 㪡㪜㪛㪜㪚㩷㪑㩷㪄 㪡㪜㪠㪫㪘㩷㪑㩷㩷㪄 㪻㫆㫋 㩿㫐㪼㪸㫉㩷㫎㪼㪼㫂㩷㪽㪸㪺㫋㫆㫉㫐㪀 㪇㪅㪉㪌 z Structure z Taping specifications (Unit : mm) z Absolute maximum ratings (Ta=25qC) Parameter Symbol VR Reverse voltage (DC) IF Forward current(DC) Junction temperature Tj Storage temperature Tstg Limits 30 50 150 -55 to +150 Unit V mA 㷄 㷄 z Electrical characteristic (Ta=25qC) Parameter Symbol VF Min. - Typ. - Reverse current IR - Capacitance between terminals Ct - Rf Rf Forward voltage Forward resistance Max. 1.0 Unit V IF=10mA Conditions - 0.1 μA VR=30V - 0.45 pF VR=1.0V , f=1MHz - - 1.5 㱅 - - 2.5 㱅 IF=10mA,f=100MHz IF=3mA,f=100MHz 1/2 RN142ZS8A Diodes z Electrical characteristic curves 㪈㪇㪇 㪈㪇㪇㪇 㪈㪇 㪫㪸㪔㪈㪌㪇㷄 㪽㪔㪈㪤㪟㫑 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪎㪌㷄 㪫㪸㪔㪉㪌㷄 㪈 㪫㪸㪔㪄㪉㪌㷄 㪈㪇㪇 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪈㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㩿㫄㪘㪀 㪫㪸㪔㪈㪌㪇㷄 㪫㪸㪔㪈㪉㪌㷄 㪈㪇 㪫㪸㪔㪎㪌㷄 㪈 㪫㪸㪔㪉㪌㷄 㪇㪅㪈 㪈 㪇㪅㪈 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪈 㪇㪅㪇㪈 㪇 㪇㪅㪈 㪇㪅㪉 㪇㪅㪊 㪇㪅㪋 㪇㪅㪌 㪇㪅㪍 㪇㪅㪎 㪇㪅㪏 㪇㪅㪐 㪈 㪈㪅㪈 㪈㪅㪉 㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪝㩿㪭㪀 㪭㪝㪄㪠㪝㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪌 㪈㪇 㪈㪌 㪉㪇 㪈㪇㪇 㪝㪦㪩㪮㪘㪩㪛㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪝㩿㫄㪭㪀 㪽㪔㪈㪇㪇㪤㪟㫑 㪈 㪈 㪉 㪊 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪋 㪌 㪈㪅㪈 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪫㪸㪔㪉㪌㷄 㪠㪝㪔㪈㪇㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪈 㪇㪅㪐 㪘㪭㪜㪑㪏㪌㪈㪅㪇㫄㪭 㪇㪅㪏 㪇㪅㪎 㪇㪅㪈 㪇 㪇㪅㪈 㪈 㪝㪦㪩㪮㪘㪩㪛㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪝㩿㫄㪘㪀 㫉㪽㪄㪠㪝㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇㪇 㪈㪇 㪈㪇㪇㪇 㪝㪩㪜㪨㪜㪥㪚㪰㪑㪽䋨㪤㪟㫑䋩 㪈㪇㪇㪇㪇 㪭㪝㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪇㪅㪌 㪈㪇 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪊㪇㪭 㫅㪔㪊㪇㫇㪺㫊 㪏 㪎 㪍 㪌 㪋 㪊 㪘㪭㪜㪑㪇㪅㪌㪉㪇㫅㪘 㪌 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪤㪟㫑 㪭㪩㪔㪈㪭 㫅㪔㪈㪇㫇㪺㫊 㪇㪅㪋 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪐 㪇㪅㪍 㪚㫋㪄㪽㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪇㪅㪊 㪘㪭㪜㪑㪇㪅㪉㪈㪎㫇㪝 㪇㪅㪉 㪝㪦㪩㪮㪘㪩㪛㩷㪦㪧㪜㪩㪘㪫㪠㪥㪞 㪩㪜㪪㪠㪪㪫㪘㪥㪚㪜㪑㫉㪽㩿㱅㪀 㪝㪦㪩㪮㪘㪩㪛㩷㪦㪧㪜㪩㪘㪫㪠㪥㪞 㪩㪜㪪㪠㪪㪫㪘㪥㪚㪜㪑㫉㪽㩿㱅㪀 㪇 㪭㪩㪔㪇㪭 㪽㪔㪈㪇㪤㪟㫑 㪈㪇 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪇㪅㪇㪈 㪊㪇 㪈㪅㪇 㪽㪔㪈㪤㪟㫑 㪉 㪉㪌 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪚㫋㪄㪽㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪚㪫㪠㪚㪪 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪇㪇㪤㪟㫑 㪠㪝㪔㪊㫄㪘 㫅㪔㪈㪇㫇㪺㫊 㪋 㪊 㪘㪭㪜㪑㪈㪅㪏㪎㪇㱅 㪉 㪇㪅㪈 㪈 㪇 㪇 㪈 㪇 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㫉㪽㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪝㪦㪩㪮㪘㪩㪛㩷㪦㪧㪜㪩㪘㪫㪠㪥㪞 㪩㪜㪪㪠㪪㪫㪘㪥㪚㪜㪑㫉㪽㩿㱅㪀 㪌 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪇㪇㪤㪟㫑 㪠㪝㪔㪈㪇㫄㪘 㫅㪔㪈㪇㫇㪺㫊 㪋 㪊 㪉 㪘㪭㪜㪑㪇㪅㪐㪏㪇㱅 㪈 㪇 㫉㪽㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0