Spectrum Allocation for Short Range Devices on Shared Basis Frequency Band (MHz) Application Cordless Telephone Wireless Microphones RF Output power E.I.R.P. Max. Working Usage (mW) Range (m) (mW) a) 1.6065 - 1.8000 46.000 - 50.000 b) 46.000 - 50.000 46.000 - 50.000 c) 2400.0 - 2483.5 5150.0 - 5250.0 5250.0 - 5350.0 5470.0 - 5725.0 5725.0 - 5875.0 1000 100 1000 100 a) b) c) d) e) 100 100 100 100 100 36.4, 36.7, 37.0 - 38.0 85.0, 85.2 230.000 - 234.750 702.000 - 710.000 790.000 – 806.000 200 200 200 200 200 Wireless Video Transmitters a) 2400.0 - 2483.5 Remote Control Devices a) 27.00 (Remote Control Toys except Toy aircrafts) b) 26.965 - 27.405 300.5 - 305.0 (Telemetry devices, RF detection & Alarm, remote control of machines, cranes) Radio Equipment & Devices a) 26.965 - 27.405 b) 300.5 - 305.0 c) 433.925 d) 458.625 e) 868.000 f) 0.129 g) 0.125 100 100 100 100 100 100 100 100 100 100 200 100 10 10 10 10 10 50 50 100 100 Indoor Only Indoor Only Indoor Only Indoor Only Indoor Only 10 10 10 10 10 10 10 10 Indoor only (within the building) WLAN Equipment RFID a) 2400.0 - 2483.5 200 b) 5150.0 - 5250.0 200 c) 5250.0 - 5350.0 200 d) 5470.0 - 5725.0 200 e) 5725.0 - 5875.0 200 a) 13.56 b) 868 – 869 c) 920 - 924 100 100 Indoor only (within the building) Indoor only (within the premises) Indoor only (within the premises) Indoor only (within the premises) Indoor only (within the premises) 10 10 Note 01 : Licencing fee as per the Gazette No: 929/10 Note 02 : The word 'Indoor' should be defined as the property belonging to the party in concern (private/public) and should not extend beyond the boundaries of an area corresponding to the premises occupied by a person. Note 03 : The Indoor operations within the full ISM band (2.4 - 2.4835 GHz) is restricted to within a building as the band is not cleared yet. Note 04 : 5.250 – 5.350 GHz Band can be assigned after considering the requests for outdoor private networks on shared basis and it should not be connected to the public networks. Documents required to be submitted in order to issue Custom clearance letters 1. Request letter 2. Application Form 3. Copy of proforma/commercial invoice 4. Technical Specifications 5. Vendor’s Licence where applicable Documents required to be submitted in order to issue Type Approval letter for a model 1. Request letter 2. Application Form 3. Technical specifications 4. Copy of test reports issued by recognised testing agency 5. Copies of Type Approval Certificate (TAC) issued by other countries 6. Copy of Vendors Licence